sanitys Posted February 13, 2010 Author Report Share Posted February 13, 2010 Why not have the inlet moved to the other side of the radiator? Ive been told that since the rad is a single pass that it will not cool right if I get the upper one swapped over to the other side...in anycase i just ordered some silicone 90 degree bends, and ill grab some pipe from the hardware store and Ill do it that way for now. for anyone that cares, the fiero rad is best suited for sr20's or L-series due to the inlet/outlet config. Quote Link to comment
sanitys Posted February 15, 2010 Author Report Share Posted February 15, 2010 been a pretty productive weekend. -mount fan and did the fan wiring -changed oil -hooked up speedo -made the intake pipe -did the maf/air intake temp wiring -modified the d21 throttle cable to work. (probably could have made it shorter) -made throttle cable bracket I still have to make another hole into the cab for the wires, finish taping up the wires and install the grommets. Then it will look alot better in that area. Quote Link to comment
bonvo Posted February 16, 2010 Report Share Posted February 16, 2010 hmmm seems to me you have alot of space on that radiator thought about running 2 fans? probibly not needed but i like to build things so there overkill and know it wont fail :P Quote Link to comment
sanitys Posted February 17, 2010 Author Report Share Posted February 17, 2010 hmmm seems to me you have alot of space on that radiator thought about running 2 fans? probibly not needed but i like to build things so there overkill and know it wont fail :P yes I have thought about running two fan. I will see how this setup works. The fan pushes 2500cfm so i should be good, but we will see how it does sitting in traffic. I could also make a shroud for it as well and see if that helps any overheating issues. Time will tell. Looks like i might be running this weekend :D Quote Link to comment
]2eDeYe Posted February 18, 2010 Report Share Posted February 18, 2010 Way to get that spaghetti cleaned up :cool: Quote Link to comment
lil89ram50 Posted February 19, 2010 Report Share Posted February 19, 2010 not tryin to rag on ya or anything man, but is that a wood block for a motor mount? acting as like a spacer?? :unsure: Quote Link to comment
sanitys Posted February 19, 2010 Author Report Share Posted February 19, 2010 not tryin to rag on ya or anything man, but is that a wood block for a motor mount? acting as like a spacer?? :unsure: lol, after looking at it I can see how you would think that. No its a 1 inch piece of solid steel. Ask beebani, he sent it to me, I also have 1/2 pieces encase i needed it alittle lower. He used a 240 pan for the brackets he made. to get them to work with the truck pan I had to use those spacers. on a side note, I was in the middle of a 3 car pile-up this morning on my way to work so the ford is at the body shop (hopefully getting totalled) and I have a rental car. Gotta get the datsun done asap now Quote Link to comment
sanitys Posted February 21, 2010 Author Report Share Posted February 21, 2010 almost ready to start. waiting on a few things in the mail. Need to get another grommet and finish taping up the wires. the coil and horn was just temp mounting. Waiting for a fuel rail with an fittings to come in the mail and my aeromotive FPR Quote Link to comment
sanitys Posted February 28, 2010 Author Report Share Posted February 28, 2010 i got the SI sub in the mail. I also got my fuel rail, fpr, and some more an-fittings in the mail. The new fuel system is almost done. I would have gotten more done today but we had that whole tsunami warning today, and they closed the road, so i had to wait to get back home. I will take some pictures of the new fuel system installed tomarrow after i hit up the junk yard for some parts. I mentioned I got into an accident in my ford, here what it looks like now, the body shop is waiting for parts. I had to stop there to grab a loaner car. oh, and a crushed datsun 720 king cab next door to the body shop. new old sub parts ford crushed datsun Quote Link to comment
Guest kamakazi620 Posted February 28, 2010 Report Share Posted February 28, 2010 Check out that white 85-86 720 with the old school(80-82) datto tailgate!!! Quote Link to comment
alohabowles96795 Posted May 11, 2010 Report Share Posted May 11, 2010 i got the SI sub in the mail. I also got my fuel rail, fpr, and some more an-fittings in the mail. The new fuel system is almost done. I would have gotten more done today but we had that whole tsunami warning today, and they closed the road, so i had to wait to get back home. I will take some pictures of the new fuel system installed tomarrow after i hit up the junk yard for some parts. I mentioned I got into an accident in my ford, here what it looks like now, the body shop is waiting for parts. I had to stop there to grab a loaner car. oh, and a crushed datsun 720 king cab next door to the body shop. new old sub parts ford crushed datsun Quote Link to comment
alohabowles96795 Posted May 11, 2010 Report Share Posted May 11, 2010 Yo, Sanitys right on solid get one local boi here on this site...You can help with get'n my 620 going tight you seem too know what your doing..I'm in Waimanalo..Bumbai we talk story maybe get da trucks out for ride li dat..Shoots then bra aloha... Quote Link to comment
alohabowles96795 Posted May 11, 2010 Report Share Posted May 11, 2010 What ,Brah since you seem too be one car guy you got all da 411 on em An can use some help working mines up as well...My name is Chris live Nalo right behind Bobbys store right by da beach.. So what get some boiz who cruise da trucks ??? Like da honda and 4X4 hui's??? If so leeme know da scoops...Mahalos cuzz. A hui hou... Quote Link to comment
alohabowles96795 Posted May 11, 2010 Report Share Posted May 11, 2010 Oh yea so know anything about bodywork li dat??? If so same story could really use some help I'll do da work if can just show a bruddah how..Mahalos.. Quote Link to comment
motavated Posted June 22, 2010 Report Share Posted June 22, 2010 bump! Any new updates? Quote Link to comment
sanitys Posted September 16, 2010 Author Report Share Posted September 16, 2010 I apologize for lack of updates but I picked up a stand alone aem ecu, 50lb msd injectors, jgy fuel rail, 350z spec clutch and pressure plate, afco scirocco radiator, ls2 coils and some other things. I plan on taking some pictures tomorrow, there are about 4 forums that need updates w/ pictures. I still haven't installed the stereo integrity sub... I moved from Hawaii, back in Michigan till next week, then I'm moving to Maryland. I am now officially a dad as well...I have been pretty busy... Quote Link to comment
alleycat Posted September 17, 2010 Report Share Posted September 17, 2010 congrats on the dad part Quote Link to comment
sanitys Posted September 18, 2010 Author Report Share Posted September 18, 2010 Heres the AFCO rad being installed and the ls2/truck coils and harness all done again. Quote Link to comment
INDY510 Posted September 18, 2010 Report Share Posted September 18, 2010 That fuel rail is sexy..... Where did you get it??? ........... where are those fittings and hose from??? Quote Link to comment
sanitys Posted September 18, 2010 Author Report Share Posted September 18, 2010 That fuel rail is sexy..... Where did you get it??? ........... where are those fittings and hose from??? fuel rail is from (keep in mind that the fuel rail uses msd style injectors, it will not work with stock injectors): http://www.jgy.cc/ 50lb msd injectors are from: http://www.jgy.cc/ Fuel lines, an fittings, aeromotive fpr can be bought from summit, or this site: http://www.racepartsolutions.com/ Quote Link to comment
nis720 Posted September 18, 2010 Report Share Posted September 18, 2010 Those are some sexy parts you have there. Nice work on the progress. Quote Link to comment
sanitys Posted September 18, 2010 Author Report Share Posted September 18, 2010 Those are some sexy parts you have there. Nice work on the progress. thanks man. I get inspiration from your build threads here and over on ka-t.org. Maybe my engine and engine bay will be as clean as yours. Quote Link to comment
polini Posted September 18, 2010 Report Share Posted September 18, 2010 Truck is sick. I got a ? I have a 91 hardbody with a ka24e can I use that fuel rail and same injectors with my stock ecu and throttle body. Quote Link to comment
sanitys Posted September 18, 2010 Author Report Share Posted September 18, 2010 Truck is sick. I got a ? I have a 91 hardbody with a ka24e can I use that fuel rail and same injectors with my stock ecu and throttle body. You would need some way to tune the injectors otherwise you would be pig rich. stock injector size is 270cc. If you could find some msd style injectors that are close to the stock cc you might be able to use them. If you dont have the 240sx intake manifold on your motor I don't think it will work. Quote Link to comment
polini Posted September 18, 2010 Report Share Posted September 18, 2010 That sounds good I guess I better do more homework. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.