nbesheer Posted November 27, 2008 Report Share Posted November 27, 2008 Research showcars before you buy anything though. Quote Link to comment
zerow Posted November 27, 2008 Report Share Posted November 27, 2008 Holden is (essentially) the US General Motors in Australia. I thought I recognized the name, they are marketed as Opels in Europe. Plentiful as heck, insomuch that I knew of at least 10 owned by friends on post when I was in the Army. Had to be able to stop on a dime, Autobahns and all... As for an American cross-over part, probably not as likely, as that car was never marketed here. *Maybe* the late model Corsica, or some other mid-sized car of that shape and size. I would worry about any part like that, with GMs overall demise. :( Quote Link to comment
bonvo Posted November 28, 2008 Author Report Share Posted November 28, 2008 Research showcars before you buy anything though. i beleve this is the company compression got his left front fender from Quote Link to comment
Guest jaimesix Posted November 28, 2008 Report Share Posted November 28, 2008 P.S. jaimesix was that your red debumpered 710 at JCCS? friggin' sweet! Yes, it is mine, thanks for the good comment. I am puting together a stash of non US parts, front fenders, f & r bumpers and bumper brackets, front valance, grille, so it will look as Datsun Co. intended it to look. After the 610 's discharge from the beaters shop, the 710 will begine it's process. Known as 160J and Violet overseas. Cheers. Quote Link to comment
Guest jaimesix Posted November 28, 2008 Report Share Posted November 28, 2008 Holden is (essentially) the US General Motors in Australia. I thought I recognized the name, they are marketed as Opels in Europe. Plentiful as heck, insomuch that I knew of at least 10 owned by friends on post when I was in the Army. Had to be able to stop on a dime, Autobahns and all... As for an American cross-over part, probably not as likely, as that car was never marketed here. *Maybe* the late model Corsica, or some other mid-sized car of that shape and size. I would worry about any part like that, with GMs overall demise. :( About the demise of the three stooges, that is a posibility. I was impressed by the fact it is a bolt on swap. If GM falls over, perhaps Holden will survive over there, because Holden , unlike it's parent company GM, has been a successful enterprise all along. If I get the parts for my 710, I will also get a couple sets of brake pads, and a couple caliper rebuild kits, to assure a good period of tranquility and trouble free driving. Will keep you guys posted here at the official Datsun 610 thread. Jaime._____________________________________________________ Quote Link to comment
Guest jaimesix Posted November 28, 2008 Report Share Posted November 28, 2008 here's what i was talkin' about, hopefully this link wurkses. http://www.showcars-bodyparts.com/datsun.html cheers I have always wondered about that company. When I had my powerfull B210, I inquired a couple times about overfender flares and other parts, but I never got a reply:( Keep us posted!! Jaime.________________________________________________________ Quote Link to comment
nbesheer Posted November 28, 2008 Report Share Posted November 28, 2008 well i didn't want to throw this out there, i don't want to be the guy talking crap on a company that i've never dealt with before. but here is a thread from HBZ http://forums.hybridz.org/showthread.php?t=113366&highlight=showcars cheers! and i hope if you do deal with them that you have a better experiance. Quote Link to comment
sliding_creep Posted November 29, 2008 Report Share Posted November 29, 2008 thanks for the info nbesheer! good play! i will go through another source, and will definitely keep you all posted on whats i finds :thumbup: cheers Quote Link to comment
13bvw Posted November 29, 2008 Report Share Posted November 29, 2008 Holden is (essentially) the US General Motors in Australia. I thought I recognized the name, they are marketed as Opels in Europe. Plentiful as heck, insomuch that I knew of at least 10 owned by friends on post when I was in the Army. Had to be able to stop on a dime, Autobahns and all... As for an American cross-over part, probably not as likely, as that car was never marketed here. *Maybe* the late model Corsica, or some other mid-sized car of that shape and size. I would worry about any part like that, with GMs overall demise. :( You could try a pontiac GTO(new one last few years) as it is just a 2 door commodore or Monaro in Aus Quote Link to comment
Burabuda Posted November 29, 2008 Report Share Posted November 29, 2008 the bad guys in this japanese tv show from the 1980's are driving a white sharknose 610: seibu keisatsu episode 38 Quote Link to comment
bonvo Posted December 2, 2008 Author Report Share Posted December 2, 2008 lol sure enough he is good eye man Quote Link to comment
Guest jaimesix Posted December 3, 2008 Report Share Posted December 3, 2008 (edited) You could try a pontiac GTO(new one last few years) as it is just a 2 door commodore or Monaro in Aus Pontiac GTO, that is an Australian ride, that is true. I will investigate. Thanks. the bad guys in this japanese tv show from the 1980's are driving a white sharknose 610:seibu keisatsu episode 38 I saw a white 610 being used by the mobsters in a drive by shooting. Smart move, you want a performance car for a getaway, not a wimp italian wannabie ride!:lol: Edited December 3, 2008 by jaimesix Quote Link to comment
13bvw Posted December 3, 2008 Report Share Posted December 3, 2008 Pontiac GTO, that is a Australian ride, that is true. I will investigate. Thanks. I saw a white 610 being used by the mobsters in a drive by shooting. Smart move, you want a performance car for a getaway, not a wimp italian wannabie ride!:lol: I think they may also be the same as corvette calipers from the late 80's early 90's Quote Link to comment
Guest jaimesix Posted December 3, 2008 Report Share Posted December 3, 2008 Corvette Calipers from the late 80's early 90's??. That is awesome, a bolt on caliper upgrade like that would add braking power. Will check it out. Thanks. Jaime.________________________________________________________ Quote Link to comment
bonvo Posted December 3, 2008 Author Report Share Posted December 3, 2008 mmmmmmmmmmm corvette brakes Quote Link to comment
bonvo Posted December 10, 2008 Author Report Share Posted December 10, 2008 (edited) this is one of my favorite pics on a lighter note anyone know how different a stock z car swaybar is from an aftermarket one for the 610? obviously diamiter would be different but would it work width wise? Edited December 10, 2008 by bonvo Quote Link to comment
Devil-Z Posted December 23, 2008 Report Share Posted December 23, 2008 I've wanted a 610 ever since I saw this one at the L.A. Z car convention several years ago. 1 Quote Link to comment
datzenmike Posted December 23, 2008 Report Share Posted December 23, 2008 That's the way the bumpers should look! 1 Quote Link to comment
Edz280zx Posted December 23, 2008 Report Share Posted December 23, 2008 I've wanted a 610 ever since I saw this one at the L.A. Z car convention several years ago. That's a nice damn car..meshies would look killer on it. Quote Link to comment
zerow Posted December 24, 2008 Report Share Posted December 24, 2008 That's a nice damn car..meshies would look killer on it. The guy who owns this car lurks around here often. I talk to him about joining about as often. The car won at JCCS last year (2007). I have to agree, a good looking 610, but I know of a better looking one... Quote Link to comment
bonvo Posted December 24, 2008 Author Report Share Posted December 24, 2008 I know of a better looking one... let me guess your sedan? jamies 2 door? Quote Link to comment
zerow Posted December 24, 2008 Report Share Posted December 24, 2008 let me guess your sedan? jamies 2 door? Well, it's not mine, as I would have pics of my sedan. And being one of the few 610 sedans out there, well, you get the picture. Jaime's car is Jaime's car. It would be like posting pics of someone else's wife. His car looks great, can't wait for some "family" photos with my sedan at some far flung industrial yard. No, I have seen some damn nice 610s up close, I just want to taunt this guy into showing some more of the "others"...:P Quote Link to comment
Edz280zx Posted December 24, 2008 Report Share Posted December 24, 2008 You guys talking about Datsunfreaks? Quote Link to comment
zerow Posted December 24, 2008 Report Share Posted December 24, 2008 You guys talking about Datsunfreaks? No. However, Datsunfreak has a damn good looking 610 as well. There are too few of us 610 owners not to know who this guy is. Quote Link to comment
bonvo Posted December 24, 2008 Author Report Share Posted December 24, 2008 No. However, Datsunfreak has a damn good looking 610 as well. There are too few of us 610 owners not to know who this guy is. i know who his car is the same color as mine:D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.