datsunaholic Posted October 8, 2010 Report Share Posted October 8, 2010 I'm moving from South Tacoma/Parkland and I'd rather not move or scrap this stuff. All parts pick-up only, I don't have time to ship. Loose parts: 78-81 510 2-door sedan doors, blue, $20 each, complete I think. 78-81 510 hood, blue, $25 80-81 (might fit 78-79) 510 sedan gas tank, $10. '80-81 510 grille, $10 '80-81 510 headlight assemblies (square) $5 '80-81 510 interior parts, blue, basically a gutted 2-door but some parts were from a Wagon, they're all mixed up and in boxes, $20 for everything, and a bunch of exterior trim is mixed in. '71-ish 521 passenger side door, weatherworn, offwhite, $15 Has burgundy interior panel. I might, but no guarantee, have the driver's side interior too. '70-72 521 Passenger side fender, green, straight, $45 '72 510 Wagon rear hatch, not straight but usable- has good glass, $10 '78 510 automatic trans, worked when pulled (in 1993), $15 280ZX turbo "T-5" transmission, with shifter, $175 521 grilles and headlight surrounds, $50/set for clean, $$25/set for ones with gold spray paint all over them. 720 doors, L & R, were painted with a brush but have glass and aren't all dented up, $10 each. 620 door shell, driver's side, also painted with a brush, but could be cleaned up, no hardware at all, $5. Set of 4 14" turbine wheels, 4-lug, have old tires on them and need cleaning up, $80 Engines (will need somthing to lift it though, my engine hoist broke and needs a new hydraulic cyl.) '78 280Z engine, smoked, has manifolds and most EFI stuff still on it, a few parts gone (thermo housing), $50... '78-79 620 engine, longblock, not locked up but otherwise unknown, $100 Late-model L16 longblock with W53 head, no manifolds, dist, or flywheel, $150 '69 J13, ran when pulled, attached to bad transmission, $125 Z24 with blown head gasket, $25 Z20S shortblock with L18 flattop pistons (no valve detents) $100, had been "converted" into L20B but no head. KA24 shortblock (no head, pan, has timing cover though), dunno what it came from, has bearing girdle so I think that means 240SX, been outside so it's probably a lost cause, $5. All items are in Parkland, WA. There's also a bunch of stuff I'd give away, but I need to sort the stuff out. I don't have any pictures, but once I move the stuff I want to keep, I'll probably lay out everything I don't want to move or am willing to sell in the garage and then have a Datsun garage sale. I do need to clear out the place though so I can either sell or rent out the house. And, if there's stuff you know I have and haven't listed, ask me and make an offer, I might sell it too. That goes for everything I've got, complete cars and trucks too. Datsun Cars I'd sell, '78 B210 (engine had broken rings, probably locked up now) for $150, a '76 longbed 4X4 but needs the transfer case reinstalled, $500, an '81 510 wagon with Z24 and Automatic but has smoking problems, $200, and a '72 521 project with a dead Ford V-6 in it (super-straight cab, homemade flatbed, $200). For the right price I'll sell anything at this point, gotta reduce the amount. Link to comment
Braden Posted October 8, 2010 Report Share Posted October 8, 2010 i know you said no ship but dude man!!!!! come on it would hurt to ship one or two thing if you were re imbursed properly??? wagon hatch glass to 42503???????????????? in dyer need man, help a fellow datsun guy out!! Link to comment
GERMS Posted October 9, 2010 Report Share Posted October 9, 2010 I need 620 interior door handle bezels, floor shifter rubber boot, rear view mirror, if you have minty looking rear tail light bezels...those too, and finally, door locks with key. Link to comment
datsunaholic Posted October 9, 2010 Author Report Share Posted October 9, 2010 ghettobraden: I doubt I could get the wagon hatch glass out without breaking it, and my packing skills suck- I could ship an anvil and it'd show up broken. When I say I don't have time to ship, I really mean it. I haven't seen my house in daylight 5 times in the last 3 weeks. And now I'm trying to move 70 some miles North, and repair 2 houses simultaneously (one to live in and the other to sell or rent out). Germz12: Fresh out of door bezels except the ones in the doors I'm selling whole. All my shift boots are shredded. Too bad I don't work at the rubber factory anymore, because a boot from a Kenworth actually fit half decent. Door locks, nope, the matched sets went into trucks I drive, so I have a bunch of matched keyless ones now. Mirror I've got, but it depends on year. '72-77 ones are different from 78-79 ones, and the early ones I have are VERY weatherchecked. Not really worth the cost of shipping even if I did. Link to comment
izzo Posted October 9, 2010 Report Share Posted October 9, 2010 interested in naps z stuff, pm coming Link to comment
I'm BLUE Posted October 9, 2010 Report Share Posted October 9, 2010 280ZX turbo "T-5" transmission, with shifter, $175 You have PM :D Link to comment
GERMS Posted October 9, 2010 Report Share Posted October 9, 2010 ghettobraden: I doubt I could get the wagon hatch glass out without breaking it, and my packing skills suck- I could ship an anvil and it'd show up broken. When I say I don't have time to ship, I really mean it. I haven't seen my house in daylight 5 times in the last 3 weeks. And now I'm trying to move 70 some miles North, and repair 2 houses simultaneously (one to live in and the other to sell or rent out). Germz12: Fresh out of door bezels except the ones in the doors I'm selling whole. All my shift boots are shredded. Too bad I don't work at the rubber factory anymore, because a boot from a Kenworth actually fit half decent. Door locks, nope, the matched sets went into trucks I drive, so I have a bunch of matched keyless ones now. Mirror I've got, but it depends on year. '72-77 ones are different from 78-79 ones, and the early ones I have are VERY weatherchecked. Not really worth the cost of shipping even if I did. So you only have the door handle bezels? Are they black? Link to comment
tdaaj Posted October 9, 2010 Report Share Posted October 9, 2010 doug i'd like to get that king cab off ypou, could be pout there tomorrow with trailer and truck. will give you a call tonight. Link to comment
Jester Posted October 9, 2010 Report Share Posted October 9, 2010 Hey Ted, If your going up there ANYWAY, how about you grab that hatch, sell the glass to Braden, then you could sell me the grab handle and mount. Link to comment
Skib Posted October 9, 2010 Report Share Posted October 9, 2010 will you take some pics of the L28 when you get a chance. not in a hurry or anything but deff interested ;) Link to comment
Braden Posted October 9, 2010 Report Share Posted October 9, 2010 so many parts, so cheap, so far away!!!!!! FUCK!!!!!!!!!!! 1 Link to comment
Rubberman Posted October 9, 2010 Report Share Posted October 9, 2010 "Set of 4 14" turbine wheels, 4-lug, have old tires on them and need cleaning up, $80" Someone go pick these up, take tires off them, ship them to me, and make some money off me. Link to comment
datsunaholic Posted October 10, 2010 Author Report Share Posted October 10, 2010 Edited post. The 620 parts truck and all parts that were on it is gone. As is the Ford f250... in fact it left towing the parts truck. Hopefully they make it to Tenino without too much issue. Link to comment
Cuts metal like mad Posted October 10, 2010 Report Share Posted October 10, 2010 Ted is already past Roy. So, so far so good. Ford was running pretty good when it left, so I doubt there will be an issue. Also, I noticed only a green 521 PASSENGER fender in your shed. Link to comment
bonvo Posted October 10, 2010 Report Share Posted October 10, 2010 damn if i had money i would take the slotmags Link to comment
datsunaholic Posted October 10, 2010 Author Report Share Posted October 10, 2010 Also, I noticed only a green 521 PASSENGER fender in your shed. You're right. I was going by memory, and the 521 that the fender was supposed to go on had a destroyed DRIVER'S side, so it should have had that fender as a spare, but it didn't. Link to comment
]2eDeYe Posted October 10, 2010 Report Share Posted October 10, 2010 Not offing a 4x4 cheap are ya? :D Link to comment
tdaaj Posted October 11, 2010 Report Share Posted October 11, 2010 thank you for the trucks, both made it home safely. wish i could afford more from you. Link to comment
Logical1 Posted October 11, 2010 Report Share Posted October 11, 2010 Sold The L18 Yet? If not, interested in it :) Link to comment
hang_510 Posted October 11, 2010 Report Share Posted October 11, 2010 wagon hatch glass to 42503 PM sent Link to comment
Xander_42 Posted October 12, 2010 Report Share Posted October 12, 2010 "'81 Z20S that had water from blown manifold gasket, did run when pulled but hasn't been opened, $25" Interested. PM Sent. Link to comment
datsunaholic Posted October 17, 2010 Author Report Share Posted October 17, 2010 Edited. One Z20 is gone. In addition, I've also scrounged out some non-Datsun parts in my new place that were left behind by the prior owner. I sold most of it today, but I still have 2 hoods for '65-67 ish Chevelles (not high grade, but serviceable), 2 mid-60s Chevelle dash facias and speedometers, a door for a '69 Camaro, and 2 Camaro trunk lids. There's also a GM V-6, probably a 4.3 but I can't tell, attached to a TH350. Found the remains of a '66 El Camino (roof cut off, no front clip) buried under the blackberries. THAT is going to be hard to get rid of. Link to comment
tdaaj Posted October 17, 2010 Report Share Posted October 17, 2010 Edited. One Z20 is gone. In addition, I've also scrounged out some non-Datsun parts in my new place that were left behind by the prior owner. I sold most of it today, but I still have 2 hoods for '65-67 ish Chevelles (not high grade, but serviceable), 2 mid-60s Chevelle dash facias and speedometers, a door for a '69 Camaro, and 2 Camaro trunk lids. There's also a GM V-6, probably a 4.3 but I can't tell, attached to a TH350. Found the remains of a '66 El Camino (roof cut off, no front clip) buried under the blackberries. THAT is going to be hard to get rid of. if i can get my chevy back on the road this week i'd be willing to bring a trailer and get all that stuff next weekend. Link to comment
datsunaholic Posted October 18, 2010 Author Report Share Posted October 18, 2010 I was going to put the GM stuff on CL. The guy who bought half of what was there said the Camaro parts might fetch a little cash, he hi-graded most everything else and snubbed a lot of it. The other guy said he might come back (without his buddy the hi-grader) for some other parts. They still left with a bed full. I've already spent half what they paid in trips to the garbage dump. Geez there was a lot of garbage. Still a lot more too. I don't know HOW someone could get the Elky carcass out of the field. It's on the wrong side of the fence nowhere near the road, and has no axle. It's also loaded to the bed rail with scrap metal (rusted parts, mostly). The V-6 is looking more like a 3.3 or 3.8. But it's buried under a workbench. Link to comment
tdaaj Posted October 19, 2010 Report Share Posted October 19, 2010 I was going to put the GM stuff on CL. The guy who bought half of what was there said the Camaro parts might fetch a little cash, he hi-graded most everything else and snubbed a lot of it. The other guy said he might come back (without his buddy the hi-grader) for some other parts. They still left with a bed full. I've already spent half what they paid in trips to the garbage dump. Geez there was a lot of garbage. Still a lot more too. I don't know HOW someone could get the Elky carcass out of the field. It's on the wrong side of the fence nowhere near the road, and has no axle. It's also loaded to the bed rail with scrap metal (rusted parts, mostly). The V-6 is looking more like a 3.3 or 3.8. But it's buried under a workbench. trailer and winch, or my one ton after i find a freakin pto drive for my winch. Link to comment
Recommended Posts