Ricebiker Posted July 26, 2016 Report Share Posted July 26, 2016 Ground the roof. It was rusty. Grinding it heated it up and made it wavy so I had to bang out the oil can effect and then bondo. Almost got the whole body done now. The roof was the nastiest. 1 Quote Link to comment
Jersey Posted July 26, 2016 Report Share Posted July 26, 2016 I dropped off my driveshaft to get the u joints and carrier bearing replaced and have it balanced. 1 Quote Link to comment
TIGrant Posted July 29, 2016 Report Share Posted July 29, 2016 Finished up the fuel tank finally. Went with red because for some reason I had red paint on hand. I don't remember buying it but it looks okay. It's not perfect but now my fuel tank is the best looking thing about my 620. Ha! 3 Quote Link to comment
mcordero8 Posted July 29, 2016 Author Report Share Posted July 29, 2016 I dig the bbq pit red. 2 Quote Link to comment
gumbyz13 Posted July 30, 2016 Report Share Posted July 30, 2016 Finally gave her some new shoes... 1 Quote Link to comment
Cosmonaut Posted August 3, 2016 Report Share Posted August 3, 2016 Pushed it back into my driveway. It will not leave without an immediate return trip, ever again. Bought her all new drums to let her know I appreciate her coming home. 1 Quote Link to comment
red13 Posted August 7, 2016 Report Share Posted August 7, 2016 coil upgrade mod tested ] 1 Quote Link to comment
bigboy620 Posted August 8, 2016 Report Share Posted August 8, 2016 Put my wheels on after hella long 2 Quote Link to comment
kneesamo Posted August 20, 2016 Report Share Posted August 20, 2016 Fixing the broken thing. by Benjamin Scott Cook, on Flickr Sheared some teeth off reverse, which conveniently found their way into a bearing. I'm assuming. So yeah, pulled the 5-speed, replaced the clutch and installed a 4-speed 2 Quote Link to comment
Eccles Posted August 22, 2016 Report Share Posted August 22, 2016 getting ready for weber install mgb inlet and header, couple mods but will go in 2 Quote Link to comment
mhub91 Posted August 23, 2016 Report Share Posted August 23, 2016 Wtf... you have a J13?? Quote Link to comment
Anonymous Waffle Posted August 23, 2016 Report Share Posted August 23, 2016 Wtf... you have a J13?? I think Australian and Philippine cars had both(?) j and l motors... But I didnt know Australia did either. Quote Link to comment
Eccles Posted August 23, 2016 Report Share Posted August 23, 2016 Wtf... you have a J13?? They ran j15 and j16 here Mines a j16 and my daughters I'd j15 Rhd so mg stuff works with a few mods I'm putting this in then doing 2 inch exhaust Trying to keep it looking stock under the hood Planning diff Centre swap too 1 Quote Link to comment
mhub91 Posted August 23, 2016 Report Share Posted August 23, 2016 Man that's awesome. Lucky to be rhd with J series. My '65 320 is the E1. I'd love it if I had the option of MGB stuff, but no luck for me. I read your thread on here. It seems.to me the J16 valve cover reminds me of an A series for some reason Quote Link to comment
red13 Posted October 16, 2016 Report Share Posted October 16, 2016 temp put it together to move it 3 Quote Link to comment
2wheel-lee Posted October 17, 2016 Report Share Posted October 17, 2016 That looks like an old friend's 620 that he often kept out near 29 Palms. I remember years ago also changing a clutch in the dirt. Joy... Quote Link to comment
red13 Posted October 17, 2016 Report Share Posted October 17, 2016 That looks like an old friend's 620 that he often kept out near 29 Palms. I remember years ago also changing a clutch in the dirt. Joy...Thata not the original bed, as well it was lowered when i originally bought it. Done lot of work and atill have more ti do. 1 Quote Link to comment
red13 Posted November 21, 2016 Report Share Posted November 21, 2016 got this for the truck debating still on using 1 Quote Link to comment
qwik510 Posted November 21, 2016 Report Share Posted November 21, 2016 Dragged a new one home today. 1976 4X4 620 3 Quote Link to comment
bigboy620 Posted November 22, 2016 Report Share Posted November 22, 2016 Nos grill. Quote Link to comment
sebpv Posted March 13, 2017 Report Share Posted March 13, 2017 yupper. I discovered today that the front and rear mounts are different. Mine are busted so im looking at a way of stamping new ones using concrete forms Quote Link to comment
Lockleaf Posted March 13, 2017 Report Share Posted March 13, 2017 Very cool. I am now interested in your stamping method. You should post up your progress etc on here somewheres. Nice model by the way. 1 Quote Link to comment
FrankRizzo Posted March 13, 2017 Report Share Posted March 13, 2017 Whatcha going to use for the rubber? I cant find any of the rubber body isolators. . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.