Skib Posted June 24, 2012 Author Report Share Posted June 24, 2012 still going bamboo, since Iv already got the paint. 1 Quote Link to comment
Draynor Posted June 24, 2012 Report Share Posted June 24, 2012 still going bamboo, since Iv already got the paint. shweet B) Quote Link to comment
Skib Posted June 25, 2012 Author Report Share Posted June 25, 2012 guide coated the car and started final sanding and fixing a few little spots mainly the mirrors holes..... and the mirror holes and the mirror holes and the mirror holes...... put down some glass and then with a little bit of glaising putty and its good to go gettin necked Quote Link to comment
Skib Posted June 25, 2012 Author Report Share Posted June 25, 2012 and for mike Quote Link to comment
Zeusimo Posted June 25, 2012 Report Share Posted June 25, 2012 So Can You Remove The Tach? Or Would You Have To Get A Whole New Cluster??? That Dash Came Out Nice :) Quote Link to comment
Skib Posted June 25, 2012 Author Report Share Posted June 25, 2012 looks like you can remove it. Quote Link to comment
Abe Froman Posted June 25, 2012 Report Share Posted June 25, 2012 So Can You Remove The Tach? Or Would You Have To Get A Whole New Cluster??? You can add a tach to a cluster that did not come with one, I bought just a tach and installed it in my base sedan. Pretty simple, the hard part is finding a tach. Quote Link to comment
Z chopper Posted June 25, 2012 Report Share Posted June 25, 2012 skib those flares you got might look even better on the 710 than the 510 Quote Link to comment
datzenmike Posted June 25, 2012 Report Share Posted June 25, 2012 and for mike Thanks skib..... where does the yellow wire go at the top of the picture??? Mine has a small metal can with a red and yellow/red wire coming from it and those are the problem. Quote Link to comment
]2eDeYe Posted June 25, 2012 Report Share Posted June 25, 2012 I"m excited to see color on this. :cool: 1 Quote Link to comment
Z chopper Posted June 25, 2012 Report Share Posted June 25, 2012 2eDeYe' timestamp='1340633496' post='708048']I"m excited to see color on this. :cool: with chrome trim (bumpers, grille etc..) Quote Link to comment
Skib Posted June 25, 2012 Author Report Share Posted June 25, 2012 skib those flares you got might look even better on the 710 than the 510 I only flared the 510 because it was already halfway cut for them and the other half was so fucked. plus part of the reason I took the 710 was its a ton less work until completion. and flares are more work. Quote Link to comment
The Dat-side Posted June 25, 2012 Report Share Posted June 25, 2012 The sides of the 710 flow so nicely, flares would ruin it IMO. 2 Quote Link to comment
the510keeper Posted June 26, 2012 Report Share Posted June 26, 2012 I thought the ZG's would look good on the 710 if it was dumpped with really wide rims Quote Link to comment
Will Posted June 26, 2012 Report Share Posted June 26, 2012 I'm pretty sure that the red wire on he tach hooks up to a red wire that is coming out of the top of the gauge cluster. Do the connectors match up? Thanks skib..... where does the yellow wire go at the top of the picture??? Mine has a small metal can with a red and yellow/red wire coming from it and those are the problem. Quote Link to comment
Z chopper Posted June 26, 2012 Report Share Posted June 26, 2012 I thought the ZG's would look good on the 710 if it was dumpped with really wide rims great minds.... is all I have to say Quote Link to comment
Z chopper Posted June 26, 2012 Report Share Posted June 26, 2012 hmmm no test shot of 710 coupe with meshies yet Quote Link to comment
TENDRIL Posted June 26, 2012 Report Share Posted June 26, 2012 ZGs and meshies flirt pic? Quote Link to comment
Skib Posted June 27, 2012 Author Report Share Posted June 27, 2012 no ZGs one, because its a clean body. two, the idea of picking up the 710 was to have less work. lol flares are a lot more work. I havent put the meshies on because its all getting painted pretty soon so Ill leave the rollers on for now. dont want to get any accidental over spray on my actual wheels :P Quote Link to comment
2JZ260z Posted June 27, 2012 Report Share Posted June 27, 2012 Using my meshies? :3 Tank and polish those bitches! Quote Link to comment
The Dat-side Posted June 27, 2012 Report Share Posted June 27, 2012 Can we just start calling Appliance mesh type wheels "Skibs"? I think some SSR MKIIs are in order. When you move back you can start drinking homebrew, it'll help you save up. Quote Link to comment
Z chopper Posted June 27, 2012 Report Share Posted June 27, 2012 But the ZG flares would still look great on the 710 coupe Quote Link to comment
Skib Posted June 27, 2012 Author Report Share Posted June 27, 2012 Using my meshies? :3 Tank and polish those bitches! nope lulz those are FS Can we just start calling Appliance mesh type wheels "Skibs"? I think some SSR MKIIs are in order. When you move back you can start drinking homebrew, it'll help you save up. that or some classic flat black wats. if I could afford it Id have a set for every day of the week :rofl: But the ZG flares would still look great on the 710 coupe I agree, but I dont want to do the work lol esp not when its this close to paint Quote Link to comment
jalen Posted June 27, 2012 Report Share Posted June 27, 2012 Your thread is starting to end up like mine. a lot of talk not enough oics. Quote Link to comment
Skib Posted June 27, 2012 Author Report Share Posted June 27, 2012 I could post pics of sanded door jams but thats not very exciting. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.