Carwson Posted January 20, 2014 Report Share Posted January 20, 2014 Went out to pick-n-pull today and found a center console. Just need to paint it. also found a can of Datsun Tire Inflator in the back of a 280zx Quote Link to comment
Just Joel Posted January 20, 2014 Report Share Posted January 20, 2014 lol... neat :) ^^^^ Quote Link to comment
danfiveten Posted January 20, 2014 Report Share Posted January 20, 2014 Ordering a carb from national carb tomorrow for Blue, only 220 bucks with a warranty, hoping thsi fixes my issue, specially sicne the carb is pissing fuel due to a stripped school and shit. Think thats my issue, when i drive on good speeds the fuel is burning off like normal, but when i sit and idle, the fuel is pissing out onto and in the manifold, pooling up, and then i run like shit untill i burn it all out of the car. Makes sense now that i know how much fuel its pissing. Quote Link to comment
Just Joel Posted January 20, 2014 Report Share Posted January 20, 2014 Got this ready to do that... 2 Quote Link to comment
macgyver Posted January 20, 2014 Report Share Posted January 20, 2014 What console is that? Looks great! Went out to pick-n-pull today and found a center console. Just need to paint it. Quote Link to comment
Carwson Posted January 21, 2014 Report Share Posted January 21, 2014 What console is that? Looks great! I pulled it out of a earlier 2000 Dodge Neon and the shift boot is out of a PT cruiser because the boot it had was destroyed. Quote Link to comment
510T Posted January 23, 2014 Report Share Posted January 23, 2014 Today I test fit my new wheels, pretty happy with it :D Moar oics in ma 'build thread' VVV 3 Quote Link to comment
demo243 Posted January 23, 2014 Report Share Posted January 23, 2014 Today I test fit my new wheels, pretty happy with it :D Moar oics in ma 'build thread' VVV Gonna look awesome! 1 Quote Link to comment
Big_E-Dog Posted January 24, 2014 Report Share Posted January 24, 2014 finally got around to installing the HUD to the digital guage i have....i put it in the center now i can barley see it. gonna have to relocate and hack up the defroster duct......DAMN! Quote Link to comment
mattyhacks71 Posted January 26, 2014 Report Share Posted January 26, 2014 Painted these Popped in new hood bumpers My hood sits nice now :lol: Quote Link to comment
scooter stuff Posted January 26, 2014 Report Share Posted January 26, 2014 painted som stuff. 2 Quote Link to comment
Just Joel Posted January 26, 2014 Report Share Posted January 26, 2014 Finished up the trany tunnel mods... Quote Link to comment
Big_E-Dog Posted January 26, 2014 Report Share Posted January 26, 2014 Finished up the trany tunnel mods... hey i want to do this but im interested in one thing.....is the rear seat still fully functional (can be folded up and down still like regular? because i looked under my wagon and saw rub marka where the driveshaft u jount is and im pretty shure its rubbing aganst the body. Quote Link to comment
Just Joel Posted January 27, 2014 Report Share Posted January 27, 2014 Yes, if your careful ;) I actually made a mold of modeling clay before I made the metal piece. I still choose to massage the seat pan a little to get just as much clearance as could. Quote Link to comment
Just Joel Posted January 27, 2014 Report Share Posted January 27, 2014 Today's progress... All and all, a successful weekend :) it's guna be nice getting the battery out of the cargo area. 3 Quote Link to comment
SIXTY-NINE-DIME Posted January 27, 2014 Report Share Posted January 27, 2014 Well, last week I fried my MSD unit, so today i had to swap it with the old 620 ignition module and went out for a cruise. Don't mind the rake, I was planning on getting on a lift. 2 Quote Link to comment
dime'n daily Posted January 27, 2014 Report Share Posted January 27, 2014 kicked mine and screamed at it. and then cried cause its not done yet or drivable at least 1 Quote Link to comment
datsunfreak Posted January 27, 2014 Report Share Posted January 27, 2014 Any chance you have a big version of this photo? :wub: Well, last week I fried my MSD unit, so today i had to swap it with the old 620 ignition module and went out for a cruise. Don't mind the rake, I was planning on getting on a lift. Quote Link to comment
SIXTY-NINE-DIME Posted January 27, 2014 Report Share Posted January 27, 2014 Any chance you have a big version of this photo? :wub: Sorry man, thats all i got =[ Quote Link to comment
SIXTY-NINE-DIME Posted January 27, 2014 Report Share Posted January 27, 2014 I really need to invest in a camera. Quote Link to comment
datsunfreak Posted January 27, 2014 Report Share Posted January 27, 2014 Yeah, you do. That would make an awesome wallpaper. :thumbup: 1 Quote Link to comment
Ranman72 Posted January 27, 2014 Report Share Posted January 27, 2014 so today I drove it to Tognotties and got some zinc additive and a cup holder went to auto zone and got oil and filter changed the oil and filter added zinc installed new rubber muffler hangers and hopefully fixed the squeak in the passenger seat out with the old in with the new new cup holder still have to screw it down a little cussing and such and new rubbers installed Quote Link to comment
RTB Posted January 27, 2014 Report Share Posted January 27, 2014 Put in a slotted crossmember for the rear. I put some 4x4 blocks instead of springs because I'm getting different arms sandblasted and painted this week. Blocks must have slid down as I lowered the car because it got way too low and I think I popped the shocks. Fucking pissed. :frantics: Quote Link to comment
Busta Nut Posted January 29, 2014 Report Share Posted January 29, 2014 Clean and paint...... 1 Quote Link to comment
Just Joel Posted January 29, 2014 Report Share Posted January 29, 2014 So fresh and so clean B) 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.