Ranman72 Posted September 27, 2013 Report Share Posted September 27, 2013 Happy birthday MrBig and wayno really the same day how cool Quote Link to comment
wayno Posted September 27, 2013 Report Share Posted September 27, 2013 Really dude happy birthday Wayne. What about me. Happy birthday mrbigtanker :) Quote Link to comment
mrbigtanker Posted September 27, 2013 Author Report Share Posted September 27, 2013 Thanks Quote Link to comment
nis720 Posted September 27, 2013 Report Share Posted September 27, 2013 I don't see no freakin video yet.. What the hell is taking so long. The part you made failed :confused: I was getting no crank/cam signal, so I pulled out the puck and the shaft stayed in the block. Quote Link to comment
datrod Posted September 27, 2013 Report Share Posted September 27, 2013 Well that sucks. I didn't like the way I had to make it. Did it fuck the puck!!!! Quote Link to comment
datrod Posted September 27, 2013 Report Share Posted September 27, 2013 Well when you take the three nuts off the bottom of the puck the shaft is going to stay in the block. There is no way to make it stay on the shaft. If you remove the entire aluminum body and the shaft stays in the block, Then we have a problem. It's a bitch to get that little rubber deal to line up with the notch in the puck. If you don't get it right then it's not going to spin, No spin no spark. Quote Link to comment
nis720 Posted September 27, 2013 Report Share Posted September 27, 2013 Well that sucks. I didn't like the way I had to make it. Did it fuck the puck!!!! No.. the retaining ring popped off. The picture is the shaft with the snap ring on, seems like it's a bit too big and that's why it slipped of (might just need a smaller ring). I put it back together and it's working, but I'm not sure if it will hold up. The reason I had to take out the whole thing was because I wasn't getting cam/crank signal at all, so when I pulled off the EPM and your piece the shaft stayed in the block. I took the EPM off the block and got the retaining ring back on but it doesn't take too much force to slip it off. I was able to align the puck on the shaft with ease, not sure what your tired old eyes are talking about. B) Quote Link to comment
datrod Posted September 27, 2013 Report Share Posted September 27, 2013 Tired old eyes are going to watch me kick your ass. :rofl: Quote Link to comment
mrbigtanker Posted September 27, 2013 Author Report Share Posted September 27, 2013 Now now boys there will be no ass kicking at the one legged ass kicking event. Quote Link to comment
nis720 Posted September 27, 2013 Report Share Posted September 27, 2013 Last night tinkering with the AEM software. I narrowed it down to the EMS 4 having connectivity issue while cranking (noise). Quote Link to comment
mrbigtanker Posted September 27, 2013 Author Report Share Posted September 27, 2013 Nice big srceen,DUDE YOU GOT A DELL.hahahahahah Quote Link to comment
datrod Posted September 27, 2013 Report Share Posted September 27, 2013 Mo, Do you think the thing I made for the puck is the problem???? Quote Link to comment
datrod Posted September 27, 2013 Report Share Posted September 27, 2013 It could be if it's making noise. The needle bearings I used were a little loose on the fit. Quote Link to comment
nis720 Posted September 27, 2013 Report Share Posted September 27, 2013 It could be if it's making noise. The needle bearings I used were a little loose on the fit. I meant electrical noise (as in frequency). Something is causing the electrical signal for the USB to spike/feedback and lose connection (technical mambo jumbo). Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 well here it is. 1 Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 I love the new dash.dont mind the mess. 1 Quote Link to comment
bananahamuck Posted September 28, 2013 Report Share Posted September 28, 2013 Is there going to be a video for us long distance thread lurkers?? And a happy belated birthday to you ole timer.. B) 1 Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 Is there going to be a video for us long distance thread lurkers?? And a happy belated birthday to you ole timer.. B) Yes just some bullshit stuff. Quote Link to comment
skyblue Posted September 28, 2013 Report Share Posted September 28, 2013 meh...haha just kidding. that shit looks the business. if you can, do a driveby video. i want to see that bad boy in action. and happy late birthdau cuz! 1 Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 .I will try,lets gt it started and running first. :thumbup: Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 I got up early and finished a few small things now its up to 720customs to get er done.I am at work getting paid to surf ratbook or facesun.haha Quote Link to comment
Ranman72 Posted September 28, 2013 Report Share Posted September 28, 2013 get that rope ready just in case Quote Link to comment
mrbigtanker Posted September 28, 2013 Author Report Share Posted September 28, 2013 So good news first its alive and running.Bad news is dont have time to drive it down there with out giving some sort of test half ass run,and there is a possible leak in between the head and timing chain cover not sure could not see very well[and if thats the the worst of my worries then i am happy considering the factors.So as of 0045 in the morning the red truck is going in the green ones place.Moises did a bang up job trying to get it done on time but time was not on our side.Next year it will be even badder then it is now.Stay Tuned. :hyper: Quote Link to comment
nis720 Posted September 28, 2013 Report Share Posted September 28, 2013 It's felt like the truck has been fighting me all the way, but finally it breaths. There's some things that need to be adjusted and others that need to be fixed. Nothing major, but it's all the details that get you in the end. We decided it wouldn't be a good idea to drive it like. I'll post a vid up in a bit. Quote Link to comment
nis720 Posted September 28, 2013 Report Share Posted September 28, 2013 http://youtu.be/bMvQoWdYMds 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.