Radim

good job

You probably rotated the drive shaft 180 degrees when you disconnected it to do the bearing replacement. Try unbolting the U joint and flipping it 160 degrees. If that doesn't work, go to a reputable drive shaft shop and rebalance your driveshaft.

Nah, I fixed it, the isolator I had made was too solid, so it took a bit of layers out and it solved both issues.

'81 2wd 720 one-piece fit on mine. Only had to move the drive train an inch because I linked and lowered it.

fuck yeah... I hope you're gonna had this to your build. I'm very interested :)

Same here! I am curious if there is a noticeable difference.

Yup, Will report back!

Just thought I'd let ya'll know in case you're going through the hassle of having to get new brake lines made or making your own with AN adapters.

I already had Stainless lines from the Pathfinder swap so I didn't want to make new ones, specially since these are like 2 months old.

Nope, 280ZX, This is a Datsun website after all. :P

banjo or the bolt that holds it to the block? YOiu can swap out the banjos for A/N fittings

The banjo bolt that holds it to the block, lol

I got the Part Number but they're NLA

or know of a S12 at a yard?

Bro lez BBQ tomorrow anyways and just wing it. HMU

Who cares if nobody comes. three datsuns is a caravan. lol

switch the red and black wire but dont cut the blue wire.

Should be something like Green/Red and Green/black at each rear light. Cut from solid red lens, leave connected on Amber lense. Disconnect second side of brake switch and zip tie wire up. Run new Brake wire from switch to the wire you cut going to bulb behind red lense.

If it is anything like a 510, there is more than just a wire swap. I helped out WICKEDJESTER (Nelson) on his wagon. Let me know via PM if you would like me to take a look at it.

oh and 3 trucks and a 280zx in the right one

went last week

oh tanker, you're so adorable.

where was that 280zx? and did it still have the MC?

you want to buy the red 521's old 15x8

Too small like you've heard many times Ray. :)

you got 4x4 ones?

lol i got those and lows, hater!!!!

to be fair... i did do a shit ton of other shit too ... but with just 4x4 and 4 inchers the truck was pretty low....

my garage is always open to ratsuners

I'd like to meet up with some fellow Ratsuners too. If there's going to be a meet,please post a location,time,date,etc.

I'm not too common with the area, but If ya'll want to get something going I'll be happy to help.

I'll be in Salem 27-30th!

I think i have the rack off of one.

Yay

DTP?

On my list of things also.....Rev...protection.

pics or it didn't happen.

get the hinges?

Unfortunately no hinges, Didn't even have a hood so I imagine someone grabbed them with the hood.

Pics are on my IG @pmgarage

81 280zx turbo's have it also any 280zx turbo automatic from 82-83.

what the rx7 isnt good enough to not cool your oil? you want a different oil cooler to never hook up?

Front - to be towed, or rear - to tow another vehicle?

Rear to tow a trailer. Hehe

george if you pulled the 720 diff it could be a 3.7 one like whats in mine....

Ring gears say 35/9

3.888888889

lol

Double checked the tag too. HF38

If you get in a pinch, grab one off an early Maxima...the L24 motor will have the same mounting.

had one for a 710, will that work?

i got one froma 710(adams old one) you could have if it works.

510 wagon, 610 wagon, 810, maxima, 200sx ... can get them from a lot more than just 720/D21 for the low ratios.

maxima LD28 had 3.34 apparantly. N/a 3.54...

the earlier 320 pickup had 5.13 and 4.8 ratios, probably nice match for a high revving race built L16.

well there are 3 720s at a yard here and a few d21s andall have sets in them if u wanna pay shipping i would go pull one

well there are 3 720s at a yard here and a few d21s andall have sets in them if u wanna pay shipping i would go pull one

I KNOW WHAT THE FUCK!

maybe you and Alian can rebound.lol

Heheheheewwwwwwww

Amy Winehouse decaying.

Amy Winehouse fermenting.

Amy Winehouse Overdosing

Not REALLY men, but I suppose that can be thrown in there

WHERE'D DID YOU GET THAT PIC OF ME ERICH?!

I went to San Francisco thinking nobody would see me.

I went the year after and it wasn't as cool.. probably because I wasn't running the booth and rockin' a Datsun :D

what if i wanted to hang out?

Then you can hang out with me Thursday and I can fly hungover and ass-leep.

Cool, I'll check. Thanks guys!

I've got a plotter aswell, but I need printed stickers. Ehhhh!

I haven't seen any posts from Jun lately, but last time he popped up he was advertising nice printed stuff. UV ink on good vinyl.