datsunfreak Posted March 13, 2014 Report Share Posted March 13, 2014 I've been wanting fender mirrors for a while, havent found anything I liked though. But maybe I'll get this style. Seen these on a couple of 620s. they looked very good. And they are relatively inexpensive also. ;) http://www.mooneyesusa.com/product-p/gt001.htm Quote Link to comment
ohmrchristopher Posted March 14, 2014 Report Share Posted March 14, 2014 Sick sick! They are very similar to the GC10 mirrors I dream about. Gahh, $45 vs $520 lol Quote Link to comment
datsunfreak Posted March 14, 2014 Report Share Posted March 14, 2014 Like them slightly less now that I see them on the truck, but I think he just didn't put them far enough back maybe? Quote Link to comment
ohmrchristopher Posted March 14, 2014 Report Share Posted March 14, 2014 Dawa has a FSM scan of where to install the mirrors. I have it saved at home but im at work now. Maybe message him and see. I can never seem to find the fender mirror forum lol Quote Link to comment
datsunfreak Posted March 14, 2014 Report Share Posted March 14, 2014 Dawa has a FSM scan of where to install the mirrors. If it's anything like the 1200, 510, 610, B210 or 210 (maybe others), the factory probably made a small divot in the upper "frame rail" behind the fender where it's supposed to go. :thumbup: You can sort of see it here (on a 510 for reference)... My concern on that truck is I think i t might look better further back on the "flat" portion of the fender and not partially on the curved bit? Quote Link to comment
ohmrchristopher Posted March 14, 2014 Report Share Posted March 14, 2014 That curve has done me in a few times. I bought flush hood latches but the hood curves right at the radiator support where i would have to install them. Quote Link to comment
datsunfreak Posted March 14, 2014 Report Share Posted March 14, 2014 Yeah, never seen hood pins work perfectly well on a 620 either... :rofl: Quote Link to comment
datzenmike Posted March 14, 2014 Report Share Posted March 14, 2014 Fuck hood pins. No one needs them. Datsuns don't go fast enough. 2 Quote Link to comment
datsunfreak Posted March 14, 2014 Report Share Posted March 14, 2014 Fuck hood pins. No one needs them. Datsuns don't go fast enough. Not about speed. About shitty factory hood latches. :rofl: Quote Link to comment
ohmrchristopher Posted March 14, 2014 Report Share Posted March 14, 2014 Bit of both haha. I like how Mike just comes flying in with a legit but mildly shocking comment. Side note, heard there are 3 datsuns at the local JY. Time to get pickin!! Quote Link to comment
datzenmike Posted March 14, 2014 Report Share Posted March 14, 2014 Not about speed. About shitty factory hood latches. :rofl: They work fine if greased, adjusted and looked after. My beef with pins is punching holes in the body... a big no no with me. Next is the terrible looks. Quote Link to comment
datsunfreak Posted March 14, 2014 Report Share Posted March 14, 2014 My beef with pins is punching holes in the body... a big no no with me. Next is the terrible looks. Well, in my defense, every car I've owned with hood pins already had them when I got it... :rofl: Quote Link to comment
ohmrchristopher Posted March 14, 2014 Report Share Posted March 14, 2014 Well, in my defense, every car I've owned with hood pins already had them when I got it... :rofl: You know, there are more cars outside the trailer park. You dont have to "keep it in the family" Quote Link to comment
75LB620PU Posted March 14, 2014 Report Share Posted March 14, 2014 IMAG0123 by warrenchris90, on Flickr IMAG0120[1] by warrenchris90, on Flickr IMAG0119[1] by warrenchris90, on Flickr 2012-10-28_13-24-23_437 by warrenchris90, on Flickr 2 Quote Link to comment
collision and customs Posted March 15, 2014 Report Share Posted March 15, 2014 BRIGHT! People move out of the way when I'm behind them on I5. And it casts perfect image shadows of their cars on the big exit signs. 3 Quote Link to comment
datzenmike Posted March 15, 2014 Report Share Posted March 15, 2014 BRIGHT! People move out of the way when I'm behind them on I5. And it casts perfect image shadows of their cars on the big exit signs. They shouldn't. They should have a horizontal cut off line. I hate drivers that have extra lights and use them when they don't need them. It's discourteous to drive around other drivers like that. 5 Quote Link to comment
bonvo Posted March 18, 2014 Report Share Posted March 18, 2014 well i have joined the 620 club not sure if ill keep it or sell it at this point we shall see 1 Quote Link to comment
Radim Posted March 19, 2014 Report Share Posted March 19, 2014 Those moon mirrors are the same ones I've had for a couple of years, and they suck to be honest, The passenger side glass portion fell off on a bump, and concern for the driver's falling off made get jbweld the shit out of it. 1 Quote Link to comment
ohmrchristopher Posted March 19, 2014 Report Share Posted March 19, 2014 so much learning! Quote Link to comment
ohmrchristopher Posted March 26, 2014 Report Share Posted March 26, 2014 Further question, regular ZG or WIDE ZG flares? Thats my thought. ZG Wide ZG Flares To flare or not to flare.......... Quote Link to comment
paisa13 Posted March 26, 2014 Report Share Posted March 26, 2014 Paisa... I'm really wishing I hadn't seen your pics...actually very close to what I would be going for I love how it looks, and its already in my color scheme... I would use the take-offs from my Tacoma in 18" with Tires off of a Lotus Evora This is my Taco And it has Lifetime LED high/low LED beams and HID fogs, and all of my cars and motorcycles match the scheme. This is my ultimate Datsun Truck idol and my buddy has a 510 wagon... I need to get pics It took me a while to make up my mind on the color! Ive always been into the darker shades, love the Eleanor gt500 charcoal and that 1200 was also my truck idol and inspiration. Love your Tacoma btw :thumbup: Quote Link to comment
paisa13 Posted March 26, 2014 Report Share Posted March 26, 2014 Further question, regular ZG or WIDE ZG flares? Thats my thought. ZG Wide ZG Flares Still havent got the guts to cut up my fenders but i am leaning toward the ZGs Quote Link to comment
angelomedallas Posted March 26, 2014 Report Share Posted March 26, 2014 Got it just 2 weeks ago 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.