skunk Posted April 18, 2011 Author Report Share Posted April 18, 2011 Why am I the last to hear about this need? Gentlemen, what happened to the parts circle? WHAT!?!? i called you about the passenger side marker before i even had the 610, because i knew it was missing before i got it. Quote Link to comment
zerow Posted April 18, 2011 Report Share Posted April 18, 2011 WHAT!?!? i called you about the passenger side marker before i even had the 610, because i knew it was missing before i got it. I thought you needed an early one, not a later one...okay, my bad...i will keep the hunt going for a later side maker light... Quote Link to comment
skunk Posted April 22, 2011 Author Report Share Posted April 22, 2011 starting to make a list and pile up some parts. need water pump, timing gear set, gas tank sealer, IR alt, El dizzy, new coil, head gasket kit, oil pan gasket, ka oil pump, L16 lower Rad inlet, 510/610 Clutch Master Cylinder, long tail 5 speed. might need to pick up a new rad if i cant fix the one thats in there now. the top tank is spiting from the rest of the rad. i know theres more lol. maybe a new cam if i can find one for a deal. oh and 280zx front struts but all the engine stuff comes first. Quote Link to comment
datzenmike Posted April 22, 2011 Report Share Posted April 22, 2011 710 engine parts will fit. :lol: Quote Link to comment
skunk Posted April 22, 2011 Author Report Share Posted April 22, 2011 710 engine parts will fit. :lol: yeah, so will alot of other Datsun engine parts :rolleyes: some parts will be used, some will be new. the whole front half of my engine is RTVed like a mother fucker. iv got little bits of RTV floating around inside my rad. so yeah i need to re do a bunch of the gaskets, Quote Link to comment
datzenmike Posted April 22, 2011 Report Share Posted April 22, 2011 I meant that jess has the parts. :) Your 610 must have been previously owned by a chevy owner. Those guys can't afford gaskets. 1 Quote Link to comment
nismo dr Posted April 22, 2011 Report Share Posted April 22, 2011 Your 610 must have been previously owned by a chevy owner. Those guys can't afford gaskets. :lol: Quote Link to comment
Jassifrass Posted April 22, 2011 Report Share Posted April 22, 2011 710 engine parts will fit. :lol: :lol: your funny Quote Link to comment
bonvo Posted April 22, 2011 Report Share Posted April 22, 2011 take the rad out and take a propane torch to it then solder Quote Link to comment
MicroMachinery Posted April 23, 2011 Report Share Posted April 23, 2011 Your 610 must have been previously owned by a chevy owner. Those guys can't afford gaskets. You nailed it. The guy I got it from that had taken the timing cover off was all about the Bow Ties. You should have seen how many boogers came out when I reverse flushed the oil system. Disgusting. Quote Link to comment
datzenmike Posted April 23, 2011 Report Share Posted April 23, 2011 Orange or blue boogers? How I hate RTV. Go into any wrecking yard and look at a chevy 305. It'll have red bird shit rtv all over the intake. Quote Link to comment
skunk Posted April 23, 2011 Author Report Share Posted April 23, 2011 all orange Quote Link to comment
Skib Posted April 23, 2011 Report Share Posted April 23, 2011 its everywhere :mellow: Quote Link to comment
bonvo Posted April 23, 2011 Report Share Posted April 23, 2011 i see alot of scraping in your future skunk Quote Link to comment
skunk Posted April 25, 2011 Author Report Share Posted April 25, 2011 yeah, i know. im hoping to rent out a friends garage for a long weekend and getting a shit ton of work done at once. I'll just buy a bunch a beer and see who shows up to help work on the 610 for a weekend, keep the grill going all day too. :D on the top of the list is cleaning up the timing cover, new water pump, timing chain/gear/tensioner. And getting the emissions crap all out, and installing my SU carbs. if i can, id like a new oil pump, el dizzy and a new cam. but we will see what kind om moneys i have. Quote Link to comment
Guest DatsuNoob Posted April 25, 2011 Report Share Posted April 25, 2011 I have a spare used KA oil pump. It's nothing special, but it does work and is an original factory pump. I pulled it off a Frontier KA with 78k on the clock. You pay the shipping, buy me a beer next time I see ya, and it's yours. Quote Link to comment
skunk Posted April 25, 2011 Author Report Share Posted April 25, 2011 nice, let me know what shipping will be. And ill take care of it. Quote Link to comment
Guest DatsuNoob Posted April 25, 2011 Report Share Posted April 25, 2011 Oh yeah, same pump as any L28 too. Quote Link to comment
Guest DatsuNoob Posted April 25, 2011 Report Share Posted April 25, 2011 It's a heavy little bastard. Probably looking at $15 or so. I'll have to ziploc that shit so it'll pass a sniffer test. Quote Link to comment
Skib Posted April 25, 2011 Report Share Posted April 25, 2011 Oh yeah, same pump as any L28 too. KA pump is a higher output pump than an L28e but its about the same an L28et pump Quote Link to comment
bonvo Posted April 25, 2011 Report Share Posted April 25, 2011 yeah, i know. im hoping to rent out a friends garage for a long weekend and getting a shit ton of work done at once. I'll just buy a bunch a beer and see who shows up to help work on the 610 for a weekend, keep the grill going all day too. :D on the top of the list is cleaning up the timing cover, new water pump, timing chain/gear/tensioner. And getting the emissions crap all out, and installing my SU carbs. if i can, id like a new oil pump, el dizzy and a new cam. but we will see what kind om moneys i have. wish i could get in on that man it would be creepy working on shellys twin im hoping to see this thing once i move up to oregon Quote Link to comment
skunk Posted April 25, 2011 Author Report Share Posted April 25, 2011 wish i could get in on that man it would be creepy working on shellys twin im hoping to see this thing once i move up to oregon dont worry, the 610 has lots of work i want to get done. Ill let you work on her. lol Quote Link to comment
bonvo Posted April 26, 2011 Report Share Posted April 26, 2011 sounds like a plan to me Quote Link to comment
skunk Posted May 3, 2011 Author Report Share Posted May 3, 2011 My engine is starting to Knock..... its the bottom end. took the valve cover off, every thing seems ok up top. But there is still alot of noise. looking like i just might not make it to canby with my datsun again :angry: Quote Link to comment
Pumpkn210 Posted May 3, 2011 Report Share Posted May 3, 2011 Theres got to be a way to get it there under its own power! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.