goes2fast Posted February 2, 2015 Report Share Posted February 2, 2015 Getting ready for assembly. Looks so shiney! 1 Quote Link to comment
Farmer Posted February 3, 2015 Author Report Share Posted February 3, 2015 Draker, Haven't had any time to play with it, newer rental has smaller garage so the space is a little small. Still got to get gas setup too. 2 Quote Link to comment
denmarkboy Posted February 3, 2015 Report Share Posted February 3, 2015 i know your coming to canby , but is the 620 gonna make the trip also ? 1 Quote Link to comment
Farmer Posted February 3, 2015 Author Report Share Posted February 3, 2015 LOLOLOL ^^^^.......no...lolol Long ways from it. It will probably be Canby 2025 3 Quote Link to comment
Charlie69 Posted February 3, 2015 Report Share Posted February 3, 2015 Come on you can trailer it! Quote Link to comment
Farmer Posted February 10, 2015 Author Report Share Posted February 10, 2015 (edited) Pistons/rods and cranks installed.... Check Edited August 27, 2020 by Farmer 4 Quote Link to comment
Draker Posted February 10, 2015 Report Share Posted February 10, 2015 Man... I would be afraid to run this motor. You're gonna get it all dirty. 3 Quote Link to comment
Javin Posted February 10, 2015 Report Share Posted February 10, 2015 Man... I would be afraid to run this motor. You're gonna get it all dirty. I thinking the same thing Draker. I feel like this needs to be a piece of artwork. Though, the finished product installed I am sure will be. 2 Quote Link to comment
Charlie69 Posted February 10, 2015 Report Share Posted February 10, 2015 Hey farmer you going to hose off the truck before installing that pretty motor? LOL 1 Quote Link to comment
goes2fast Posted February 10, 2015 Report Share Posted February 10, 2015 Pistons/rods and cranks installed.... Check You have more than 1 crank? :rofl: 2 Quote Link to comment
Farmer Posted March 1, 2015 Author Report Share Posted March 1, 2015 (edited) Did something simple. Rust prevention on floor board wire wheel and sander, spray with rust converter. Every where bare metal and rust was, turned black exactly like it said. Edited August 27, 2020 by Farmer 3 Quote Link to comment
Farmer Posted March 28, 2015 Author Report Share Posted March 28, 2015 New run about and work truck. Actual build thread report Engine should be done soon. But wont be able to work on my truck for who knows how long. Have to move out of current rental by april and house we are moving into has NO garage. Trucks going in storage 2 Quote Link to comment
goes2fast Posted March 28, 2015 Report Share Posted March 28, 2015 Bummer, hate to hear that. :crying: 1 Quote Link to comment
Charlie69 Posted March 28, 2015 Report Share Posted March 28, 2015 Get a big enough storage so you can work on your truck. 1 Quote Link to comment
Farmer Posted April 3, 2015 Author Report Share Posted April 3, 2015 (edited) Most storage places wont let you work on anything I need a shop for business and pleasure Head getting worked over, cams (stock) fitted to new springs and valves. Ports ported. Just a final clean up and installed Edited August 27, 2020 by Farmer 3 Quote Link to comment
Farmer Joe Posted April 3, 2015 Report Share Posted April 3, 2015 what year was your KA from? 1 Quote Link to comment
Farmer Posted April 3, 2015 Author Report Share Posted April 3, 2015 Suppose to be a'92 2 Quote Link to comment
Farmer Posted May 15, 2015 Author Report Share Posted May 15, 2015 Actual build thread report Engine should be done soon. But wont be able to work on my truck for who knows how long. Have to move out of current rental by april and house we are moving into has NO garage. Trucks going in storage That rental I was supposed to move into didnt work out.......But thats fine with me. I found another with a three car garage. :w00t: :thumbup: Engine is done at builders, but had to use part of the monies to help with 1st, last, deposit. So wont be geting my engine any time soon 3 Quote Link to comment
]2eDeYe Posted May 15, 2015 Report Share Posted May 15, 2015 At least you'll have somewhere to work on it once you pick it up :) 3 Quote Link to comment
Charlie69 Posted May 16, 2015 Report Share Posted May 16, 2015 That rental I was supposed to move into didnt work out.......But thats fine with me. I found another with a three car garage. :w00t: :thumbup: Engine is done at builders, but had to use part of the monies to help with 1st, last, deposit. So wont be geting my engine any time soon Make small weekly payments on the engine. I had this situation a few years ago and lost my engine. If you are making payments on a regular basis it is harder for them to legally liquidate you engine. Also pictures of the 3 car garage or it did not happen! LOL Quote Link to comment
Farmer Posted May 17, 2015 Author Report Share Posted May 17, 2015 Also, Ive prepaid most of it already. Plus the guy is fine with it. He said since he has had it for over a year, holding on to it for know is no probelm 3 Quote Link to comment
Charlie69 Posted May 17, 2015 Report Share Posted May 17, 2015 I am guessing you live in a smaller sized town. Here in Phoenix after 30 days you do not own it any more. What color are you going to paint it? I am assuming that is black primer. 1 Quote Link to comment
Farmer Posted May 17, 2015 Author Report Share Posted May 17, 2015 I am guessing you live in a smaller sized town. Here in Phoenix after 30 days you do not own it any more. What color are you going to paint it? I am assuming that is black primer. Yes small town. Builder is a friend that owns a machine shop. He does alot of race engines for cars, boats, etc.... Plus he owns a 620 Engines not going anywhere.LOL Not sure what your talking about being primer black 2 Quote Link to comment
Charlie69 Posted May 20, 2015 Report Share Posted May 20, 2015 I was thinking this picture is in black primer. Now that you have a garage to work in we expect even more great things done to your 620! LOL 1 Quote Link to comment
goes2fast Posted May 20, 2015 Report Share Posted May 20, 2015 That is the brown the PO painted his orange truck. :thumbup: 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.