uberkevin Posted January 14, 2014 Author Report Share Posted January 14, 2014 I would do stacks the he'll with air cleaners. Show me something tanker would get if he had SUs. Quote Link to comment
mrbigtanker Posted January 14, 2014 Report Share Posted January 14, 2014 I would do a clean stack,I got some 51 or 52 mil ones now.all polished and looking good.but I am pretty sure there to big for those SU's you got there.I am trying to think on what thread I saw some one with stacks,more air and better sound I am sure. Quote Link to comment
uberkevin Posted January 14, 2014 Author Report Share Posted January 14, 2014 I was looking at a pair a while back but I can't find it either. I've got a few ideas flouting in this skull of mine for some nice stacks. Quote Link to comment
uberkevin Posted January 14, 2014 Author Report Share Posted January 14, 2014 Here we go like this guy did. I must say this looks amazing! Bottom of the page. http://community.ratsun.net/topic/29366-driving-a-car-that-has-velocity-stacks-horns/ Quote Link to comment
Cpl620 Posted January 14, 2014 Report Share Posted January 14, 2014 every time i see this thread title, i think of this song.... truck looks great man. i want those brakes. Quote Link to comment
uberkevin Posted January 27, 2014 Author Report Share Posted January 27, 2014 Nothing much just got bored and painted. And I'm dealing with a little noise. Quote Link to comment
mrbigtanker Posted January 28, 2014 Report Share Posted January 28, 2014 fix da pipe. Quote Link to comment
uberkevin Posted June 7, 2014 Author Report Share Posted June 7, 2014 then took it back apart to do this ARP everything.. u67 2 Quote Link to comment
uberkevin Posted July 10, 2014 Author Report Share Posted July 10, 2014 Put together a 5 speed. Quote Link to comment
uberkevin Posted July 10, 2014 Author Report Share Posted July 10, 2014 Also picked up a 520 one piece. Need some new u joints and I think change the yoke to an L yoke. And get it balanced. 1 Quote Link to comment
uberkevin Posted July 10, 2014 Author Report Share Posted July 10, 2014 Now this is a really nice page full of pictures. Quote Link to comment
uberkevin Posted July 24, 2014 Author Report Share Posted July 24, 2014 Test fitting oil cooler stuff. Wish I could have got Nissan stuff but this will work. Also got the one piece balanced. Ujoints changed as well. Picked up some redline gear oil for the new 'to me' 5 speed. Yellow metal safe. Quote Link to comment
uberkevin Posted July 24, 2014 Author Report Share Posted July 24, 2014 Oh and I thought I'd put some NPR's on the ka pistons. Quote Link to comment
4perrev Posted July 26, 2014 Report Share Posted July 26, 2014 Just kickin a$$ all over that truck aren't ya?! Looks good. Quote Link to comment
uberkevin Posted July 27, 2014 Author Report Share Posted July 27, 2014 Yeah man I'm getting everything ready.. fitting a few new bushings a new unripped motor mount. Mounting the new oil cooler. cleaned the bay.. Need to take care of some rust behind the masters that I'm not sure I'll get to tell I move.. Need to get new brake stuff for the rear. Looks like I haven't got time for the brake swap.. yet.. Quote Link to comment
4perrev Posted July 27, 2014 Report Share Posted July 27, 2014 No not yet, but I did get new tires for her and driving for the first time today! Starting work on the 510 now. Busy, busy! Quote Link to comment
uberkevin Posted August 4, 2014 Author Report Share Posted August 4, 2014 Waiting to be cleaned after new freeze plugs, reassemble block to spec after.. theeen put her in. Made hg with drilled holes, didn't forget the larger odd shaped rear hole.. Almost there guys an gals. 1 Quote Link to comment
uberkevin Posted August 6, 2014 Author Report Share Posted August 6, 2014 Needed to see if the one piece would work with the 720/L frontcase shorty trans I'm using..I decided to blot the trans where it needs to be and so on with the drive line. Bolted to the diff and could see that I need about 4 inchs or so.. seee. Quote Link to comment
4perrev Posted August 6, 2014 Report Share Posted August 6, 2014 That's what she said - only 4 more inches and you'll be right there! Quote Link to comment
uberkevin Posted August 11, 2014 Author Report Share Posted August 11, 2014 Fab for oil cooler mounting. 2 Quote Link to comment
uberkevin Posted August 11, 2014 Author Report Share Posted August 11, 2014 Did end up cutting a little more so I can move the cooler forward so it isn't touching the radiator... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.