ggzilla Posted May 4, 2014 Author Report Share Posted May 4, 2014 Is that at LQK Pick a Part Sun Valley or Pick n Pull Sun Valley? Quote Link to comment
Cleopatra Jones Posted May 4, 2014 Report Share Posted May 4, 2014 It's at the LKQ on Pendleton in Sun Valley. Here's all the stuff I grabbed. May be going back tomorrow morning. 2 Quote Link to comment
ggzilla Posted May 4, 2014 Author Report Share Posted May 4, 2014 AM/FM! we had to get by with AM only back in the day. Quote Link to comment
Cleopatra Jones Posted May 4, 2014 Report Share Posted May 4, 2014 I'm pretty sure my original radio was an AM. I chucked that years ago. Always had a different radio in there until my resto and then I scored a NOS AM/FM on ebay. Got it iPod ready. Stanley is rockin'! 1 Quote Link to comment
Seeker > 620 KC Posted May 5, 2014 Report Share Posted May 5, 2014 Colourbox, Who did your ipod conversion on your radio? Do you remember what it cost? Quote Link to comment
Cleopatra Jones Posted May 5, 2014 Report Share Posted May 5, 2014 Yo Seeker! One of the kids at my mechanic's shop did it. He's not there anymore. So far I haven't paid anything for the work I had done there. The head gasket, shocks, brakes, install and wiring of the clock I had fixed, etc. Probably because I also build and maintain two of his web sites :) I had found a write up online once on how to do it. I'll see if I can find it for ya. Quote Link to comment
Wheezie Posted May 5, 2014 Report Share Posted May 5, 2014 It might be a cool thing if there was a place in the forum for a junk yard report... or not... it's great that there is this web site. Friday 7/20 I was at Porltand Wrecking on Columbia Blvd. There were two 620s that were pretty picked over but still had some goodies here and there. There was a '76 with a pretty intact L18 an OK tailgate and two nice doors that somebody stripped the window regulators out of, too bad. There were four 720s but I'm not really interested in them so I didn't look past the engines/trannys. Nothing to write home about. Usually, there is a 521 and some Z cars or a 1200, but there were no nissan cars in the whole place this time. I'm looking for Hardbodies to get front suspension parts to put discs on my 620. I have never seen a single one in the last three years or so. I hope to hit a couple more yards to day. There is a 620 disc coversion in the classifides on this site. 1 Quote Link to comment
Will Posted May 6, 2014 Report Share Posted May 6, 2014 ^^^^ FAIL Dude, be nice - Figbuck has been waiting for that disc brake conversion for SEVEN YEARS. His drums are almost totally worn out. 3 Quote Link to comment
ggzilla Posted May 6, 2014 Author Report Share Posted May 6, 2014 Friday 7/20 I was at Porltand Wrecking on Columbia Blvd. There were two 620s that were pretty picked over but still had some goodies here and there. There was a '76 with a pretty intact L18 an OK tailgate and two nice doors that somebody stripped the window regulators out of, too bad. There were four 720s but I'm not really interested in them so I didn't look past the engines/trannys. Nothing to write home about. Usually, there is a 521 and some Z cars or a 1200, but there were no nissan cars in the whole place this time. I stopped in there to get a seat for my Datsun. There was a stock 1200 seat in an old school bus but they wanted too much for it so I got a better one at John's Import Auto Wrecking. In June 1984. All the cars were stacked two high on racks over gravel, with clean concrete roadways in between. Quote Link to comment
MicroMachinery Posted May 6, 2014 Report Share Posted May 6, 2014 It might be a cool thing if there was a place in the forum for a junk yard report... or not... it's great that there is this web site. Friday 7/20 I was at Porltand Wrecking on Columbia Blvd. There were two 620s that were pretty picked over but still had some goodies here and there. There was a '76 with a pretty intact L18 an OK tailgate and two nice doors that somebody stripped the window regulators out of, too bad. There were four 720s but I'm not really interested in them so I didn't look past the engines/trannys. Nothing to write home about. Usually, there is a 521 and some Z cars or a 1200, but there were no nissan cars in the whole place this time. I'm looking for Hardbodies to get front suspension parts to put discs on my 620. I have never seen a single one in the last three years or so. I hope to hit a couple more yards to day. Dude, Figbuck(whoever you are.. must be some troll noob), I just spent the day driving up there and nothing you said was up there! Beware of this guy, he led me on a wild goose chase for parts that cost me my afternoon and a tank of gas! :sneaky: 1 Quote Link to comment
ggzilla Posted May 6, 2014 Author Report Share Posted May 6, 2014 You drive up there in 2007 and are just now complaining? 2 Quote Link to comment
Cleopatra Jones Posted May 6, 2014 Report Share Posted May 6, 2014 Someone wasn't paying attention to the date of the post. Quote Link to comment
TENDRIL Posted May 9, 2014 Report Share Posted May 9, 2014 stockton PNP i was told the front window is cracked :crying: 1 Quote Link to comment
Rosendori Posted May 20, 2014 Report Share Posted May 20, 2014 PASCO WA at a junkyard called TOMMYS STEEL AND SALVAGE there are 4 datsun 620's bodies look good, 3 have complete motors it looks, and there are 2 older datsun pickups but they arent in the best shape, years are 73,76,77,79 and the others are an 88 and a 71 I think......they have pleanty of parts phones number is +1 509-547-1221 Quote Link to comment
SilviaMaxxed Posted May 22, 2014 Report Share Posted May 22, 2014 if anyone is in Fairfield, CA and going to pick and pull i would really appreciate if you could check the 200sx that is there for me. Here's the info: "Nissan 200SX 85 Row: 0013 Date: 04/22/2014" looking for the model that has the ca20 because i need the h190 differential, thanks in advance. EDIT: okay i got some info on it here http://row52.com/Vehicle/Index/JN1PS24S7FW035188 but not sure if its the differential i need? Quote Link to comment
king bee66 Posted May 23, 2014 Report Share Posted May 23, 2014 That model has an irs Quote Link to comment
SilviaMaxxed Posted May 24, 2014 Report Share Posted May 24, 2014 That model has an irs okay thanks! saved me from a 2 hour drive :angel: Quote Link to comment
TheShagginWagon Posted May 27, 2014 Report Share Posted May 27, 2014 280 zx in San Jose south P&P from a couple days ago Everything intact and clean.... Except the struts and 5 speed I pulled 1 Quote Link to comment
DREWSDIME Posted May 30, 2014 Report Share Posted May 30, 2014 did you grab the san jose paper license plate insert??? Quote Link to comment
67_1600 Posted June 1, 2014 Report Share Posted June 1, 2014 '80 (I think) 210/B310 at NW Auto Recylcers in Lake Stevens set in the past few days: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.