Pacific coast Datsun Posted January 13, 2010 Author Report Share Posted January 13, 2010 Slam most deffinatly i owe you & your wife a cruise :cool: I picked up a set of recovered Sentra seats today. Got em home & cleaned em up & got 1 in for a test fit. Theyre the same size as the 411 seats but new seat brackets will have to be made. Quote Link to comment
slam_dat_sun Posted January 13, 2010 Report Share Posted January 13, 2010 Aw hell them are hot ;) Quote Link to comment
1lo620 Posted January 13, 2010 Report Share Posted January 13, 2010 those look real good in there, just like they where made for it.... Quote Link to comment
motavated Posted January 13, 2010 Report Share Posted January 13, 2010 What year sentra? they look bad ass! Quote Link to comment
Pacific coast Datsun Posted January 14, 2010 Author Report Share Posted January 14, 2010 ""What year sentra? they look bad ass! "" It was the square body prob. a 88. Quote Link to comment
slam_dat_sun Posted January 14, 2010 Report Share Posted January 14, 2010 Are those the ones you are bringing to Phoenix with you to give to me to put in my 620 ? :blink: Quote Link to comment
Pacific coast Datsun Posted January 14, 2010 Author Report Share Posted January 14, 2010 Are those the ones you are bringing to Phoenix with you to give to me to put in my 620 ? :blink: The black seats have been promised to Steroid already. Quote Link to comment
lownslow Posted January 14, 2010 Report Share Posted January 14, 2010 Love the build. Keep up the good work. Quote Link to comment
slam_dat_sun Posted January 14, 2010 Report Share Posted January 14, 2010 The black seats have been promised to Steroid already. NO NO NO I mean the new ones :lol: Quote Link to comment
dat521kid Posted January 14, 2010 Report Share Posted January 14, 2010 oh snap, those look so cool in there Quote Link to comment
bob72gts Posted January 17, 2010 Report Share Posted January 17, 2010 Slam most deffinatly i owe you & your wife a cruise :cool: I picked up a set of recovered Sentra seats today. Got em home & cleaned em up & got 1 in for a test fit. Theyre the same size as the 411 seats but new seat brackets will have to be made. That seat is lookin good in there. I went back through the thread again and didnt see any mention of that console. Maybe I missed it. What did it come out of? Quote Link to comment
slam_dat_sun Posted January 18, 2010 Report Share Posted January 18, 2010 That seat is lookin good in there. I went back through the thread again and didnt see any mention of that console. Maybe I missed it. What did it come out of? If I am not mistaken it is out of a 1998 dodge neon Bob. Quote Link to comment
Pacific coast Datsun Posted January 18, 2010 Author Report Share Posted January 18, 2010 Bob, Slam- the console came out of a 2000 Neon. I believe they used the same consoles for a few years. I now have 1 seat bolted down, had to make risors for the inner track. Pics to come. Quote Link to comment
Pacific coast Datsun Posted January 26, 2010 Author Report Share Posted January 26, 2010 Today i got the DS seat mounted. Made brackets for the inner track so the seat sits level... Quote Link to comment
Steroid Posted January 31, 2010 Report Share Posted January 31, 2010 AWESOME!!!!!!!! One of the BEST junkyard finds ever!!!! Even the color matches!!!!! Congratulations!!!! Quote Link to comment
Pacific coast Datsun Posted April 13, 2010 Author Report Share Posted April 13, 2010 Ive been having trouble getting the 620 to start the last week. Removed & hand primed the fuel pump,no start. swapped on a different coil & cap,no start. replaced the HEI, no start. removed fuel pump again to hand prime carbs & i notice it's not sucking gas from the filter...SUPER ! Said f*ck it ill install the electric pump thats in the garage..........searched for 1 hour & cant find the pump...dbl.super !! Went ahead & put on the chrome block off plate & connected the 2 fuel lines & now ill have to buy another electric fuel pump. It never ends!! I swear i drove the truck 4 or 5 times last year, funny thing is everything under the hood is new & the motor has less that 1500 miles on it & yet it gives me the most issues of ALL my vehicles. I think the tweeker PO put a hex on the truck ! :angry: Quote Link to comment
motavated Posted April 13, 2010 Report Share Posted April 13, 2010 VOOODOOOO! I swear I have the same shit going on. ALL THE THINGS ARE NEW AND STILL THIS MOTHER FU**ER! Arggg!!!! I love her though.... Quote Link to comment
]2eDeYe Posted April 13, 2010 Report Share Posted April 13, 2010 Have you cleaned the tank yet? Quote Link to comment
Pacific coast Datsun Posted April 13, 2010 Author Report Share Posted April 13, 2010 2eDeYe' date='13 April 2010 - 03:51 PM' timestamp='1271199098' post='291465']Have you cleaned the tank yet? That was one of the 1st things i did when i got the truck. I have a chrome gas tank waiting to go in btw.......anybody have any leads on a electric fuel pump ? Quote Link to comment
DATSKAOS Posted April 14, 2010 Report Share Posted April 14, 2010 Hey Mark, no worries your 620 will live again :) How bout a 720 elec. pump? Quote Link to comment
JDM510 Posted April 14, 2010 Report Share Posted April 14, 2010 i have a brand new faucet with rubber isolation around it and rubber mounts for supper quite operation.. i got it for my car but would not work with the KA its for carb apps.. if you have a set of lowering blocks laying around with u bolts i would do a trade.. or im looking for a 4 speed tranny for a 620 Quote Link to comment
Pacific coast Datsun Posted April 14, 2010 Author Report Share Posted April 14, 2010 Ray i did think of using a 720 pump...Ill look for one next time im @ the yards. Looks like ill be picking up a stock Datsun fuel pump from Jose tomorrow just to get it on the road. Then i was inspired to fab a bracket for the HEI module & some velocity stacks for the SU's. ive had these stacks for years,,Ryan [in Seattle-san diego] gave them to me before he dissappeared... backing plates are 16 gauge & ill weld the stack to it... Quote Link to comment
bonvo Posted April 14, 2010 Report Share Posted April 14, 2010 those stacks will be bad ass are they gonna clear the master on the rear carb? it looks close with the air filter back there Quote Link to comment
fisch Posted April 14, 2010 Report Share Posted April 14, 2010 Pac I am totally digging those seats. They look way more retro than they are! And the color is simply great! Quote Link to comment
sdsurf Posted April 14, 2010 Report Share Posted April 14, 2010 Mark, that engine is meant to run on that mechanical pump. with as long as it has sat, try turning it over with a gas can to get fuel close... Call me I may have time to help... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.