Bory Posted December 19, 2016 Author Report Share Posted December 19, 2016 So I had to drill the bed for the fuel fill hose, so I 1st dropped a plumb bob from the ceiling to the center of the fill tube coming off the tank, then I set the bed into position and again dropped the plumb bob, and hole sawed the mark. 4 Quote Link to comment
Bory Posted December 19, 2016 Author Report Share Posted December 19, 2016 And as you can see it's pretty close to center 5 Quote Link to comment
datsunfreak Posted December 20, 2016 Report Share Posted December 20, 2016 So I had to drill the bed for the fuel fill hose, so I 1st dropped a plumb bob from the ceiling to the center of the fill tube coming off the tank, then I set the bed into position and again dropped the plumb bob, and hole sawed the mark. That's pretty damn crafty. :thumbup: 1 Quote Link to comment
mklotz70 Posted December 20, 2016 Report Share Posted December 20, 2016 F'in' brilliant!!! :) 1 Quote Link to comment
Bory Posted December 20, 2016 Author Report Share Posted December 20, 2016 Thanks boys! Here's the between the the bed and tank shot. I have a raised area I had to do above the axle of about 4", that's where the condenser is gonna sit, on the shot of the birds eye view on the tank fill, that small area will have a wood floor raised to flush out the area of the condenser tray. I got this sweet polished fill cap, that will flush mount in the finished wood. 4 Quote Link to comment
Charlie69 Posted December 21, 2016 Report Share Posted December 21, 2016 Looking Great Bory keep it up. Guess you will have to keep the truck as Santa dose not deliver projects! LOL Quote Link to comment
Bory Posted December 21, 2016 Author Report Share Posted December 21, 2016 Ya it's like a big ikea build- with no international instructions- haha. 2 Quote Link to comment
Bory Posted December 25, 2016 Author Report Share Posted December 25, 2016 So I had a buddy break this tailgate out at his sheet metal shop, out of 16 gauge, 2 Quote Link to comment
Bory Posted December 25, 2016 Author Report Share Posted December 25, 2016 What do you guys think, traditional, top pic or here, more of a custom look? 2 Quote Link to comment
mrbigtanker Posted December 25, 2016 Report Share Posted December 25, 2016 I like the top better, and can't he hang the skin lower to hide the hinges. 1 Quote Link to comment
thisismatt Posted December 25, 2016 Report Share Posted December 25, 2016 He would have to notch the bed floor for the gate to swing in/under the hinge barrels if the gate goes down past the barrels. 1 Quote Link to comment
mrbigtanker Posted December 25, 2016 Report Share Posted December 25, 2016 He would have to notch the bed floor for the gate to swing in/under the hinge barrels if the gate goes down past the barrels. Right get on it. 2 Quote Link to comment
Charlie69 Posted December 25, 2016 Report Share Posted December 25, 2016 Merry Christmas all! 1 Quote Link to comment
Bory Posted December 26, 2016 Author Report Share Posted December 26, 2016 Same to you C6! Excited for what God has for all of us in the next year! God bless! 5 Quote Link to comment
Bory Posted December 31, 2016 Author Report Share Posted December 31, 2016 Ran the front rt hard brake line along the X member to keep the firewall clean 3 Quote Link to comment
Bory Posted December 31, 2016 Author Report Share Posted December 31, 2016 Used the axle hump tray to mount some condensers and Trans coolers 4 Quote Link to comment
Bory Posted December 31, 2016 Author Report Share Posted December 31, 2016 Trans lines 3 Quote Link to comment
Bory Posted December 31, 2016 Author Report Share Posted December 31, 2016 Headers and other bits 5 Quote Link to comment
Charlie69 Posted December 31, 2016 Report Share Posted December 31, 2016 The time you have spent on the details shows! What a well thought out project. I can not wait to see what you do in the wiring department. 1 Quote Link to comment
Skib Posted January 2, 2017 Report Share Posted January 2, 2017 yup... I still love this thread :rofl: stunning work Bory 1 Quote Link to comment
Bory Posted January 3, 2017 Author Report Share Posted January 3, 2017 Thanks so much guys! Gonna hit it hard here pretty quick, waiting on some parts from polishing and P-coating! 1 Quote Link to comment
Bory Posted January 6, 2017 Author Report Share Posted January 6, 2017 Finally got my cooling lines back from the polishers, 3 Quote Link to comment
Bory Posted January 6, 2017 Author Report Share Posted January 6, 2017 Clocking of the hose clamps still to be done, the hose is hose man radiator hose 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.