mhub91 Posted January 28, 2018 Author Report Share Posted January 28, 2018 At times, I wish I would have left the A14 in it just so I could drive the damn thing.... 2 Quote Link to comment
datzenmike Posted January 28, 2018 Report Share Posted January 28, 2018 Hell a ride would be good enough. You can show me what it can do. Quote Link to comment
mhub91 Posted January 29, 2018 Author Report Share Posted January 29, 2018 Only thing I'm worried about is the rear end blowing up. Quote Link to comment
Dguy210 Posted January 29, 2018 Report Share Posted January 29, 2018 Only thing I'm worried about is the rear end blowing up. I put the 510 wagon rearend (H190) in my 1200 sedan KA swap. Pretty much bolt-in, should fit the B210 pretty well. 1 Quote Link to comment
mhub91 Posted January 29, 2018 Author Report Share Posted January 29, 2018 I put the 510 wagon rearend (H190) in my 1200 sedan KA swap. Pretty much bolt-in, should fit the B210 pretty well. Thanks for the tip. Quote Link to comment
datsunfreak Posted January 29, 2018 Report Share Posted January 29, 2018 Thanks for the tip. FYI, it's roughly 2" wider, but is basically a bolt-in affair as he said. http://community.ratsun.net/topic/70305-datsun-rear-axle-widths-b-310-and-others/ I have used (and abused) B210 rear ends with engines this strong or stronger in 1200s with no fuss. I do have a minor concern that in the heavier B210 your experience may vary. Quote Link to comment
datzenmike Posted January 30, 2018 Report Share Posted January 30, 2018 Don't forget the tire acts like a fuse. 2 Quote Link to comment
bananahamuck Posted January 30, 2018 Report Share Posted January 30, 2018 I'm in them $350 Bullshit i see the fiberglass ones on Craigslist all the time for like $150. bucks ,, and they don't rust and bend.. I will give you $75. dollars and you deliver . . Quote Link to comment
mhub91 Posted January 30, 2018 Author Report Share Posted January 30, 2018 Swear dude. Got them from Mike Currier in Yakima for $350. 1 Quote Link to comment
mhub91 Posted February 16, 2018 Author Report Share Posted February 16, 2018 Not much news lately. Missing my 320 and really want to drive that. Quote Link to comment
mhub91 Posted April 24, 2019 Author Report Share Posted April 24, 2019 (edited) Over a year without an update. It's done for the most part. Currently at a friends house getting exhaust built. 302 Stainless, full tig welded with pie cuts... should be pretty. Will post pics of exhaust later, but for now, enjoy. (In no particular order) Edited April 24, 2019 by mhub91 1 Quote Link to comment
datzenmike Posted April 24, 2019 Report Share Posted April 24, 2019 Fix the front camber. Quote Link to comment
mhub91 Posted April 24, 2019 Author Report Share Posted April 24, 2019 19 minutes ago, datzenmike said: Fix the front camber. It's a bit extreme at the moment. It will definitely have noticeable negative camber, but certainly not... 12 degrees. LOL Quote Link to comment
datzenmike Posted April 24, 2019 Report Share Posted April 24, 2019 I see expensive camber plates going to waste. Quote Link to comment
metalmonkey47 Posted April 24, 2019 Report Share Posted April 24, 2019 This is awesome man, well executed. 1 Quote Link to comment
datzenmike Posted April 24, 2019 Report Share Posted April 24, 2019 Yeah, that should go pretty good.... Quote Link to comment
mhub91 Posted May 7, 2019 Author Report Share Posted May 7, 2019 On 4/24/2019 at 6:25 AM, datzenmike said: I see expensive camber plates going to waste. Finally brought it into the shop (I work at Toyota) and put it on the alignment rack.... -4.5 degrees of camber, +1.5deg of caster and around +0.15deg of toe-in. Drives like a fucking go-kart!!!!! Quote Link to comment
sunny310 Posted May 8, 2019 Report Share Posted May 8, 2019 Been thinking about an L20b swap in my B310 lately. Starting to get tired of my A14 already Quote Link to comment
datzenmike Posted May 8, 2019 Report Share Posted May 8, 2019 Hp is very addicting. True. Quote Link to comment
mhub91 Posted June 20, 2019 Author Report Share Posted June 20, 2019 (edited) Removed. Edited April 7, 2020 by mhub91 Quote Link to comment
mhub91 Posted April 5, 2020 Author Report Share Posted April 5, 2020 (edited) Due to the cock sucking nature of WA State governor, Jay Inslee, I have been laid off of work since March 14... Car has been totally parted out and sold off. Got about a 75% return on money invested and the shell went to a hood home. Edited May 17, 2020 by mhub91 1 Quote Link to comment
charolastra Posted May 23, 2020 Report Share Posted May 23, 2020 Man, sorry to heard that. It was a fucking nice car Quote Link to comment
afracer Posted May 24, 2020 Report Share Posted May 24, 2020 Yeah your governor sucks (technically mine as well). Washington used to be halfway decent before it was completely taken over by Californians. I don't think I'll ever move back there permanently anymore. Good luck getting a new job and a new project car! Quote Link to comment
datzenmike Posted May 24, 2020 Report Share Posted May 24, 2020 Couldn't you just throw a tarp over it in the hopes of coming back when your fortunes change for the better? Quote Link to comment
mhub91 Posted May 24, 2020 Author Report Share Posted May 24, 2020 13 hours ago, datzenmike said: Couldn't you just throw a tarp over it in the hopes of coming back when your fortunes change for the better? Definitely could have. But, behind the scenes of Ratsun, I have spent way too much time and money into (after all..) a 4dr B210. I was starting to feel a bit guilty. I've got a young kiddo. She needs a college fund more than dad needs a B210 race car. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.