Rustina 510 Posted July 18, 2012 Report Share Posted July 18, 2012 Cars lookin good skib. I love the 2dr 710s a sr20det would look nice in that engine bay. I agree but also a sr20det looks good in any engine bay Quote Link to comment
datzenmike Posted July 18, 2012 Report Share Posted July 18, 2012 hey skibert i happen to have a set of optional original 710 aluminum nissan wheels... i might be willing to let em go if youre interested and willing to pay or trade some other wheels I'm not aware there was an optional mag rim for the 710. It should have a Nissan part number cast into the outer rim edge. By all means post a picture of it. It could be mis-identified as being from a 710. Quote Link to comment
Skib Posted July 18, 2012 Author Report Share Posted July 18, 2012 Cars lookin good skib. I love the 2dr 710s a sr20det would look nice in that engine bay. I agree, Id love to do an SR20det or a KA24det down the road... ... with a 4 lug mustang rear with LSD and a 4 link ;) 1 Quote Link to comment
Zeusimo Posted July 18, 2012 Report Share Posted July 18, 2012 Mustang Rear End..? Doo Tell Quote Link to comment
Skib Posted July 18, 2012 Author Report Share Posted July 18, 2012 Mustang Rear End..? Doo Tell early mustangs are 4x114.3, LSDs a plenty for american shit and its prob close to the same size? see Z cars that are set up for drag do it. Quote Link to comment
Laecaon Posted July 18, 2012 Report Share Posted July 18, 2012 I am planning on using a Volvo 240 axle. Dana 30 differential, and supposedly only an inch wider than a 510 wagon axle. Just have to make sure it can be redrilled to 4x114.3 (volvo is 4x108). Quote Link to comment
Dguy210 Posted July 18, 2012 Report Share Posted July 18, 2012 hey skibert i happen to have a set of optional original 710 aluminum nissan wheels... i might be willing to let em go if youre interested and willing to pay or trade some other wheels I'm not aware there was an optional mag rim for the 710. It should have a Nissan part number cast into the outer rim edge. By all means post a picture of it. It could be mis-identified as being from a 710. Look like this? Quote Link to comment
Skib Posted July 18, 2012 Author Report Share Posted July 18, 2012 I am planning on using a Volvo 240 axle. Dana 30 differential, and supposedly only an inch wider than a 510 wagon axle. Just have to make sure it can be redrilled to 4x114.3 (volvo is 4x108). Im sure theres multiple options, havent looked into it to much. I dont really do solid axle stuff so plenty of research to do still and itl be a ways out anyway. Quote Link to comment
Abe Froman Posted July 18, 2012 Report Share Posted July 18, 2012 Look like this? I believe these are HL 510 option wheels, Quote Link to comment
Dguy210 Posted July 18, 2012 Report Share Posted July 18, 2012 I believe these are HL 510 option wheels, Wouldn't be surprised, I think they may have been a common dealer option. The earlier pic they were on a 710, I've also seen them on a B210, probably sold at the time the car was new. Sorry for the threadjack Skib :thumbup: , car looks awesome! Quote Link to comment
datzenmike Posted July 18, 2012 Report Share Posted July 18, 2012 I believe these are HL 510 option wheels, If they are, they are also available on the first gen 200sx and B210 too. The part number is usually cast into the outside edge of the rim so have a look. I think it's this number....#40300-N5825 Factory mags.... Mmmmmm Quote Link to comment
erichwaslike Posted July 18, 2012 Report Share Posted July 18, 2012 nope that aint them...... Quote Link to comment
erichwaslike Posted July 18, 2012 Report Share Posted July 18, 2012 ill look when i get home to see if they have a number. and i do have 5 of them. one was still in the nissan box..... i know it had a part number on the outside Quote Link to comment
Will Posted July 18, 2012 Report Share Posted July 18, 2012 ...I KNEW I'd seen these somewhere before. if not 710, they were at least a factory option for the sharknose 610-U. 1 Quote Link to comment
erichwaslike Posted July 18, 2012 Report Share Posted July 18, 2012 so what your telling me is i have a rare wheel in my hands? one with the factory nissan box..... score. i wont even say how much(little) i paid for em. Quote Link to comment
Will Posted July 18, 2012 Report Share Posted July 18, 2012 It's a Datsun! Everythin' is ultra-rare! They are very nice wheels though. Datsun was into mixing and matching parts between the different models in the 70's, so they might have appeared on other cars too. ...but they sure do look nice on the above car. ...or possibly the bamboo-colored 710 elsewhere in this thread. (and I just noticed that the 610-U brochure also shows the overhead console thing I was looking for a while back. That car got all the goodies.) so what your telling me is i have a rare wheel in my hands? one with the factory nissan box..... score. i wont even say how much(little) i paid for em. Quote Link to comment
erichwaslike Posted July 18, 2012 Report Share Posted July 18, 2012 you have no idea, i currently own 4 411s, i dove head first into some of the more rare cars out here, not necessarily sought after but rare and hard to find parts for. Quote Link to comment
Skib Posted July 18, 2012 Author Report Share Posted July 18, 2012 . ...or possibly the bamboo-colored 710 elsewhere in this thread. lol nope. stockers aint my style. Quote Link to comment
datzenmike Posted July 18, 2012 Report Share Posted July 18, 2012 nope that aint them...... Usually the Nisan part number is on them. Those look very much like the ones from an 810. #40300-U8925 Quote Link to comment
Abe Froman Posted July 18, 2012 Report Share Posted July 18, 2012 810 was what I was going to say also., I think they came on the 810 Coupe. Quote Link to comment
RedBanner Posted July 18, 2012 Report Share Posted July 18, 2012 A long time ago Ein a paint booth to far south to ever actuly want to go to....... just gotta get up to vancouver to get my glass and some other parts form RedBanner. the rest is just putting things together. Blah blah blah 710. Quote Link to comment
datzenmike Posted July 19, 2012 Report Share Posted July 19, 2012 Blah blah blah Datsun. Well Gilligan this is all your own fault if 710 parts start to dry up around there. Quote Link to comment
Farmer Joe Posted July 19, 2012 Report Share Posted July 19, 2012 lol im glad the blah blah blah caught on... looks really clean! Quote Link to comment
RedBanner Posted July 19, 2012 Report Share Posted July 19, 2012 they have round here lol, but ive come to terms with the fact 2 710s is more than any man could hope for as it is. And for years when i was all "710, 710 710 710" and even datsun guys would roll there eyes. Glad skib saw something to work with in his coupe, and it was actuly a burden off my back to know that all this coupe stuff would get such a good second chance. hoping the "good" parts i have dont look "turdish" when installed on such a clean car :lol: :lol: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.