Jetscat7 Posted April 29, 2020 Report Share Posted April 29, 2020 I need some help here. I found out why I was not getting any hot air in my truck. It seams the heater control valve is frozen shut. Does anyone know where to find a replacement? Quote Link to comment
Valvebounce Posted April 30, 2020 Report Share Posted April 30, 2020 I think theres something that van do the job (might not be a direct replamcent) on Amazon. Quote Link to comment
Ninjaneer11 Posted May 1, 2020 Report Share Posted May 1, 2020 I got this one to replace the original. Installs in-line on the heater hose and connects to the heater control cable. Is push to close, so the orientation of your heater control is still correct. https://www.napaonline.com/en/p/BK_6601271 Quote Link to comment
Goemon Posted June 18, 2020 Report Share Posted June 18, 2020 (edited) R-14 Edited June 18, 2020 by Goemon I fucking wanted to 1 Quote Link to comment
Goemon Posted June 18, 2020 Report Share Posted June 18, 2020 Just go look at the Facebook 620 page 2 Quote Link to comment
Pacific coast Datsun Posted June 18, 2020 Report Share Posted June 18, 2020 20 minutes ago, Goemon said: Just go look at the Facebook 620 page The group is "datsun 620 owners" & Joe yocum is the guy thats fabbing these valves up. 2 Quote Link to comment
Goemon Posted June 21, 2020 Report Share Posted June 21, 2020 NOS R-14 valves arm throw needs a mod. I am not making them They are on Ebay 1 Quote Link to comment
Draker Posted June 21, 2020 Report Share Posted June 21, 2020 3 hours ago, Goemon said: NOS R-14 valves arm throw needs a mod. I am not making them They are on Ebay got a link? Quote Link to comment
Eric Posted June 25, 2020 Report Share Posted June 25, 2020 On 6/21/2020 at 7:16 AM, Draker said: got a link? From a renault 14. Quote Link to comment
Goemon Posted July 2, 2020 Report Share Posted July 2, 2020 (edited) The rest of the valves made it after customs covid delay. Bulk Lot of 15 Maybe 5 more left for sale on the net. You gonna have to search real hard , a promise is a promise, Right ? You're Goddamned Right I Edited July 2, 2020 by Goemon sp Quote Link to comment
Negative Ghostrider Posted July 5, 2020 Report Share Posted July 5, 2020 Haha. Hi Joe. 1 Quote Link to comment
Goemon Posted July 30, 2020 Report Share Posted July 30, 2020 $55.00 shipped in contiguous USA These have had the arm mod and will accept the Nissan clip $55.00 shipped in contigous USA PayPal to my email Only 5 left Thanks 1 Quote Link to comment
banzai510(hainz) Posted July 30, 2020 Report Share Posted July 30, 2020 Serbia isn't a high count Datsun area I know of Quote Link to comment
Goemon Posted July 30, 2020 Report Share Posted July 30, 2020 If you don't want one, please, do not buy one. Thank you Quote Link to comment
Draker Posted July 31, 2020 Report Share Posted July 31, 2020 Bolt on replacement after the mod? Quote Link to comment
Goemon Posted July 31, 2020 Report Share Posted July 31, 2020 It does not attach to the heater box. (Unless you do what I am doing) Datsun Stainless Plate pic The hoses will keep it in place. You may have to cut 1/2" off the valve end of the horizontal hose to bring the valve forward a bit to keep the arm from hitting the firewall All else is a drop in fit. These can be taken apart and the oring changed. Just make sure you controls are set to OFF, hold the valve closed and add the cable & clip I only have 5 left. There are only about 5 more in the world I know of for sale These are the ONLY 90° pull to close heat valves I found in 6 months of searching. You will not find anything closer to this unless it is a Nissan Valve, OPEL is close but very expensive.| I don't come here much. Easier to find me in the Datsun groups on FB 1 Quote Link to comment
Birddog223 Posted August 9, 2020 Report Share Posted August 9, 2020 Hello! Are there any of these left? I’m in need of one... Quote Link to comment
Goemon Posted August 9, 2020 Report Share Posted August 9, 2020 Yes $55 shipped to Cali w/ tracking Quote Link to comment
Goemon Posted August 9, 2020 Report Share Posted August 9, 2020 I have one in the box ready to go with extra rear oring seals included 1 Quote Link to comment
yenpit Posted August 9, 2020 Report Share Posted August 9, 2020 Other option is to buy a 240Z valve from Nissan, disassemble & stuff the NEW 240Z internal parts into your OLD 620 valve. I have done lots of 510 valves this way.......... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.