Eagle_Adam Posted December 7, 2013 Report Share Posted December 7, 2013 Mmmmmmm nips Quote Link to comment
SR20DETdatsun510 Posted April 1, 2014 Author Report Share Posted April 1, 2014 Psyc.... No updates...... Yet.But a sort of big wheel update soon...I miss my car :crying: Quote Link to comment
aintnobiscuit Posted April 1, 2014 Report Share Posted April 1, 2014 YOU DICK! I looked at my ratsun feed, saw the new title + bump and was like YES ZOMG! UPDATEZ!!!!!! and then there were no updates :sneaky: 1 Quote Link to comment
Rustbucket Posted April 1, 2014 Report Share Posted April 1, 2014 What's the word on this thing, man? I always check back hoping for running vids, haha! 1 Quote Link to comment
andrewschotke Posted April 2, 2014 Report Share Posted April 2, 2014 i just read all 49 pages of this ....... still wanting more.....i hate blue balls -_- . Whats the wheel update? 2 Quote Link to comment
SR20DETdatsun510 Posted April 2, 2014 Author Report Share Posted April 2, 2014 YOU DICK! I looked at my ratsun feed, saw the new title + bump and was like YES ZOMG! UPDATEZ!!!!!! and then there were no updates :sneaky: I know, I feel like a dick. Even more so, I feel like theres a huge hole in me. (Vagina jokes ensue) I haven't driven my Datsun for almost 2 years. And even before that I was having all sorts of problems and Couldn't drive it consistently. So I fill the big hole with wheels and other goodness.... (more vagina jokes) lol What's the word on this thing, man? I always check back hoping for running vids, haha! I hope to have it running by JCCS 2014 but who knows, the way things have been going I wouldn't be surprised if there was another huge setback in the near future. Lol But I am trying i just read all 49 pages of this ....... still wanting more.....i hate blue balls :sleep: . Whats the wheel update? Thanks man, can you imagine the case of blue balls I have?! Hahaha I gotta see her sexy ass everyday without being able ride her. It's like one if those masterson booths, look but no touch! Lmao Thats should be her middle name Dat-Blue Balls-Tsunami ! Lolol I'll post up the wheel updates a little later. Subscribe and get updates, i'm not quitting the build anytime soon.... 2 Quote Link to comment
SR20DETdatsun510 Posted April 2, 2014 Author Report Share Posted April 2, 2014 By Sheer Luck, I found and popped on some Super Sweet Wheel Porn Goodness. Highly sought after and super rare accessorys for my Impul Pro Mesh. Aero Covers! I have been looking for these for 2 years and were the Holy Grail to completing my set. (i will post actual pics when I take them) From these... With These... Into These..... 1 Quote Link to comment
andrewschotke Posted April 3, 2014 Report Share Posted April 3, 2014 yaaaaaaaa....use those wheels.....then give me those longchamps .....honestly my favorite jdm wheel .....except i want a 10j and a very negative offset :hyper: 1 Quote Link to comment
andrewschotke Posted April 3, 2014 Report Share Posted April 3, 2014 http://page5.auctions.yahoo.co.jp/jp/auction/e147872691 http://page4.auctions.yahoo.co.jp/jp/auction/d148575370 http://page18.auctions.yahoo.co.jp/jp/auction/w99299335 http://page16.auctions.yahoo.co.jp/jp/auction/u53226523 http://page14.auctions.yahoo.co.jp/jp/auction/s365391964 oh you know....just some wheel porn #4 is my favorite ^_^ 1 Quote Link to comment
SSSEXXX Posted April 4, 2014 Report Share Posted April 4, 2014 Love the build man. I have learned a lot from you and will be, hopefully, doing a lot of the same engine work myself soon too. The work you have done intimidates me though. I'm so technically behind you that taking it all in seems overwhelming. One thing that I can't believe is that no one has found a fuel cell that mounts in the stock location as of yet. Keep the updated coming buddy!! 1 Quote Link to comment
Rustbucket Posted April 4, 2014 Report Share Posted April 4, 2014 Damn, those covers are a good look! Jamel at Final Heaven hook you up with those by any chance? Quote Link to comment
SR20DETdatsun510 Posted April 5, 2014 Author Report Share Posted April 5, 2014 Love the build man. I have learned a lot from you and will be, hopefully, doing a lot of the same engine work myself soon too. The work you have done intimidates me though. I'm so technically behind you that taking it all in seems overwhelming. One thing that I can't believe is that no one has found a fuel cell that mounts in the stock location as of yet. Keep the updated coming buddy!! Believe me, I am not THAT tech savvy. If I can do it, YOU can do it mang! But thanks, I am really trying to keep this going. It's hard at time cause "Life" gets in the way. Damn, those covers are a good look! Jamel at Final Heaven hook you up with those by any chance? No, Got them off a buddy Mike. Quote Link to comment
Ranman72 Posted April 5, 2014 Report Share Posted April 5, 2014 get er done we miss it too 1 Quote Link to comment
SR20DETdatsun510 Posted May 24, 2014 Author Report Share Posted May 24, 2014 Working on the Dato this weekend. Hopefully i can get some things done that need to be done in order for me to trailer it to get the Cold pipe fabbed. Spoolin' Phil is going to do it. Going to be sexy I hope. Then Off to Tech3 to get some wiring checked out and a few other things. Then hopefully start up and then tune ;) Will be a little while till all of this transpires tho. Git 'er done! 3 Quote Link to comment
aintnobiscuit Posted May 27, 2014 Report Share Posted May 27, 2014 YEEEESSSSSSSS!!!!!! Quote Link to comment
solo Posted May 27, 2014 Report Share Posted May 27, 2014 Working on the Dato this weekend. Hopefully i can get some things done that need to be done in order for me to trailer it to get the Cold pipe fabbed. Spoolin' Phil is going to do it. Going to be sexy I hope. Then Off to Tech3 to get some wiring checked out and a few other things. Then hopefully start up and then tune ;) Will be a little while till all of this transpires tho. Git 'er done! Hey man I know we don't know each other but if you ever need help just give me a holler. I live out in Pleasanton I can hop on Vasco road to get to you in about 40 min. Quote Link to comment
SR20DETdatsun510 Posted May 27, 2014 Author Report Share Posted May 27, 2014 Hey man I know we don't know each other but if you ever need help just give me a holler. I live out in Pleasanton I can hop on Vasco road to get to you in about 40 min. Hey, Thanks Solo, Might take you up on that offer sometime. I am almost done with what I need to do and then Datsunami is off to the shop. We should meet up sometime tho. Since summer and better whether is almost here again, we will start up the Brentwood/Antioch meets again. And there are Tracy and South Bay Meets too. Believe me, I will be at all of them. I am going to drive the fuck out this bish once I get her running good! 1 Quote Link to comment
SR20DETdatsun510 Posted May 27, 2014 Author Report Share Posted May 27, 2014 So I have all weekend (well, the latter half of Saturday, all of Sunday and Monday morning) to do some much needed work and procure some needed stuff. I dry fitted my custom Fuel tube. Already got the 2.25" fuel coupler and clamps for it.Just need to get an AN fitting for the vapor return. Which I have a question about. My vapor tank is deleted and I have a Z32 intank pump mod. Do I need a breather of some kind? Or does the fuel system like to see a vacuum? If yes, where and how do I add the breather.Remember I have a surge tanks and 2 fuel pumps.Here's a pic of the Filler Tube. It's a prototype and needs a little adjustment.And I still have to remove it and polish it up.... Quote Link to comment
SR20DETdatsun510 Posted May 27, 2014 Author Report Share Posted May 27, 2014 I also finally got around to the throttle cable bracket. Need throttle right? LOLOL So I had my brother machine a rough bracket that I had to "fine tune." I had to shave an angle on the side so that it would face the pulley at a perpendicular angle. My fingers and hands still hurt from it. Then I had drill a mounting hole and slot it for the cable mounting. I don't have a grinder so I had to file it all down. What a bitch all that was. THEN I don't have a proper bench polisher so I have to make due with my cordless. Mounted it in my bench vice and went to town on the bracket. Turned out pretty nice. And it is dead on with the pulley now! 1 Quote Link to comment
SR20DETdatsun510 Posted May 27, 2014 Author Report Share Posted May 27, 2014 I am also in the process of making some extension harness for a couple of my gauges. I need to move 2 of them to a different location. It was a bitch finding the right P/n for the connector housings and pins but after a week of searching, I found what I needed and procured them. 1 Quote Link to comment
solo Posted May 27, 2014 Report Share Posted May 27, 2014 Hey, Thanks Solo, Might take you up on that offer sometime. I am almost done with what I need to do and then Datsunami is off to the shop. We should meet up sometime tho. Since summer and better whether is almost here again, we will start up the Brentwood/Antioch meets again. And there are Tracy and South Bay Meets too. Believe me, I will be at all of them. I am going to drive the fuck out this bish once I get her running good! Sounds good man. Im down to help when ever. 1 Quote Link to comment
aintnobiscuit Posted May 28, 2014 Report Share Posted May 28, 2014 Nice work! That pulley looks very nice :) 1 Quote Link to comment
SR20DETdatsun510 Posted May 29, 2014 Author Report Share Posted May 29, 2014 Hey all, had an un-answered question, My vapor tank is deleted and I have a Z32 intank pump mod with a walbro 255, I have an external bosch 044. Do I need a breather of some kind? Or does the fuel system like to see a vacuum? If yes, where and how do I add the breather. Remember I have a surge tanks and 2 fuel pumps. Thanks Quote Link to comment
SR20DETdatsun510 Posted May 29, 2014 Author Report Share Posted May 29, 2014 Double post Quote Link to comment
q-tip Posted May 29, 2014 Report Share Posted May 29, 2014 It has to vent somehow. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.