69FJWagon Posted May 31, 2010 Report Share Posted May 31, 2010 thats not cool ...all the teaser shots.... :lol: looking good clayton.. Thanks. :D Jason does good work wish I lived closer so I could do more hands on help... here are a few videos Luke took before it went back to Jason to get refined. Quote Link to comment
71DIMER Posted May 31, 2010 Report Share Posted May 31, 2010 Sweet job Jason...very nice looking hardware there Clay...can't wait to see it down here! Quote Link to comment
jesusno2 Posted May 31, 2010 Report Share Posted May 31, 2010 God damn am I a sexy mother or what! Ya coulda warned me so I coulda posed a little better lol! Quote Link to comment
goes2fast Posted May 31, 2010 Report Share Posted May 31, 2010 Great work Jason, How long til kits are available? I love your engineering, and want a similar setup for my 620, but I want to run air bags in the rear, so I can still use it to haul stuff and keep the same ride hight. I just ordered Addco bars, and today I installed KYB Gasadjusts, so next payday I will be ready for my rear disc brackets. Tell me about those front discs on that project you just did, they look like a big improvement over stock. :cool: Quote Link to comment
BRE510 Posted May 31, 2010 Report Share Posted May 31, 2010 Clayton, Bring to JCCS so mine has someone to hang out with :) Looks awesome...KUDOS Quote Link to comment
Jester Posted May 31, 2010 Report Share Posted May 31, 2010 Sure wish I would have left the exhaust alone. That thing sounds like crap on video. Quote Link to comment
69FJWagon Posted May 31, 2010 Report Share Posted May 31, 2010 Sure wish I would have left the exhaust alone. That thing sounds like crap on video. Jes the exhaust has to be cut off before the rear end and redone anyway only about 1" before the axle tube hits it... :( Quote Link to comment
goes2fast Posted May 31, 2010 Report Share Posted May 31, 2010 Sure wish I would have left the exhaust alone. That thing sounds like crap on video. Get a Flowmaster Super 44, they have a deep tone and are great for performance. My Jeep had a high dollar Borla stainless exhaust system on it when I bought it, then I got rearended by some dumb flight attendant on the way to work. With the lift and big tires, the only thing that got damaged was the exhaust, it acordianed. I replaced it with a Dynomax tailpipe (mandrel bent) and Flowmaster Super 44, and my mileage went up 11/2 mpg, so very efficiant along with the great sound. I'm ordering one for my KC as soon as payday rolls around. :cool: Quote Link to comment
Farmer Posted May 31, 2010 Report Share Posted May 31, 2010 Mines Next!!!! Looking good Larry Quote Link to comment
69FJWagon Posted August 20, 2010 Report Share Posted August 20, 2010 So finally got my truck home and did a few things to try to make it my own... here are a few pictures from the drive home and after i did a few things repainted the grill changed the steering wheel and added a decal to the gas door (Thanks Steve)and the rear window (Thanks Mario) Quote Link to comment
DISLEXICDIME Posted August 20, 2010 Report Share Posted August 20, 2010 nice now do the dash piece Quote Link to comment
slodat Posted August 20, 2010 Report Share Posted August 20, 2010 nice now do the dash piece For sure!! Quote Link to comment
69FJWagon Posted August 20, 2010 Report Share Posted August 20, 2010 nice now do the dash piece For sure!! All in due time I have to redo the radio in it so when it comes out I will paint the dash piece or replace it if I can find a clean one Clayton Quote Link to comment
Bob3 Posted August 20, 2010 Report Share Posted August 20, 2010 This truck is Awesome!!! Great job. :thumbup: :thumbup: :thumbup: Quote Link to comment
]2eDeYe Posted August 20, 2010 Report Share Posted August 20, 2010 That truck looks great, nice work. :D Quote Link to comment
69FJWagon Posted August 20, 2010 Report Share Posted August 20, 2010 Jason Did a good job on everything...damn thing rides better than my WRX and is way lower too :lol: Quote Link to comment
Pacific coast Datsun Posted August 20, 2010 Report Share Posted August 20, 2010 Clean work guys...get her ready for JCCS :D Quote Link to comment
goes2fast Posted August 20, 2010 Report Share Posted August 20, 2010 Looking great! I can hardly wait to see what else you do to it, makes me wish mine was moving along faster. :cool: Quote Link to comment
69FJWagon Posted August 20, 2010 Report Share Posted August 20, 2010 Looking great! I can hardly wait to see what else you do to it, makes me wish mine was moving along faster. :cool: What else??? I dont have any money for what else :lol: way to many projects and not enough cash for all of them so as for now I have a few things that need to be done but then I am gunna concentrate on my turbo car and just drive the king cab, but when I can afford to it will eventually get a KA swap Quote Link to comment
BEEBANI Posted August 22, 2010 Author Report Share Posted August 22, 2010 here's the updated pictures of the rear sway bar and the front suspension and brakes moved the rear bar up and back to gain more ground clearance and less binding put more angle on the front coils to gain more spring rate, had Icehouse machine new aluminum hub adapters for the rotors Quote Link to comment
BEEBANI Posted August 22, 2010 Author Report Share Posted August 22, 2010 Here's some shots of Luke and I's trip to Weed to drop the truck off with Clayton Quote Link to comment
BEEBANI Posted August 22, 2010 Author Report Share Posted August 22, 2010 Ratsun salute! lovely town of Weed, California the trade off Quote Link to comment
Jester Posted August 22, 2010 Report Share Posted August 22, 2010 Would have been nice to know you were dropping it off. Quote Link to comment
69FJWagon Posted September 1, 2010 Report Share Posted September 1, 2010 Hmm... thinkin bout selling this thing to fund my other projects...undecided <_< Quote Link to comment
slodat Posted September 1, 2010 Report Share Posted September 1, 2010 Been there myself. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.