jrock4224 Posted January 9, 2013 Report Share Posted January 9, 2013 someone should snag the wiper switch if its the intermittent one!!!! phixius is stopping by to see if it has one.... i never even thought to look .. i was searching for springs and a leaf to leaf measurement on a d21 for a axle swap question he had... ojh and i picked up another set of mazda b2200 window track rubber... they work good in a 521, the bends are almost in the same place and its a little tight but they break in nice and no more window rattling thanks naner.... i figured i could zoom in for the stock number to figure outthe years... but just wanted to get it up o nhere....the truck is pretty f ing straight with no rust...Eagle..adam could swap parts onto this truck and have a decent truck .... tristin there's two 720's with complete naps engines in them ... i didn't ask the price cause i figured a full engine would be more than u wanted to invest... Quote Link to comment
Tristin Posted January 9, 2013 Report Share Posted January 9, 2013 I think PnP changes $300 for a long block. Way more than I want to spend... Quote Link to comment
jrock4224 Posted January 9, 2013 Report Share Posted January 9, 2013 i figured as much .....i will keep my eye out for the napz with a head robbed off it for u ... they ususally get in the 175 range Quote Link to comment
Tristin Posted January 9, 2013 Report Share Posted January 9, 2013 I think Im meeting up a member to snag a short block in the Portland area on Saturday. I havent heard back from him though to say if hes available or not. Quote Link to comment
bananahamuck Posted January 9, 2013 Report Share Posted January 9, 2013 It`s not a pick n pull it`s a independent,,, pick a part,,, but price is still almost $200. for fully dressed engine,,$150. if just block and head http://www.pickapartolympia.com/price-list/ Quote Link to comment
Tristin Posted January 9, 2013 Report Share Posted January 9, 2013 Thats not bad then as I just want a short block. I can do $110 (since I dont have a core). Quote Link to comment
ggzilla Posted January 9, 2013 Author Report Share Posted January 9, 2013 Pnp is $180 Quote Link to comment
jrock4224 Posted January 9, 2013 Report Share Posted January 9, 2013 I think Im parusin all the wrecking yards in portland for 4x4 720 springs for jrock till i find a set, then meeting up w/ a member to snag a short block in the Portland area on Saturday. I havent heard back from him though to say if hes available or not. thanks bro ...wink...lol Quote Link to comment
jrock4224 Posted January 9, 2013 Report Share Posted January 9, 2013 It`s not a pick n pull it`s a independent,,, pick a part,,, but price is still almost $200. for fully dressed engine,,$150. if just block and head http://www.pickapartolympia.com/price-list/ nice thanks naner.....preciate it ....solid info ...makes me wanna grab that l20 bottom in the 620 for a buck fitty...although homeboy behind the counter treats me pretty good...he likes bagged mini trux... and I'm like "Who don't?".....but hes been a solid help in the past... just gotta break down the homeboyness and he will help u.... Quote Link to comment
Tristin Posted January 9, 2013 Report Share Posted January 9, 2013 Haha since I work graveyard again, I can hit the yards in the middle of the week whenever I want. I just have to make the time to get over there. Quote Link to comment
jrock4224 Posted January 9, 2013 Report Share Posted January 9, 2013 its karma bro i had the chance at like 4 sets ......everytime im like no im gonna bag my shit.... but now im like i still want a low truck till i get the time, didn't plan on the mazda 4 link re dux..used my 3 link parts for the 521 on it.............shit i shoulda grabbed one of those sets...(kicking my own ass around the shop...) Quote Link to comment
king bee66 Posted January 9, 2013 Report Share Posted January 9, 2013 charging a flat rate for a motor is bullshit, they should charge by how many cylinders it has. all of the yards around me do the same thing. Quote Link to comment
ggzilla Posted January 9, 2013 Author Report Share Posted January 9, 2013 Yes what a ripoff. They should charge more for sixes and eights. Quote Link to comment
Rays74 Posted January 10, 2013 Report Share Posted January 10, 2013 Grab that EI dizzy (& pedestal, please!!) with it's HE coil & mount, maybe grab the box that goes with it ('76-78) if'n ya don't wanna use a HEI to control it. Quote Link to comment
tdaaj Posted January 10, 2013 Report Share Posted January 10, 2013 How picked over was that 620, might go back out and check the pumpkin for gears, it did have intermittent wipers Quote Link to comment
king bee66 Posted January 10, 2013 Report Share Posted January 10, 2013 Yes what a ripoff. They should charge more for sixes and eights. I was thinking charge less for 4 cylinders. I dont really care about the larger ones Quote Link to comment
ggzilla Posted January 10, 2013 Author Report Share Posted January 10, 2013 They do. PnP only charges $130 for a long block, or $180 for engine with acccessories. Traditional yards are a ripoff, they want more money than that. Depending on the phase of the moon. Quote Link to comment
ghammer Posted January 10, 2013 Report Share Posted January 10, 2013 A '69 210? > Pick-n-pull fresno has a '69 210 Ok, went back to get a part for my DD chevy truck, looked at car again....quarter panel was marked '69 510....hmmm.....obviously not a 510. Trim tag under hood says KHLB310. I've got pics but need to load them on computer...do it on friday. Quote Link to comment
jrock4224 Posted January 10, 2013 Report Share Posted January 10, 2013 Phixius was checking in the wipers ...... Not a match box either.....I just glanced over it and took a track width measurement for reference..... The complete rear end was there bu I would wait a few days if u been to pap Olympia u know ole lake Import is over flowing here shores at pap....the 620 is on the beach right now but they are pumping the parking lot back in to the yard and filling it up with water ....... Quote Link to comment
Cmac Posted January 11, 2013 Report Share Posted January 11, 2013 Rancho Cordova pick and pull has a turbo 200sx the car is not pick apart yet 1979 280zx struts are gone 1985 300zx complete 1974 b210 Quote Link to comment
Phixius Posted January 12, 2013 Report Share Posted January 12, 2013 olympia pap.....nice i think 79 i never checked but powere assisted brakes ....620 ext cab [img=http://i694.photobucket.com/albums/vv310/jrock42242009/0E4ACCC9-DE57-4F61-97D8-9C2375EC1C50-961-000000EE82C5966A.jpg] [img=http://i694.photobucket.com/albums/vv310/jrock42242009/68E31892-9788-479D-B6A2-9BF2ED789912-961-000000EE89C905EC.jpg] Just stopped by. I saw this truck when it was running. He wanted to trade it for my friends samurai. Still has a 5spd in it. Quote Link to comment
Phixius Posted January 12, 2013 Report Share Posted January 12, 2013 double post... Quote Link to comment
jrock4224 Posted January 12, 2013 Report Share Posted January 12, 2013 hahahahaha that was the worth it, seans samurai is a piece of shat!!!!!!and goldfish owned it......... well intermitent or not ? Quote Link to comment
tdaaj Posted January 12, 2013 Report Share Posted January 12, 2013 hahahahaha that was the worth it, seans samurai is a piece of shat!!!!!!and goldfish owned it......... well intermitent or not ? Was intermittent.......... Quote Link to comment
Johnlorio Posted January 13, 2013 Report Share Posted January 13, 2013 1972 521 pickup and 1974 620 pickup in U Pull It in Albuquerque. Also a 1980 510 wagon and 2 z cars. The z cars are mostly gone, but the other cars are substatnially complete, including engines and drivetrains. If you need small parts our community here in Albuquerque could grab some for you. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.