Sublime27 Posted August 8, 2023 Author Report Share Posted August 8, 2023 Got my shift knob from Deez Knobs looks great! hit him up on Facebook. 3 Quote Link to comment
Stoffregen Motorsports Posted August 8, 2023 Report Share Posted August 8, 2023 All you need now is a bit of shag carpet and a moon roof. Quote Link to comment
Sublime27 Posted August 8, 2023 Author Report Share Posted August 8, 2023 lol yea still looking for someone to redo the bench seat for me i want black so the blanket is what i got right now. then im gonna do the carpet soon that will be black as well. 1 Quote Link to comment
Sublime27 Posted August 8, 2023 Author Report Share Posted August 8, 2023 also wondering what your guys opinions are on cutting the bump stops? im riding on them currently an its not to bad to be honest but ill be getting new tires eventually an will go a bit smaller in the front tires as well. has fairly new shocks all the way around as well. Quote Link to comment
Stoffregen Motorsports Posted August 8, 2023 Report Share Posted August 8, 2023 I'd rather have cut bumpstops than no bump stops or riding on the bumpstops. I think most guys cut them in half. There are generic bumpstops that are softer. Daystar brand. Get them at Summit, Jegs, Speedway... 1 Quote Link to comment
EDM620 Posted August 11, 2023 Report Share Posted August 11, 2023 Bumpstops are there to prevent axle contact directly to the frame. Cut down or get shorter ones, don't roll without. 1 Quote Link to comment
six2ohyea Posted August 11, 2023 Report Share Posted August 11, 2023 1 hour ago, EDM620 said: Bumpstops are there to prevent axle contact directly to the frame. Cut down or get shorter ones, don't roll without. 1 1 Quote Link to comment
datzenmike Posted August 11, 2023 Report Share Posted August 11, 2023 Didn't Icehouse use a flip flop for a bumpstop? 1 1 Quote Link to comment
Sublime27 Posted August 17, 2023 Author Report Share Posted August 17, 2023 What Carbs are you guys running i used to have duel SU's on my KC but i think im just gonna go single carb. whats a good reliable option im all stock right now. an are they easy to install?? Quote Link to comment
Stoffregen Motorsports Posted August 17, 2023 Report Share Posted August 17, 2023 Weber DGV 1 Quote Link to comment
Sublime27 Posted August 20, 2023 Author Report Share Posted August 20, 2023 got my custom crocheted shift boot! gonnabe getting seat recovered soon. 1 Quote Link to comment
Sublime27 Posted August 22, 2023 Author Report Share Posted August 22, 2023 Put in some seatbelts to make the wife happy. 3 Quote Link to comment
six2ohyea Posted August 22, 2023 Report Share Posted August 22, 2023 Seat belts are Important. Lol 1 Quote Link to comment
Sublime27 Posted September 14, 2023 Author Report Share Posted September 14, 2023 Got the Windows tinted an ordered a special part letsjust say it's Carbon Fiber 2 Quote Link to comment
Sublime27 Posted September 15, 2023 Author Report Share Posted September 15, 2023 My shift knob got messed up so he made me a new one an sent me a extra! 1 Quote Link to comment
Rustbin Posted September 15, 2023 Report Share Posted September 15, 2023 Just my thought, the seat needs to be done in black vinyl with red inserts and piping with the rising sun in the center of the back rest. The picture of the truck near the railroad tracks make the graffiti artists look short. A rising sun headliner on a formed board much easier than one with bows, just another thought. 1 Quote Link to comment
Sublime27 Posted September 15, 2023 Author Report Share Posted September 15, 2023 13 hours ago, Rustbin said: Just my thought, the seat needs to be done in black vinyl with red inserts and piping with the rising sun in the center of the back rest. The picture of the truck near the railroad tracks make the graffiti artists look short. A rising sun headliner on a formed board much easier than one with bows, just another thought. Yea ill be doing more of the interior over the winter. gonna be doing black carpet, then the seat was gonna be black with red piping an ill probly take some of your ideas too! i have a new black headliner but im gonna be doing something different. so im probly willing to sell my headliner stuff. also gonna black out other stuff like visors an rearview mirror also looking for a bed cover. 1 Quote Link to comment
Jskinny Posted September 15, 2023 Report Share Posted September 15, 2023 What condition are your floors in? Looks like a bit of rust, got any holes yet? Quote Link to comment
Sublime27 Posted September 15, 2023 Author Report Share Posted September 15, 2023 its just surface stuff, my floors are pretty clean actually some wire brushing an kilmat an she should be nice. Quote Link to comment
Crashtd420 Posted September 15, 2023 Report Share Posted September 15, 2023 1 hour ago, Sublime27 said: its just surface stuff, my floors are pretty clean actually some wire brushing an kilmat an she should be nice. Treat the rusty spots with a rust converter before the kil mat.... Or if they get really clean from the wire wheel at least primer the clean metal so it doesn't come back.... 1 Quote Link to comment
Jskinny Posted September 23, 2023 Report Share Posted September 23, 2023 Where did you get your door cards? I'm torn between those and the double red diagonal stripe... Quote Link to comment
Sublime27 Posted October 22, 2023 Author Report Share Posted October 22, 2023 I got bored so I made a license plate spoiler I'll be bending it up a lil bit more later. still waiting for my Carbon Fiber parts from Portugal but it's in the mail! Quote Link to comment
Sublime27 Posted February 4 Author Report Share Posted February 4 Here's a Lil update. I recently got my dream wheels an installed them. they are 16x8 Weld Racing Typhoons from the 90s. they should have fit flush but found out my truck has spacers an when I tried to take them off I found out i need extended studs but that's alot of work that I don't have time for at the moment so I might put some flares on it. I just gotta find some that will work. 2 Quote Link to comment
iceman510 Posted February 5 Report Share Posted February 5 So if you take the spacers off the original wheel studs are too short to fit through those wheels ? Seems to me wheel studs are are easier or a more desirable outcome than drilling a bunch of holes in the body. 1 Quote Link to comment
Sublime27 Posted February 5 Author Report Share Posted February 5 yea original studs are too short. an I heard that rear drums are alot of work to change studs. I could be wrong only ever changed studs on disc brake setups. also I probably was gonna put flares on at some point anyways. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.