izzo Posted March 25, 2014 Report Share Posted March 25, 2014 ^^^ Guy who posted above is a cry baby. Deciding my 720s fate. Not looking good at this point. Quote Link to comment
JoeCool Posted March 26, 2014 Report Share Posted March 26, 2014 ^^^ Guy who posted above is a cry baby. Deciding my 720s fate. Not looking good at this point. I see you are still hiding behind your computer monitor talking shit Jizzo! You must have been bullied a lot as a child, that is why you do it so much on the internet now where no one can see you and there is no worry of getting your ass kicked. How childish and pathetic. Quote Link to comment
nismo24096 Posted March 26, 2014 Report Share Posted March 26, 2014 Well I got the front bumper straightened out and primed. I will be doing the entire truck the green etching primer. 1 Quote Link to comment
JoeCool Posted March 27, 2014 Report Share Posted March 27, 2014 Green primer eh... can't wait to see how that turns out! I think it will look good. Quote Link to comment
hellcatfa Posted March 28, 2014 Report Share Posted March 28, 2014 Today I made a spring for my anti dieseling solenoid, and soldered the wire back onto it. It was tricky finding a spring that fit properly. I had to turn a pull spring into a pusher. Also pondered on welding the holes up on my muffler/tailpipe. Thought about charging the a/c. Quote Link to comment
filthy forever Posted March 28, 2014 Report Share Posted March 28, 2014 my brother and I mounted the KA in my 720 today :thumbup: clears the crossmember and center link wooohoooo. ill post some pictures tomorrow long day today Quote Link to comment
Jonas720 Posted March 28, 2014 Report Share Posted March 28, 2014 Saturday I replaced the passenger window mechanism and removed the rear bumper. Oh and replaced the tailgate handle. I will be installing fender mirrors soon be waiting for the pics. Quote Link to comment
JoeCool Posted March 29, 2014 Report Share Posted March 29, 2014 Installed a new brake light switch behind the pedal, my brake lights worked sometimes... NOT GOOD! And got some new stock style mirrors in I ordered from AutoZone earlier in the week. Driver side glass was scratched up so bad I could barely see, and passenger side was N/A. Haven't had one since I bought the truck in summer of 2012. It had one, but it was broken and dangling down. So I just unbolted it. But when the bed is full of stuff, it was aggravating not being able to see on the right! Put them on this afternoon, then went to the dump to throw out my old mattress and mattress store to pick up the new one, and boy, that passenger mirror is handy! I would upload pics, but Photofuckit is being an asshole! Quote Link to comment
hellcatfa Posted March 29, 2014 Report Share Posted March 29, 2014 Charged the a/c today, and welded on the tail pipe a bit. Quote Link to comment
hellcatfa Posted March 30, 2014 Report Share Posted March 30, 2014 Installed new upper and lower ball joints. Quote Link to comment
arizonajones Posted April 2, 2014 Report Share Posted April 2, 2014 Painted my grill gloss black and clear coated the Datsun emblem(grill). Last week, I finished re-upholstering 1 of 2 bucket seats. Classing her up! Quote Link to comment
_chiefjt Posted April 4, 2014 Report Share Posted April 4, 2014 Changed the transmission gear oil at my high school auto shop. SENIOR YEAR BABY! Drain plug was tight as shit though. I broke it looks with a breaker bar and used a cheater bar (floor jack bar) and it broke loose. Not a good shot from underneath but I'm changing the diff oil next week so I'll get a better one. :D Quote Link to comment
NissanEgg Posted April 7, 2014 Report Share Posted April 7, 2014 Did this to my 85 last week. 1 Quote Link to comment
85 nissan Posted May 20, 2014 Report Share Posted May 20, 2014 I replaced a transmission rear seal, also differential and transmission fluids, but I have a problem. I don't know the location of this bump (see pic) to the drivers side or passenger side thanks for you help Quote Link to comment
wayno Posted May 20, 2014 Report Share Posted May 20, 2014 There should be two bumps, and they both go down. Quote Link to comment
85 nissan Posted May 20, 2014 Report Share Posted May 20, 2014 There should be two bumps, and they both go down. I double check only one bump, should be pointed to 4 or 8 oclock thanks Quote Link to comment
wayno Posted May 20, 2014 Report Share Posted May 20, 2014 I double check only one bump, should be pointed to 4 or 8 oclock thanks Then there should not be any bumps, and it just got bent. Quote Link to comment
85 nissan Posted May 20, 2014 Report Share Posted May 20, 2014 Then there should not be any bumps, ok, I found this http://community.ratsun.net/topic/40035-newish-720-owner-here/page-2 there is a pic of the center bearing thanks wayno Quote Link to comment
mmitchell57 Posted May 23, 2014 Report Share Posted May 23, 2014 Last week I loosened up the torsion bars to close up the gap on the front wheels. Pulled 2 inches out and have about 2 inches of wheel gap. Also took another step to cleaning up the engine compartment. Pulling crap off the intake manifold and pluggin holes with bolts. Crazy how simple vacume links can cause huge issues. This weekend, Clear out more crap from the engine bay. Pulling the AC system since I've got no interest in it. Only part staying is the box in the cabin. Quote Link to comment
SlammedhappySteveO Posted May 29, 2014 Report Share Posted May 29, 2014 sincer were talking interchange, got a question... one I should know but my dains brammaged :rofl: looking to swap my tail light from an 85' 720 donor to my 84' DD 720, but doesn't look right, and its been a while since I posted a dumb question, sooo let er rip! My oems are sunfaded and im just waiting to get a ticket! Hopefully someone knows for sure so I can pull and swap when I get home or make any mods.. Love the round headlight conversion above ^^^^^^ , that's pretty sic! what was the donor that made that happen, never seen one like that! thanks and happy ratsuning Quote Link to comment
SlammedhappySteveO Posted May 29, 2014 Report Share Posted May 29, 2014 what I waqs referring to was page 5, interchangables and the round headlight 720 conversion - sorry guys.... didn't realize jus cuz I was reading page five my response would be on 8 and everyone would be like WHAAAAAT is this tool talking about :poop: :confused: Quote Link to comment
Flailguy Posted May 29, 2014 Report Share Posted May 29, 2014 Hello all first post here. But I adjusted my carb float and idle speed. Put in a new battery. 85' 720 st 2wd Quote Link to comment
Justin Berni Posted May 30, 2014 Report Share Posted May 30, 2014 <iframe src="https://www.flickr.com/photos/124239908@N02/14306094295/player/e81db295a7" height="500" width="374" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe> Quote Link to comment
Justin Berni Posted May 30, 2014 Report Share Posted May 30, 2014 still cant figure out how to post pictures, shit.... got a roof rack and new wheels tho. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.