datsuntech Posted March 20, 2020 Report Share Posted March 20, 2020 Anyone have any suggestions for alternative rear axles that came with a LSD and disc brakes? Something light and preferably Japanese, but whatever. The typical ones Mazda RX-7 GSL-SE and Corolla GTS are getting hard to come by and actual Datsun ones are hens teeth. British cars or captive imports? Quote Link to comment
GT2 Posted March 20, 2020 Report Share Posted March 20, 2020 1995 ish Pathfinder, I see them fairly regularly at the pick a part. 1 Quote Link to comment
datzenmike Posted March 20, 2020 Report Share Posted March 20, 2020 I have one. Four pinion 4.625 clutch LSD, H233.... or larger than a Ford 9"...... and HEAVY!!!!! Also available in 4.375 and there was a rear disc brake option for them. I think the Pathfinder axles will swap into the Hardbody but don't quote me. WD21 Pathfinder was coil spring and link but both LSDs will fit the D21 Hardbody axle housing which was leaf spring. Sometime around '95 or 6 the bolts for the 3rd member changed from 10 to 12??? or something. So beware early 3rd members into later housings. You should be able to swap the ring and crown gears for more sensible 3.90s or 4.11s. Did I mention that that two strong people would have trouble carrying a Pathfinder axle??? 1 Quote Link to comment
G-Duax Posted March 20, 2020 Report Share Posted March 20, 2020 Why not just buy an H190 LSD out of Japan, and put it in your carrier ? The H190 LSDs were used in several sedans up to 2008, and OS Giken offers their H190 as a special order item still to this day, basically due to the fact that it is almost identical the R200. These are the truck spline fitment, and only require a spacer between the axles to work in the truck. Typically go for $400-$600 in Japan. The OS Giken LSDs will cost about $1500. 2 Quote Link to comment
datsuntech Posted March 20, 2020 Author Report Share Posted March 20, 2020 (edited) I have a pathfinder axle. Not a good fit for a 1200 or 210. Too big, too heavy and 6 bolt... @G-Duax All I have is H145 , H150 AND H165 carriers... I don't think the H190 carrier will fit. Edited March 20, 2020 by datsuntech 1 Quote Link to comment
datzenmike Posted March 20, 2020 Report Share Posted March 20, 2020 Find an '82-'83 S110 200sx or the first year '84 S12 200sx. They came with a narrow car H-190 four link axle 4 lug. Additionally they were rear disc brake. 1 Quote Link to comment
DaBlist Posted March 21, 2020 Report Share Posted March 21, 2020 On the non-Japanese side a 2WD S10 rear axle can be converted to disc for a reasonable price. One of the cheaper ones for LSD options and gear sets if you are open to building up the rearend. You do give up having a removable center section with these though. Quote Link to comment
datsuntech Posted March 21, 2020 Author Report Share Posted March 21, 2020 (edited) 200SXs are harder to come by than RX-7s and Corollas... Neither of those came with LSDs. Never thought about an S10. I'll have to do some research on those. No idea what size the diff is. Edited March 21, 2020 by datsuntech Quote Link to comment
DaBlist Posted March 21, 2020 Report Share Posted March 21, 2020 9 hours ago, datsuntech said: 200SXs are harder to come by than RX-7s and Corollas... Neither of those came with LSDs. Never thought about an S10. I'll have to do some research on those. No idea what size the diff is. 7.5 ring gear 1 Quote Link to comment
datzenmike Posted March 21, 2020 Report Share Posted March 21, 2020 10 hours ago, datsuntech said: 200SXs are harder to come by than RX-7s and Corollas... Neither of those came with LSDs. Never thought about an S10. I'll have to do some research on those. No idea what size the diff is. Not the S10 they were only H-165 and open. I was referring to the fit. An '82-'83 S110 and '84 S12 I believe are narrow enough to fit a B-210 and are a heavier H-190 or 7.48". The LSD can be bought separately as G Doux mentioned. There are truck H-190s with LSD but not even close to fitting. Fit is everything, no one wants to shorten axles or the housing. Quote Link to comment
Crashtd420 Posted March 21, 2020 Report Share Posted March 21, 2020 56 minutes ago, datzenmike said: Not the S10 they were only H-165 and open. I think he was talking about a Chevy S10.. he did say non Japanese... 1 Quote Link to comment
datsuntech Posted March 21, 2020 Author Report Share Posted March 21, 2020 (edited) 5 hours ago, datzenmike said: Not the S10 they were only H-165 and open. I was referring to the fit. An '82-'83 S110 and '84 S12 I believe are narrow enough to fit a B-210 and are a heavier H-190 or 7.48". The LSD can be bought separately as G Doux mentioned. There are truck H-190s with LSD but not even close to fitting. Fit is everything, no one wants to shorten axles or the housing. I should have been more clear. Chevy S10... Like I said the S110 and '84 S12 are harder to come by around here than RX-7s and AE86s. I wish I had kept the diffs from my old S110s but they never came with a LSD anyway. (at least not in this country) Also I'm a cheapskate, so buying a $1000 LSD is never going to happen. I was racking my brain for other factory options of light diffs with LSD, but couldn't come up with many. That's why I put it to the collective knowledge of Ratsun... The Chevy S10 is interesting as it is a lighter diff and chevy LSDs are exactly expensive. I have no need to have a removable pumpkin so that's not an issue.. Disc brakes, not sure what they might have come on as I like to use off the shelf parts. No need to reinvent the wheel. V6 Camaro? 4 cyl S-series truck? Vega? What about Ford? Pinto? Ranger 4cyl? I guess I have a lot of googling to do. Thanks for the tips guys. I'm open to all suggestions.. Edited March 21, 2020 by datsuntech Quote Link to comment
hosestop@msn.com Posted March 21, 2020 Report Share Posted March 21, 2020 Ford 8.8 narrowed. 1 Quote Link to comment
datsuntech Posted March 21, 2020 Author Report Share Posted March 21, 2020 (edited) A little heavy.... I'm thinking Ford 7.5 from a Ranger. Cheap. Not super wide and easily found. Also can be found with a LSD. 16 minutes ago, hosestop@msn.com said: Ford 8.8 narrowed. Edited March 21, 2020 by datsuntech Quote Link to comment
DaBlist Posted March 22, 2020 Report Share Posted March 22, 2020 Should have said Chevy S10. Quote Link to comment
datzenmike Posted March 22, 2020 Report Share Posted March 22, 2020 When I see S10 I have a Datsun bias. Quote Link to comment
datsuntech Posted March 22, 2020 Author Report Share Posted March 22, 2020 Datzenmike I get the Datsun bias. Right there with you. DaBlist and I were on the same page... Quote Link to comment
rusty12ver Posted March 22, 2020 Report Share Posted March 22, 2020 How about an Alfa Romeo spider diff? circa 80’s. Discs, lsd in most. Autos came with 3.5, manuals came with 4.1 and 4.5 ratios. cheap and I believe parts are still available to rebuild. Not sure if I would call it the “best”, but I would say it would handle a street driven a- series 1200 or 210. Roughly measure 53ish inches from disc to disc. 1 Quote Link to comment
hosestop@msn.com Posted March 24, 2020 Report Share Posted March 24, 2020 Got 8.8 from a mustang narrowed and installed a single traction bar slightly off center with heim joint in a SR20det wagon ,also had to cut out under seat area for bigger dif. will try and find pics . Quote Link to comment
datsuntech Posted March 24, 2020 Author Report Share Posted March 24, 2020 34 minutes ago, hosestop@msn.com said: Got 8.8 from a mustang narrowed and installed a single traction bar slightly off center with heim joint in a SR20det wagon ,also had to cut out under seat area for bigger dif. will try and find pics . Way to strong for what I need, but definitely interested in pics. Quote Link to comment
datsuntech Posted March 24, 2020 Author Report Share Posted March 24, 2020 On 3/21/2020 at 11:01 PM, rusty12ver said: How about an Alfa Romeo spider diff? circa 80’s. Discs, lsd in most. Autos came with 3.5, manuals came with 4.1 and 4.5 ratios. cheap and I believe parts are still available to rebuild. Not sure if I would call it the “best”, but I would say it would handle a street driven a- series 1200 or 210. Roughly measure 53ish inches from disc to disc. I'm going to have to check that out. I've seen a couple in the junkyard. Quote Link to comment
mrbigtanker Posted March 24, 2020 Report Share Posted March 24, 2020 Untitled by raymond medeiros, on Flickr I just went with a custom Currie rear end. 3 Quote Link to comment
Stoffregen Motorsports Posted March 24, 2020 Report Share Posted March 24, 2020 Sometimes the custom option is the best way. So many boxes checked and built to the spec you need. All in, probably $3500 complete with R&P, LSD, shafts, brakes, etc. How much time and money will you spend on a junkyard axle to get the right carrier, the gears you want and upgrade the brakes? Probably close to $2000 or more. I like the custom axle option. Quote Link to comment
datsuntech Posted March 24, 2020 Author Report Share Posted March 24, 2020 1 hour ago, mrbigtanker said: Untitled by raymond medeiros, on Flickr I just went with a custom Currie rear end. Nice! But you must have missed the part where I'm cheap.... 😉 1 1 Quote Link to comment
datsuntech Posted March 24, 2020 Author Report Share Posted March 24, 2020 2 minutes ago, Stoffregen Motorsports said: Sometimes the custom option is the best way. So many boxes checked and built to the spec you need. All in, probably $3500 complete with R&P, LSD, shafts, brakes, etc. How much time and money will you spend on a junkyard axle to get the right carrier, the gears you want and upgrade the brakes? Probably close to $2000 or more. I like the custom axle option. My time is just that. My time, I don't count that in. I used to build diffs and driveshafts for heavy duty so slapping together a bunch of junkyard parts is no big deal. In fact I kind of enjoy it when I'm not on the clock. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.