konig209 Posted February 29, 2020 Report Share Posted February 29, 2020 So a friend of my 3d prints stuff. And he is pretty damn good. Soon these will be availible for everyone. New tail light buckets also soon to come are red brake light covers and clear reverse covers. The only thing you will be needing is your old tail light frames and ruber to seal. Here is the first stage bucket next to an oem. Thoughts are in the air about changing the socket style. FB_IMG_1582956237677 by Carlos Ortiz, on Flickr 4 1 Quote Link to comment
dat521gatherer Posted February 29, 2020 Report Share Posted February 29, 2020 (edited) Genius. I'll be needing original style sockets. Are these going to be one piece or two or three? Edited February 29, 2020 by dat521gatherer 2 Quote Link to comment
datsunrides Posted February 29, 2020 Report Share Posted February 29, 2020 That is pretty badass. Definitely a needed part for the 521’s. Hopefully the price is reasonable. 2 Quote Link to comment
mainer311 Posted February 29, 2020 Report Share Posted February 29, 2020 3D prints are porous. Are these just templates for actual molded plastic, or is he selling the actual 3D prints? What material are they printed in? They’ll have water in them in no time. 2 Quote Link to comment
BrothersGarage Posted February 29, 2020 Report Share Posted February 29, 2020 1 hour ago, mainer311 said: 3D prints are porous. Are these just templates for actual molded plastic, or is he selling the actual 3D prints? What material are they printed in? They’ll have water in them in no time. I've been following on the 520/521 facebook group - he is using an expensive lazer to take 3d scans of parts that konig209 sent him, and then is 3d printing them. I also sent Jake, the same guy doing the 3d printing stuff, a 521 heater control lever to remake and the left and right dash vents for 521s, and ther eare some other things that he is working on as well. 2 Quote Link to comment
mainer311 Posted February 29, 2020 Report Share Posted February 29, 2020 The problem is that 3D prints aren’t very structural. You can make them be, but in raw form they break apart. We’ve tried printing vacuum fixtures with them and even with acetone, we can’t get them to hold any pressure. 3 Quote Link to comment
mrbigtanker Posted March 1, 2020 Report Share Posted March 1, 2020 On 2/29/2020 at 11:08 AM, mainer311 said: The problem is that 3D prints aren’t very structural. You can make them be, but in raw form they break apart. We’ve tried printing vacuum fixtures with them and even with acetone, we can’t get them to hold any pressure. Other problem I see hear is the chrome reflecters in the light housing themselves. A+ for effort, and people need them that's for sure. Glad mine are brand new. 2 Quote Link to comment
thisismatt Posted March 1, 2020 Report Share Posted March 1, 2020 It's still my opinion that if you're going through all the work, then designing new housings would be the way to go, with new bulb holders using something more modern and accessible, or LEDs on PCBs. Make them mount the same as original & produce high quality original lenses. Like a modern engine swap for your tail lights. 3 Quote Link to comment
gene knight Posted March 4, 2020 Report Share Posted March 4, 2020 they look good i think LED lights is the way to go with these, need price Quote Link to comment
konig209 Posted March 5, 2020 Author Report Share Posted March 5, 2020 Look guys this is a preview. Its not set in stone what material theyre going to made of. But theyre going to be made of a different compound i think. Im not making them someone else is. I just supplied the parts. 3 Quote Link to comment
Draker Posted March 5, 2020 Report Share Posted March 5, 2020 It's a great start. There are a lot of other filament types available. I agree with modifying them for a different bulb, or offer two types. I don't have a 521, so I'm just a spectator here. 2 Quote Link to comment
gene knight Posted March 25, 2020 Report Share Posted March 25, 2020 whats the status on housings? Quote Link to comment
BrothersGarage Posted March 26, 2020 Report Share Posted March 26, 2020 Jake just finished up with the 521 heater vents / 510 steering column pieces so I wouldn't think they would be too far behind. If you message him on the 521 facebook group I bet he could give you a better idea. 2 Quote Link to comment
konig209 Posted February 14, 2022 Author Report Share Posted February 14, 2022 So here is the contact info on this. https://instagram.com/jakes_makes?utm_medium=copy_link His ebay https://www.ebay.com/usr/jakanderso97 Quote Link to comment
d.p Posted February 14, 2022 Report Share Posted February 14, 2022 31 minutes ago, konig209 said: So here is the contact info on this. https://instagram.com/jakes_makes?utm_medium=copy_link His ebay https://www.ebay.com/usr/jakanderso97 1 Quote Link to comment
Stoffregen Motorsports Posted February 15, 2022 Report Share Posted February 15, 2022 Fucking BMW owners... 2 1 Quote Link to comment
d.p Posted February 15, 2022 Report Share Posted February 15, 2022 1 hour ago, Stoffregen Motorsports said: Fucking BMW owners... 1 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.