Phixius Posted August 11, 2016 Author Report Share Posted August 11, 2016 Anythings "savable" ... ill pass on this one tho... 1 Quote Link to comment
Phixius Posted August 11, 2016 Author Report Share Posted August 11, 2016 next is interior... I lied. next is exterior... bolted the front end together. and smashed out the fender dents a little. 5 Quote Link to comment
banzai510(hainz) Posted August 11, 2016 Report Share Posted August 11, 2016 IM digging this 610!!!!!!!!!! 1 Quote Link to comment
Phixius Posted August 12, 2016 Author Report Share Posted August 12, 2016 Ok. Interior... This is basically the whole car.... Scrub scrub scrub... repeat. .. 1 Quote Link to comment
Phixius Posted August 12, 2016 Author Report Share Posted August 12, 2016 Yeah, steel is pretty low right now. I was offered $120 for a complete 02 Silverado, missing only engine, trans, and wiring/swap stuff. I called a different yard the other day. 125... much better. Quote Link to comment
bananahamuck Posted August 12, 2016 Report Share Posted August 12, 2016 Might want some ZX stuff ,,, is there any interior at all,,, and what color?? What about the windshield ? Quote Link to comment
Phixius Posted August 13, 2016 Author Report Share Posted August 13, 2016 It's got lots a interior pieces left. Missing the wheelwell plastics. The windshield has two small rock chips about two inches from the top. 610. GoT the dash put back together for the most part. Need a new dashpad... And found my notes from the carb rebuild. L20b w58 head Jetting, Idle: 50/50 Main: 140/140 Air: 170/165 Basically the only jets I had left. 1 Quote Link to comment
Phixius Posted August 15, 2016 Author Report Share Posted August 15, 2016 Made it to LaBluelake... 2 Quote Link to comment
tdaaj Posted August 16, 2016 Report Share Posted August 16, 2016 Thats it? Thought maybe you had a real update. Quote Link to comment
bananahamuck Posted August 17, 2016 Report Share Posted August 17, 2016 The board clearly throws a monkey wrench in my plans to get those holder upper thing-a-ma-bobs for mine.... I will have ask scalpum if he could get windshield out without fucking it up.. Maybe that radio holder thing as mine was destroyed by a overzealous radio installer years ago. It's got lots a interior pieces left. Missing the wheelwell plastics. The windshield has two small rock chips about two inches from the top.610. GoT the dash put back together for the most part. Need a new dashpad... Quote Link to comment
Phixius Posted September 7, 2016 Author Report Share Posted September 7, 2016 Put the wheels off the junk zx on, which are american racing 14x5.5 couldnt find the offset. along with the zx struts, brakes and 15/16 master. and added some creepy rape curtains... 3 Quote Link to comment
MapleNuts Posted September 7, 2016 Report Share Posted September 7, 2016 haha those curtains! are they privacy curtains for sleeping in the back? 1 Quote Link to comment
Lockleaf Posted September 7, 2016 Report Share Posted September 7, 2016 added some creepy rape curtains... For being creepy and suspected of rape :) 1 Quote Link to comment
tdaaj Posted September 9, 2016 Report Share Posted September 9, 2016 Nice camp wagon 1 Quote Link to comment
tdaaj Posted October 16, 2016 Report Share Posted October 16, 2016 Heard this thing was getting knotched? 2 Quote Link to comment
Phixius Posted October 16, 2016 Author Report Share Posted October 16, 2016 Well, today was planned c notch day. But mother nature. ......I mean dipshit weather casters that regurgitate computer models for a living and keep their jobs for telling lies to get eyeballs glued to the tv.... wait I'm venting... fucking storm of the decade.. a leaf fell off my apple tree, but no apple...Anyways. Yes I slept in lablue for 3 nights in longbeach WA For the rod run...Sign is wrong. Should read... world's longest drivable beach... 2 Quote Link to comment
Phixius Posted October 16, 2016 Author Report Share Posted October 16, 2016 Ok. A little lower . First we did 4 inch blocks and heated the floor under the rear seat and took a hammer to it after we cut out the center bump stop mount. and that was bang bang city. Along with driveline rub. Today whilst the non wind event happened. Made some angled blocks and flipped a leaf. 2 Quote Link to comment
Phixius Posted October 16, 2016 Author Report Share Posted October 16, 2016 First pic I have a 3500w gen set in the back. For incase. Second the gen set is removed. But the mods have been done. We decided against the notch today because of the "storm". Didn't want to be half way through plasma cutting or welding when power cuts out. Looked at his welder, said 7500w. Yeah at max but not gonna chance it...Next week maybe... pfa.. 2 Quote Link to comment
jrock4224 Posted October 17, 2016 Report Share Posted October 17, 2016 wind musta been blowing your camera around lol 2 Quote Link to comment
Phixius Posted October 19, 2016 Author Report Share Posted October 19, 2016 On the trip to long beach, filled the tank all the way. Got back on the road and started smelling gas. Then I got a call from the guys following me saying that I was dumping fuel. Turns out taking left hand turns the gas would start dumping on the road. So, I investigated... Didnt look right to me. So off to the junk yard cat infested wagon again. and found this... 2 Quote Link to comment
Phixius Posted November 26, 2016 Author Report Share Posted November 26, 2016 Got me a set of BMW ellipsoids... Lots of cutting of the buckets and brackets and shaving the mounting tabs of the bmw lights. Sorry for the shitty pics. Then some hammering of the headlight hole on the core support.. GoT em in. [/url] Then output comparison. Low beams. High beams. Not adjusted. The right headlightside hotspots is messed up. Someone put the bulb in the housing wrong and melted the housing. So now the bulds sits in at an angle killing the hot spot. I'm running a relay harness for the low beams and on for the high beams. [/url] And added a diode to keep the low beams on with the high beams. This is really important when going to HIDs. Because of the warm up time they have. Put in a HID kit. 35w 3000k The hotspots is still messed up on the right. Going to fix this soon. Got a replacement rear part for the light. 1 Quote Link to comment
Eagle_Adam Posted December 15, 2016 Report Share Posted December 15, 2016 Looks good!! 1 Quote Link to comment
tdaaj Posted January 20, 2017 Report Share Posted January 20, 2017 Any updates? 2 Quote Link to comment
Phixius Posted February 18, 2017 Author Report Share Posted February 18, 2017 Tonight I chopped off the bump stop mounts on the frame rail. Gained about 1 inchish of travel... 1 Quote Link to comment
Phixius Posted April 21, 2017 Author Report Share Posted April 21, 2017 Put the weber air cleaner from my truck on. Along with a cover I had coated by Jrock. Told him dealers choice on the color. now it looks like im sponsored by PEAK. Also, working on getting the side trim put on. think im gonna keep just the stainless trim and not put on the steel pieces that go underneath. have the body color show. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.