vex210 Posted August 6, 2014 Report Share Posted August 6, 2014 I have, I just need to up date my thread, it's just hard to work the car , being dad for the second time and loving it. Quote Link to comment
vex210 Posted August 6, 2014 Report Share Posted August 6, 2014 One more pic with tape up flares..:) 2 Quote Link to comment
Lonestar Posted August 6, 2014 Report Share Posted August 6, 2014 That's sweet! Still a little miffed you got them before me but still, to the victor goes the spoils they say! Looking sharp Vex, when you gunna get a motor back in it? Quote Link to comment
vex210 Posted August 6, 2014 Report Share Posted August 6, 2014 I'm doing a ka24de on it, cleaning the engine bay, filling with welds the small holes, one every other month. Trying to get as much info for this build. Quote Link to comment
sunny310 Posted August 6, 2014 Report Share Posted August 6, 2014 niicceeeee!!!! Quote Link to comment
Raggleflaggle Posted August 6, 2014 Report Share Posted August 6, 2014 Where is your build thread? Your profile says you haven't started any. Quote Link to comment
datsunfreak Posted August 6, 2014 Report Share Posted August 6, 2014 Where is your build thread? I think this is his build thread... ^_^ 1 Quote Link to comment
datsunfreak Posted August 6, 2014 Report Share Posted August 6, 2014 That's sweet! Still a little miffed you got them before me They only look good on coupes, anyway. ^_^ Quote Link to comment
vex210 Posted August 7, 2014 Report Share Posted August 7, 2014 I haven't seen them on a sedan, for sure there some. As the headlight, I think the (210)79 front would look good with skyline racing headlights covers with tilt. Here u go http://community.ratsun.net/topic/28561-first-post-210-member/.... 1 Quote Link to comment
datsunfreak Posted August 7, 2014 Report Share Posted August 7, 2014 I haven't seen them on a sedan, for sure there some. 1 Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 any of you guys ever detail engine bay and have trouble with dizzy working? car doesnt want to start been two weeeks 1 Quote Link to comment
datsunfreak Posted August 7, 2014 Report Share Posted August 7, 2014 Hot pink is my jam... B) Quote Link to comment
datsunfreak Posted August 7, 2014 Report Share Posted August 7, 2014 any of you guys ever detail engine bay and have trouble with dizzy working? car doesnt want to start been two weeeks Water in distributor cap? Knocked a wire loose on the coil? 1 Quote Link to comment
vex210 Posted August 7, 2014 Report Share Posted August 7, 2014 Dammmm.... Now if someone could photoshop a skyline headlights cover on it ....:) Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 checked all that the magnetic ring on the dizzy was cracked thinking in replacing the entire unit for a new one,,, it was running fine then think water got in somewhere checked distributor nothing no moister check carb nothin it tries to turn on i can hear it tryin but will not start so thinking replacing entire unit any ideas incase thats not it? Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 what year is that gold 210 man its sweet been trying to find those flares stateside for a while Quote Link to comment
B210GX Posted August 7, 2014 Report Share Posted August 7, 2014 any of you guys ever detail engine bay and have trouble with dizzy working? car doesnt want to start been two weeeks Spray WD40 in the distibutor and cap 1 Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 did that , how hard is it to change the distributor on a A14 ? Quote Link to comment
B210GX Posted August 7, 2014 Report Share Posted August 7, 2014 Easy Peasy.... Pull cap .... just look where your rotor is pointing Pull it out and put another one back in pointing to the same spot. Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 so mark off where rotor is pointing as in which cylinder number right... i dont have to find any angle or caliberate anything? i know that if you turn over motor while dizzi is not installed you have to mark off the timing and do alot more. so if im replacing entire thing it just drops in right? and i think theres only one bot holding it down.? 1 Quote Link to comment
B210GX Posted August 7, 2014 Report Share Posted August 7, 2014 Correct, the rotor will twist /rotate when pulling it out. So when putting it back in, you will have to accomodate for the twist. Yes one boLt :) You will still need to "TIME" the engine. do you have a timing light? 1 Quote Link to comment
JDOM310 Posted August 7, 2014 Report Share Posted August 7, 2014 no , i read up on other blogs and forums and i think its basically a on off easy installation because i havent turned the engine without the dizzy , from what i gathered if the entire part will be installed no timing needed except for lining up the rotor , i just want to be sure its only one bolt ordering the part from rockauto... for the price i hope i found the problem and and traced it correctly, thanks fellas do you know of any datsun A14 dizzy installation videos ? Quote Link to comment
B210GX Posted August 7, 2014 Report Share Posted August 7, 2014 what did you buy? and how much? Quote Link to comment
B210GX Posted August 7, 2014 Report Share Posted August 7, 2014 and "YES" you will have to time the distributor. its one bolt .....but the plate it goes through is slotted to be able to be timed. what year is your car? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.