Dguy210 Posted May 19, 2023 Report Share Posted May 19, 2023 (edited) 12 hours ago, datsunfreak said: I dig that grill emblem, but damn are they expensive... I actually like the facelift look one more personally, but yeah super expensive. https://www.ebay.com/itm/374296171601 $310 is a bit much for a piece of plastic ($280 but sold out other places). Of course as I'm a cheap bastard I'd likely just model it up and 3D print a replica of it if I was so inclined. Could do this one of course too.... Or just to be different do this style, which wouldn't be too hard to get family in Taiwan to send me. Edited May 19, 2023 by Dguy210 2 Quote Link to comment
datsunfreak Posted May 22, 2023 Report Share Posted May 22, 2023 On 5/19/2023 at 1:38 AM, Dguy210 said: I actually like the facelift look one more personally, but yeah super expensive. Me too. Just never could find one for sale when I was looking. On 5/19/2023 at 1:38 AM, Dguy210 said: Could do this one of course too.... I have one of these brand new, still in the Nissan box, if you decide to go that way. 👍 1 Quote Link to comment
Fat510 Posted June 6, 2023 Report Share Posted June 6, 2023 Barrowed my dad's door while it gets painted. 1 Quote Link to comment
Morrisun Posted June 7, 2023 Report Share Posted June 7, 2023 Brilliant, so you can make the show on Sunday! 2 Quote Link to comment
Dguy210 Posted June 7, 2023 Report Share Posted June 7, 2023 (edited) I finally have the title in hand, it is insured, and a move permit for July coming soon, so it will be getting registered and on the road in the not to distant future. Also, now have tunes and a tach setup (done without cutting up the dash), although the rear speaker setup is kinda sketch still. Front speakers are on the kickpanels, current crap radio in the glovebox (very thin single din) and I'll be running usb cable out so that I can just plug in a drive and bam, music (all posted in the 3D thread). Also, been playing with chrome paint on a 3D printed badge (FDM) still considering ordering some conductive paint (expensive) to do electroplating. I also think I've figured out how to replicate the color with some semi-translucent tinted resin but still need to do some tests and buy some dyes. Currently easily good enough for 10 foot but I want to get it looking as close as possible. Edited June 7, 2023 by Dguy210 1 Quote Link to comment
Dguy210 Posted June 7, 2023 Report Share Posted June 7, 2023 (edited) On 6/6/2023 at 6:53 PM, Morrisun said: Brilliant, so you can make the show on Sunday! Which show is this? I know KIOS is on Saturday, but what is on Sunday? EDIT: nevermind figured it out, the one in Tacoma Edited June 9, 2023 by Dguy210 1 Quote Link to comment
Derek Harris Posted June 9, 2023 Report Share Posted June 9, 2023 On 6/6/2023 at 11:02 PM, Dguy210 said: I finally have the title in hand, it is insured, and a move permit for July coming soon, so it will be getting registered and on the road in the not to distant future. Also, now have tunes and a tach setup (done without cutting up the dash), although the rear speaker setup is kinda sketch still. Front speakers are on the kickpanels, current crap radio in the glovebox (very thin single din) and I'll be running usb cable out so that I can just plug in a drive and bam, music (all posted in the 3D thread). Also, been playing with chrome paint on a 3D printed badge (FDM) still considering ordering some conductive paint (expensive) to do electroplating. I also think I've figured out how to replicate the color with some semi-translucent tinted resin but still need to do some tests and buy some dyes. Currently easily good enough for 10 foot but I want to get it looking as close as possible. Very Nice! I have a question, what is the measures of the radio delete plate? Quote Link to comment
Dguy210 Posted June 9, 2023 Report Share Posted June 9, 2023 2 hours ago, Derek Harris said: Very Nice! I have a question, what is the measures of the radio delete plate? Do you need the dimensions for a 1200 radio delete plate or a 620 delete plate? For a 1200 plate I'd have to go back to the file and look as a 1200 delete plate is just a bit smaller than a 620 plate... if you need dimensions for a 620 delete plate I have one right here and the measurements are as follows: Height is 60.57 mm assume 60.6 mm as is there is some minor warping due to age. Length is 186.5 mm Quote Link to comment
bananahamuck Posted June 12, 2023 Report Share Posted June 12, 2023 (edited) On 6/6/2023 at 6:53 PM, Morrisun said: Brilliant, so you can make the show on Sunday! Both cans were primer . We bought every dark green autozone, Oreillys, Ace hardware and Home Depot had ,, none came close enough when sprayed out ,,, ended up satin black . I guess that’s almost a step up from flat black .. 😆 . Edited June 12, 2023 by bananahamuck Quote Link to comment
Dguy210 Posted June 26, 2023 Report Share Posted June 26, 2023 New tires, wheels cleaned up and repainted. Road legal as of July 1st, ready for shakedown runs longer than me doing donuts on my property. 2 Quote Link to comment
Dguy210 Posted July 4, 2023 Report Share Posted July 4, 2023 (edited) Now legally registered and with a few miles on the road. Drives nice and straight and very well, the KA has enough power and the car is light enough you can basically take off in any gear without a problem. After some testing decided to fab up heatshields for the exhaust manifold and brake master cylinder. Definitely helped cut down on heat in the engine bay and temp of the brake fluid reservoirs. Having done some driving, to do items include getting a different speedo gear for the transmission as it is off about 20%, trying to find a quieter electric fuel pump(s) and working out all the various noises. It is fast, loud, and rides like a race car (i.e., really feel the bumps due to the stiffening needed for the rear). Even with a cherry bomb as resonator and turbo muffler it still has a louder than I like exhaust note, I'll probably spring for a more restrictive and new muffler or put in a second one if I can find some space to cram it in as everything is already very tightly packed on this car. Diff seems a bit noisy especially when going downhill in gear (checked trans and diff fluid) and diff doesn't get hot. I've got a spare 510 wagon diff so might just swap it out tomorrow as I have the day off and see if that makes a difference. I also have a spare 5spd trans (actually for the 510) if that turns out to be the problem. No images as Ratsun is not cooperating today. It verks... Edited July 4, 2023 by Dguy210 1 Quote Link to comment
Morrisun Posted July 5, 2023 Report Share Posted July 5, 2023 What I am doing lately is lightening the load of Datsun 1200 parts. IF you are going to be AT Powerland this coming Saturday and Sunday and need 1200 parts, send me a message and I will see if I have what you are looking for..? I have USED parts.. See you there. 1 Quote Link to comment
datsunfreak Posted July 10, 2023 Report Share Posted July 10, 2023 On 7/4/2023 at 1:08 AM, Dguy210 said: trying to find a quieter electric fuel pump(s) In the tank, or external? If external, it may just be how you have it mounted? A nice squishy rubber mount seems to quiet them down sometimes. 1 Quote Link to comment
Dguy210 Posted July 11, 2023 Report Share Posted July 11, 2023 6 hours ago, datsunfreak said: In the tank, or external? If external, it may just be how you have it mounted? A nice squishy rubber mount seems to quiet them down sometimes. Lol, Morrisun and I had this same discussion on Sunday actually. External and already rubber mounted, low pressure/high volume feeding a high pressure FI pump (setup like the 80s VWs sort of did it) with a very large fuel filter as a surge tank. Both mounted to an aluminum mount as a whole unit and with a HDPE plastic shielding to protect it and tucked up in that spot in front of the rear passenger wheel. In the tank would be the real solution... but I'm cheap and lazy so I'm probably going to screw around with some other sub-optimal solutions first. Quote Link to comment
datsunfreak Posted July 11, 2023 Report Share Posted July 11, 2023 7 hours ago, Dguy210 said: In the tank would be the real solution... And the quietest. 😁 1 Quote Link to comment
Dguy210 Posted July 16, 2023 Report Share Posted July 16, 2023 On 7/11/2023 at 4:40 AM, datsunfreak said: And the quietest. 😁 And... after some thought I do have a solution... gonna build a surge tank and put the pump inside. 1 Quote Link to comment
datsunfreak Posted July 19, 2023 Report Share Posted July 19, 2023 On 7/15/2023 at 7:36 PM, Dguy210 said: gonna build a surge tank and put the pump inside. This is the way. 😁 1 Quote Link to comment
Dguy210 Posted September 11, 2023 Report Share Posted September 11, 2023 So... instead of changing out the rear differential or troubleshooting the fuel system some more I did this instead. Thanks Morrisun. Note: I actually bolted this onto a spare trunk lid as I had to drill holes and then swapped the whole lid. 3 Quote Link to comment
Tom1200 Posted October 5, 2023 Report Share Posted October 5, 2023 Raced it...................I count that as done to. 2 Quote Link to comment
iceman510 Posted October 6, 2023 Report Share Posted October 6, 2023 Dang, you're making me lament the end of the season already. Quote Link to comment
KELMO Posted October 17, 2023 Report Share Posted October 17, 2023 Say now, what is up with that other 1200 in the garage? Tom, I think you are holding out on us.😁 Quote Link to comment
Dguy210 Posted October 19, 2023 Report Share Posted October 19, 2023 On 9/10/2023 at 9:02 PM, Dguy210 said: So... instead of changing out the rear differential or troubleshooting the fuel system some more I did this instead. Thanks Morrisun. Note: I actually bolted this onto a spare trunk lid as I had to drill holes and then swapped the whole lid. Well, finally got tired of the diff being loud and decided to change, at which point I started looking into the fuel system and ended up replumbing the return lines. In progress pic, haven't gotten a chance to test it much except for the fuel system. 1 Quote Link to comment
Tom1200 Posted December 11, 2023 Report Share Posted December 11, 2023 Kelmo, That's Stan's coupe; it's utterly immaculate. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.