hobospyder Posted March 2, 2015 Report Share Posted March 2, 2015 Start at the bottom work your way up if you want actual order of events Edit: nvm they all mixed up 2 Quote Link to comment
hobospyder Posted March 2, 2015 Report Share Posted March 2, 2015 stupid vw in the middle of the datsuns ruining the shot ......... oh wait :rofl: 1 Quote Link to comment
bananahamuck Posted March 2, 2015 Report Share Posted March 2, 2015 How come you guys couldn't drive a tiny bit farther?? What's up with that ?? Nelson if you are reading this,, both you and Frank are both now banned from any further Datsun activties close to their homes. :D RON1200s 620RATDAT3s beautiful upholstery work on skibbers old truck... 2 Quote Link to comment
tdaaj Posted March 2, 2015 Report Share Posted March 2, 2015 I talked to nelson that day, said he couldn't get his truck running. 1 Quote Link to comment
bananahamuck Posted March 2, 2015 Report Share Posted March 2, 2015 UNACCEPTABLE!! :rofl: We were looking for drivers for some of the rest of JJs fleet half the morning when his neighbors decided not to.. But Dywane still came on his bike as a so i can't be mad at him. I just noticed i got no real clear shots of KevinShits 521 or it's engine,, thought i had some from the house and such,,, but no. Sorry youngster Quote Link to comment
mklotz70 Posted March 3, 2015 Report Share Posted March 3, 2015 What the F'n Hell?!!!!! I see pics of a stretched 521 towing a 6 wheel 520 dump bed and there's no mention of who's it is or any details?! Someone want to clue me in? Build threads? I sure as hell hope they're coming to Canby!!!! 2 Quote Link to comment
Fat510 Posted March 3, 2015 Report Share Posted March 3, 2015 What the F'n Hell?!!!!! I see pics of a stretched 521 towing a 6 wheel 520 dump bed and there's no mention of who's it is or any details?! Someone want to clue me in? Build threads? I sure as hell hope they're coming to Canby!!!! Yeah, that's Von. he goes by JJ, he lives down the street from bananahamuck and me. He came to canby last year in a white 411 General information: The 521 is running 720 frame with a carbed ford 5.0 in there hooked to a C4 tranny with 3/4 ton ford rear. The 520 is on a 79 620 frame with an L series (i don't remember the size) 5speed. 1 Quote Link to comment
mklotz70 Posted March 3, 2015 Report Share Posted March 3, 2015 Thanks!!! Is he on Ratsun? Any threads with more pics? Is he coming to Canby? They're both very unique which gets my interest!! :) 2 Quote Link to comment
bananahamuck Posted March 3, 2015 Report Share Posted March 3, 2015 Be careful what you wish for... :rofl: i judge time by the ages of my sons , so that leads me to believe that stretched ot 521 is about 16 years old,, i will work on a few old pics of it pulling his roadster racecar.. I saw them in a shoebox when he i was over there critiquing his new crooked ass countertop a few years ago... Johnny Deere truck is still a "work" in progress. Ratsun = no On a related note: Both those SSS 411s in pictures are running knock-off Klotz brake brackets. Bill found a way to change caliper position in order to use all 4 bolt holes and since ( this i was told) SSS hubs place the rotor farther out stock , here was no need to use bearing spacer.. He is very happy with the stopping power,, since both cars are stroked to 2000 running 5speeds they need it. I hope your not mad but i did read once you were into doing the science but manufacturing wasn't your end game.. If it will set your mind at ease , although they were traced off mine no money changed hands, nor will it ,, he asked if he could trace and of course i said yes. :blush: 2 Quote Link to comment
mklotz70 Posted March 3, 2015 Report Share Posted March 3, 2015 Not mad :) If he's not going to manufacture them and sell them, ask him to clue me in and I'll see about doing them so that the SSS guys can have better brakes. If he is going to make them available, tell him to make sure I have his contact info so I can send the SSS guys to him. :) I had a guy on the 311s.org forum copy my roadster kit spacers and is selling complete packages with rotors and calipers. I had said that I didn't want to deal with the calipers and complete packages, so I couldn't be mad at him either.....would have been nice if he'd have contacted me, but oh well. I can't keep up with everything anyway....heck....I have guys that have waited....what..6years now?....for me to come up with a rear disc kit on the trucks. :) 1 Quote Link to comment
bananahamuck Posted March 4, 2015 Report Share Posted March 4, 2015 Those are just his and his daughters cars,, if he does make any,, it will probably mean another family member got a 411. But i will tell him.. 1 Quote Link to comment
jrock4224 Posted March 4, 2015 Report Share Posted March 4, 2015 jj .. von ... lolololololololol.... works in progress... all his stuff is Quote Link to comment
freekwonder Posted March 4, 2015 Report Share Posted March 4, 2015 dammit a good turn out and I miss it. Had plans to come out, but had family come to town at the last minute. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.