goes2fast Posted January 6, 2015 Report Share Posted January 6, 2015 Needs to be something other than a Honduh. :rofl: 1 Quote Link to comment
q-tip Posted January 7, 2015 Report Share Posted January 7, 2015 Lots of horse power for doing a bunch of nothin 1 Quote Link to comment
Mattndew76 Posted January 7, 2015 Report Share Posted January 7, 2015 Hey I can rev to 30,000 RPM Quote Link to comment
paradime Posted January 12, 2015 Report Share Posted January 12, 2015 ^^ Oh, spank you very much. Quote Link to comment
goes2fast Posted January 12, 2015 Report Share Posted January 12, 2015 My 57 Chevy engine 2 Quote Link to comment
goes2fast Posted January 13, 2015 Report Share Posted January 13, 2015 This belongs to a friend of mine. 3 Quote Link to comment
Ranman72 Posted January 13, 2015 Report Share Posted January 13, 2015 ^^ Oh, spank you very much. Oh spank myself very much Quote Link to comment
paradime Posted January 13, 2015 Report Share Posted January 13, 2015 That causes blindness. I'm living proof. 1 Quote Link to comment
RockFord_ Posted January 13, 2015 Report Share Posted January 13, 2015 you can't breathe near this engine without making a spot 3 Quote Link to comment
]2eDeYe Posted January 13, 2015 Report Share Posted January 13, 2015 Should have let it finish the complete cycle before .giffing #1 & #6 hurt my OCD Quote Link to comment
q-tip Posted January 14, 2015 Report Share Posted January 14, 2015 ^^^now I can't unsee that, dammit! Quote Link to comment
Chuck Most Posted January 16, 2015 Report Share Posted January 16, 2015 Slightly smaller than average dick, so... 1 Quote Link to comment
captaingamez Posted January 16, 2015 Report Share Posted January 16, 2015 The truck has only 2 axles with 2 sets of dual wheels per axle. There is no drive line with electric power. The electric motors are not direct drive to the wheels, they go through at least one set of gears. I am refering to that as a driveline. Quote Link to comment
goes2fast Posted January 16, 2015 Report Share Posted January 16, 2015 The electric motors are not direct drive to the wheels, they go through at least one set of gears. I am refering to that as a driveline. A drive line is another name for a drive shaft, the gears in the application you are talking about are in the wheel hubs with the motors. Quote Link to comment
goes2fast Posted January 16, 2015 Report Share Posted January 16, 2015 Slightly smaller than average dick, so... Any one know what kind of engine this is? I don't recognize it from this pic. :confused: Quote Link to comment
paradime Posted January 17, 2015 Report Share Posted January 17, 2015 Wright R-2160 Tornado42 cylinder inline radial engine. (7-banks with 6 cylinders in each bank) http://en.wikipedia.org/wiki/Wright_R-2160_Tornado#General_characteristics 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.