Redrumls Posted July 28, 2017 Report Share Posted July 28, 2017 Here's my other goon just sitting there... 73 rx3..hopefully get to it soon. I want both goons running. :) Greg Quote Link to comment
edekalil Posted July 29, 2017 Report Share Posted July 29, 2017 Need some info, what is the length of the two hoses that connect from the gas tank to the elbow connection that go's up to the plastic return canister. I know there are two hoses but not sure of the correct length's. Gotta get this gas tank back in here soon. I now have gas resistance hose for it. Any help would be appreciated. Quote Link to comment
Redrumls Posted July 29, 2017 Report Share Posted July 29, 2017 Need some info, what is the length of the two hoses that connect from the gas tank to the elbow connection that go's up to the plastic return canister. I know there are two hoses but not sure of the correct length's. Gotta get this gas tank back in here soon. I now have gas resistance hose for it. Any help would be appreciated. If I get a chance tomorrow, I get under there & look. Greg Quote Link to comment
edekalil Posted July 29, 2017 Report Share Posted July 29, 2017 If I get a chance tomorrow, I get under there & look. Greg Thank you that will help. Quote Link to comment
JohnnyBlu Posted August 1, 2017 Report Share Posted August 1, 2017 out with the L. time for KA 3 Quote Link to comment
datsunfreak Posted August 2, 2017 Report Share Posted August 2, 2017 Been driving my goon around the mountains where I live.. the ka24de does well up here.. sr20det on the agenda now! Or maybe a turbo setup for the ka24de, which ever comes first. Sooo... What's up with that Nova? ^_^ 1 Quote Link to comment
Redrumls Posted August 2, 2017 Report Share Posted August 2, 2017 Sooo... What's up with that Nova? ^_^It's going through a full restoration. Getting ready to put it on a rotisserie, you can barely see the rotisserie in the pic. I have a dse subframe for it(which cost me 8k with accessories), ls2 with ls3 heads, wiring, fi gas tank etc.. I just need time..& of course some more $$. I've had it for a long time..64 ss, factory v8 & 4 spd car. I want it turn key, fuel injected & reliable now. ;)Greg 2 Quote Link to comment
datsunfreak Posted August 2, 2017 Report Share Posted August 2, 2017 It's going through a full restoration. Getting ready to put it on a rotisserie, you can barely see the rotisserie in the pic. I have a dse subframe for it(which cost me 8k with accessories), ls2 with ls3 heads, wiring, fi gas tank etc.. I just need time..& of course some more $$. I've had it for a long time..64 ss, factory v8 & 4 spd car. I want it turn key, fuel injected & reliable now. ;) Greg I like where this is going. :thumbup: 1 Quote Link to comment
Redrumls Posted August 2, 2017 Report Share Posted August 2, 2017 Ill post a few pics.. My iPhone messed up so I lost most of my Pics, I took a few with the iPad. 2 Quote Link to comment
heywier427 Posted August 2, 2017 Report Share Posted August 2, 2017 I dont see a supercharger listed... 1 Quote Link to comment
Redrumls Posted August 2, 2017 Report Share Posted August 2, 2017 I dont see a supercharger listed... I wish... supercharger or turbo... I think it'll be fast enough to get me into some trouble:) Greg Quote Link to comment
heywier427 Posted August 2, 2017 Report Share Posted August 2, 2017 I have a refub ebay one and cathedral port adapters just waiting to be plopped on to my ext :) Its damn near plug and play, so why not! 1 Quote Link to comment
Redrumls Posted August 2, 2017 Report Share Posted August 2, 2017 I have a refub ebay one and cathedral port adapters just waiting to be plopped on to my ext :) Its damn near plug and play, so why not! If I didn't have so many projects it would of probably have been finished already & have some killer parts like you do...the way I want it too... I just can't find myself to sell some of the cars I recently picked up, I know I would regret it.. so my obsession with classic cars has me in the situation I'm in.. so progress is slow.. I have am instagram account just for my cars. Redrumlscarjunkie I have my projects on there ;) Greg Quote Link to comment
edekalil Posted August 4, 2017 Report Share Posted August 4, 2017 Greg, if time permits and you get a chance check those measurements on those hoses. Thanks and those are some very nice cars. My brouther had got a 62 Impala SS back around 1971 and it was gold on the outside with a white hardtop and white interior. 3 on the tree, 327. It was beautiful till he wrecked the shit out of it. I miss that car. Back then you could have a learners permit at 14 and drive till about 11pm on it. If you hade your 15 year old friend who had a drivers license with you you could drive all night. 1 Quote Link to comment
Redrumls Posted August 4, 2017 Report Share Posted August 4, 2017 Greg, if time permits and you get a chance check those measurements on those hoses. Thanks and those are some very nice cars. My brouther had got a 62 Impala SS back around 1971 and it was gold on the outside with a white hardtop and white interior. 3 on the tree, 327. It was beautiful till he wrecked the shit out of it. I miss that car. Back then you could have a learners permit at 14 and drive till about 11pm on it. If you hade your 15 year old friend who had a drivers license with you you could drive all night. I got under there to look, I can only see one hose & its hard to get a measurement because it goes toward the drivers side & loops back towards the tank. That particular hose looks to be at least 30" long. The other I can't see, it's on top of the tank. Sorry man... I could of answered that question when I put the tank on, I just can't remember. Greg Quote Link to comment
Angela Posted August 4, 2017 Report Share Posted August 4, 2017 Look what I found inside a 610 I purchased... the elusive factory 510 wagon locking gas cap.. I was stoked! Greg Great find Greg! Question for you...& anyone else that has one of these rare pieces...does it fit snuggly & securely? When I've put mine on, it seems like you could wiggle it off if you really tried. I remember a few years back that some turd stole one off someone's Dime at the Eagle Rock meet. Thanks, Angela 2 Quote Link to comment
Redrumls Posted August 4, 2017 Report Share Posted August 4, 2017 Great find Greg! Question for you...& anyone else that has one of these rare pieces...does it fit snuggly & securely? When I've put mine on, it seems like you could wiggle it off if you really tried. I remember a few years back that some turd stole one off someone's Dime at the Eagle Rock meet. Thanks, Angela I heard there is an earlier year gas cap & a later one. The inside diameter where it goes in and locks, one is bigger than the other. If yours is loose you might have the earlier year factory locking gas cap. You would have to swap out the neck to an earlier neck. I know the wagon caps are particularly to the wagons as the 510 (non wagons) are smaller. The outside overall diameter. I've been known to be wrong sometimes but that's what I gathered. :) Greg Quote Link to comment
edekalil Posted August 5, 2017 Report Share Posted August 5, 2017 I got under there to look, I can only see one hose & its hard to get a measurement because it goes toward the drivers side & loops back towards the tank. That particular hose looks to be at least 30" long. The other I can't see, it's on top of the tank. Sorry man... I could of answered that question when I put the tank on, I just can't remember. Greg That's cool I understand, I have the original hose but I cu some of the end. Thanks for trying, I will gut if figured out. And that is a cool cap. 1 Quote Link to comment
mrbigtanker Posted August 6, 2017 Report Share Posted August 6, 2017 Great find Greg! Question for you...& anyone else that has one of these rare pieces...does it fit snuggly & securely? When I've put mine on, it seems like you could wiggle it off if you really tried. I remember a few years back that some turd stole one off someone's Dime at the Eagle Rock meet. Thanks, Angela I got a brand new NOS one and it fits snug like a bug in a rug. 1 Quote Link to comment
Redrumls Posted August 6, 2017 Report Share Posted August 6, 2017 I got a brand new NOS one and it fits snug like a bug in a rug.Post some pics of that bad boy! Greg Quote Link to comment
Big_E-Dog Posted August 6, 2017 Report Share Posted August 6, 2017 looking for a rear end with 3.7 final drive....whats my options with less work? mazda? or one from a newer truck? Quote Link to comment
edekalil Posted August 6, 2017 Report Share Posted August 6, 2017 I should soon get the Goon in this small garage out of the rain and weather soon. 2 Quote Link to comment
Redrumls Posted August 6, 2017 Report Share Posted August 6, 2017 I should soon get the Goon in this small garage out of the rain and weather soon. I wouldn't mind seeing some rain over here.... we just went through a streak of 100+ degree weather. Greg Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.