Rustina 510 Posted February 14, 2011 Author Report Share Posted February 14, 2011 I'll Post Pics tomorrow Quote Link to comment
Rustina 510 Posted February 14, 2011 Author Report Share Posted February 14, 2011 I'll Post Pics tomorrow Quote Link to comment
Rustina 510 Posted February 14, 2011 Author Report Share Posted February 14, 2011 So this is the passenger rear coilover kit. This is with stock 13" rims, not even as low as it can go. Super dropped! And I started getting the new fenders ready, they have more damage than I was expecting but I'll fix em. I'll be getting them ready for mounting during the week. Thx for reading guys and gals. Quote Link to comment
The Dat-side Posted February 14, 2011 Report Share Posted February 14, 2011 Al right. Just talked to Bob, gave him your digits. Looks like he didn't do the flares. Those were done by a guy named Jerry Schnider. Don't know him, so good luck. Sorry. Quote Link to comment
DISLEXICDIME Posted February 14, 2011 Report Share Posted February 14, 2011 I like the good year sticker Quote Link to comment
Skib Posted February 14, 2011 Report Share Posted February 14, 2011 if you need a hand repairing some of the fiberglass just let me know Quote Link to comment
Rustina 510 Posted February 14, 2011 Author Report Share Posted February 14, 2011 Thx guys, yeah skib we will get together soon Quote Link to comment
Rustina 510 Posted February 15, 2011 Author Report Share Posted February 15, 2011 Al right. Just talked to Bob, gave him your digits. Looks like he didn't do the flares. Those were done by a guy named Jerry Schnider. Don't know him, so good luck. Sorry. No I don't know him. Quote Link to comment
Rustina 510 Posted February 17, 2011 Author Report Share Posted February 17, 2011 Getting my m3 8115 body panel adhesive this weekend and getting ready for days upon days of bonding and sanding and glazing and more sanding. Did I mention I'll be doing a crapton of sanding Quote Link to comment
Rustina 510 Posted February 27, 2011 Author Report Share Posted February 27, 2011 Cut out the passenger rear fender and took a lot of measurements also started mocking up the fenders Here is your pics. Passenger side Quote Link to comment
Rustina 510 Posted February 27, 2011 Author Report Share Posted February 27, 2011 And just for smiles, I put the front grill trim on, to see how it looks and lines up Quote Link to comment
Rustina 510 Posted February 27, 2011 Author Report Share Posted February 27, 2011 The drivers side still needs some adjustmens but the body work was really fun to do today. Quote Link to comment
Rustina 510 Posted February 27, 2011 Author Report Share Posted February 27, 2011 Quote Link to comment
Bob3 Posted February 27, 2011 Report Share Posted February 27, 2011 ^ ^ ^ I was friends with Danny Collins. He was a good man! :D Quote Link to comment
Rustina 510 Posted February 27, 2011 Author Report Share Posted February 27, 2011 I never knew him, if you want i can steam peel the sticker and keep it intact and mail it to you. It sounds like he is not with us anymore, if that's the case I'm sorry to hear another racer won't be smiling on the track anymore 1 Quote Link to comment
Rustina 510 Posted February 28, 2011 Author Report Share Posted February 28, 2011 Thx ratsun!! I pit my l16 auto tranny in the for sale section for fee if someone can come pull it out, wasn't expecting a response bit a cool ratsun member said he will be here this Friday to pull the motor and tranny and he is taking the stuff I don't need. So a major part of the project is getting done this weekend, finally getting the engine bay cleared out, now I can clean up the bay and paint it asap. Thx ratsun! And thx shamuswagon, I'll see you this weekend Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Well today was fun, we pulled the motor and tranny out of the car, thx shamus for bringing the picker. Was hoping to go get my gas tank from kamikaze but the wife got called into work so I didn't have the car. The car that actually runs. Kept some stuff like the oil Pan and the plates that go between the motor and tranny for my l20b, shamus took the l16 and auto tranny for free as part of my free tranny post in the for sale section. Thx dude, it was really fun Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Now it's time for Getting the engine bay totally stripped and cleaned and bondo and painted. Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Going to go get my bumpers today, and just letting the passenger side rear fender cure after using the 8115 adhesive, once it is cured I'll remove the holding screws, and I'm going to start pulling all the parts from the engine bay too Quote Link to comment
skunk Posted March 5, 2011 Report Share Posted March 5, 2011 looking great, but are the plates that go between the motor and tranny different between auto/manual l16/l20? Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Going to go get my bumpers today, and just letting the passenger side rear fender cure after using the 8115 adhesive, once it is cured I'll remove the holding screws, and I'm going to start pulling all the parts from the engine bay too Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 looking great, but are the plates that go between the motor and tranny different between auto/manual l16/l20? It all looks exactly the same. Quote Link to comment
Rustina 510 Posted March 5, 2011 Author Report Share Posted March 5, 2011 Thx skunk Quote Link to comment
the510keeper Posted March 6, 2011 Report Share Posted March 6, 2011 Cool beans we will get to see another box flared 510 at canby, cant wait. Quote Link to comment
Guest kamakazi620 Posted March 6, 2011 Report Share Posted March 6, 2011 You still need that gas tank???? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.