320 Newb Posted September 5, 2019 Report Share Posted September 5, 2019 Yeah mine has 'em too. I can try to get pics for you tomorrow. 2 Quote Link to comment
wayno Posted September 5, 2019 Report Share Posted September 5, 2019 (edited) Here are photos, but all mine have drop arms so that will make the photos of the lower control arms look strange. Edited September 5, 2019 by wayno 2 Quote Link to comment
difrangia Posted September 5, 2019 Report Share Posted September 5, 2019 Page 200 (PDF page #) of factory parts manual available at this NICO forum link: https://www.nicoclub.com/FSM/datsun 320 parts catalog.pdf Everyone with a 320 needs to download this PDF. 3 Quote Link to comment
Stoffregen Motorsports Posted September 5, 2019 Report Share Posted September 5, 2019 Neither of my 320s had sway bars. 2 Quote Link to comment
Conner Posted September 6, 2019 Report Share Posted September 6, 2019 My L320, 1964 model year, does have the front sway bar. 2 Quote Link to comment
320 Newb Posted September 6, 2019 Report Share Posted September 6, 2019 22 hours ago, Stoffregen Motorsports said: Neither of my 320s had sway bars. My 62 has 'em. Did some 320s come without sway bars or are they a common thing for people to ditch? 3 Quote Link to comment
emceefarlane Posted September 9, 2019 Author Report Share Posted September 9, 2019 Well i'll be damned Anyone in Australia selling a sway bar setup? 2 Quote Link to comment
ol' 320 Posted October 6, 2019 Report Share Posted October 6, 2019 The only pic of your truck that shows up for me is of your dash. Any chance you can post a coupe of pics? 1 Quote Link to comment
emceefarlane Posted October 24, 2019 Author Report Share Posted October 24, 2019 On 10/7/2019 at 3:31 AM, ol' 320 said: The only pic of your truck that shows up for me is of your dash. Any chance you can post a coupe of pics? I've got all the pics saved so when i get some time i'll move through and restore them all 1 Quote Link to comment
emceefarlane Posted February 4, 2020 Author Report Share Posted February 4, 2020 (edited) new member of the family new 520 wheel with horn ring button that i picked up last week Edited February 4, 2020 by emceefarlane 3 Quote Link to comment
320 Newb Posted February 4, 2020 Report Share Posted February 4, 2020 That wheel is bonkers gorgeous! Where did you find it? 2 Quote Link to comment
Stoffregen Motorsports Posted February 4, 2020 Report Share Posted February 4, 2020 The Holden looks like a 56 Chevy with Crown Vic headlights and grill. Cool! 1 Quote Link to comment
Charlie69 Posted February 4, 2020 Report Share Posted February 4, 2020 (edited) 65/66 520 used same wheel and horn button/ring. Edited February 4, 2020 by Charlie69 Quote Link to comment
emceefarlane Posted February 6, 2020 Author Report Share Posted February 6, 2020 On 2/4/2020 at 2:55 PM, 320 Newb said: That wheel is bonkers gorgeous! Where did you find it? Saw some guy was wrecking a 520 on FB marketplace and messaged him. I also got the column shroud and gearknob which are black as well for $100 - pretty good On 2/5/2020 at 3:28 AM, Stoffregen Motorsports said: The Holden looks like a 56 Chevy with Crown Vic headlights and grill. Cool! yeah FB/EK holdens were pretty much a direct rip off of chevy design which people of the time considered dated. Most preffered the look of the 62 ford falcon as it was more "futuristic" but the early fords couldn't handle the aus roads very well & got a bad wrap pretty early on 2 Quote Link to comment
emceefarlane Posted February 10, 2021 Author Report Share Posted February 10, 2021 (edited) New book, $20 from fb marketplace pretty goo find imo Edited February 10, 2021 by emceefarlane 1 Quote Link to comment
Charlie69 Posted February 10, 2021 Report Share Posted February 10, 2021 On 6/13/2019 at 7:55 AM, 320 Newb said: Has anyone found a headlight gasket replacement? I have the original 66 headlight gaskets for my 66 520, I wonder if they are the same? I think I made a template I will check this weekend. Quote Link to comment
320 Newb Posted February 10, 2021 Report Share Posted February 10, 2021 41 minutes ago, Charlie69 said: I have the original 66 headlight gaskets for my 66 520, I wonder if they are the same? I think I made a template I will check this weekend. I ended up cutting my own headlight gaskets but this would be great info to know. 1 Quote Link to comment
emceefarlane Posted February 11, 2021 Author Report Share Posted February 11, 2021 Image dump for all the previous pics that no longer work 4 Quote Link to comment
emceefarlane Posted July 15, 2021 Author Report Share Posted July 15, 2021 Looks like i can get my hand on a J16 locally which i would like to transplant in instead of the E1 I've found another forum post about fitting a J16 to an E1 gearbox (i'd like to keep the column shift) and all that it needs is the E1 flyweel and starter and engine mounts - is this correct? Should be pretty easy if that's the case 2 Quote Link to comment
320 Newb Posted July 16, 2021 Report Share Posted July 16, 2021 On 7/14/2021 at 11:56 PM, emceefarlane said: Looks like i can get my hand on a J16 locally which i would like to transplant in instead of the E1 I've found another forum post about fitting a J16 to an E1 gearbox (i'd like to keep the column shift) and all that it needs is the E1 flyweel and starter and engine mounts - is this correct? Should be pretty easy if that's the case I'm not positive but that sounds right. I've got a J15 with an E1 column shift gearbox, E1 starter, generator, carb... 2 Quote Link to comment
emceefarlane Posted October 14, 2021 Author Report Share Posted October 14, 2021 1 Quote Link to comment
Stoffregen Motorsports Posted October 14, 2021 Report Share Posted October 14, 2021 Uh oh. 1 Quote Link to comment
emceefarlane Posted October 16, 2021 Author Report Share Posted October 16, 2021 going to be giving this a birthday and then chucking it in. the extra ~20kw will be nice Quote Link to comment
emceefarlane Posted October 16, 2021 Author Report Share Posted October 16, 2021 going to be giving this a birthday and then chucking it in. the extra ~20kw will be nice Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.