Rustina 510 Posted March 29, 2012 Report Share Posted March 29, 2012 Ouch... At least you already have replacements Quote Link to comment
DISLEXICDIME Posted March 29, 2012 Author Report Share Posted March 29, 2012 yah i almost bought replacements but free is better then $260 Quote Link to comment
Sinnful Posted March 29, 2012 Report Share Posted March 29, 2012 yeah I need to do the exhaust tunnel thing also in my car Quote Link to comment
DISLEXICDIME Posted April 5, 2012 Author Report Share Posted April 5, 2012 well i got the sound deadening off. had to use solvent a scraper and a heated pressure washer.. driver side then i went and picked up the cricket lol I have not driven my 720 in a while the suspension is gone. the weight from the big bottle of argon and the welder maid it ride all scary. and it does not help that there is a lot of play in the steering wheel. yay another datsun to fix Quote Link to comment
DISLEXICDIME Posted April 6, 2012 Author Report Share Posted April 6, 2012 ohh the pain of hours worth of wire wheeling . got my exhaust tunnel piping today woowhoo! Quote Link to comment
Sinnful Posted April 6, 2012 Report Share Posted April 6, 2012 good,now come do mine Quote Link to comment
philcas1987 Posted April 6, 2012 Report Share Posted April 6, 2012 the cricket huh... not going to be fun i can manage. i have a feeling were going to cutting more out than expected haha. john told me about a little mod he does. i just remembered. 1x2 square tubing along the rockers. butted up against the rocker and floor pan. ideas... Quote Link to comment
Sinnful Posted April 6, 2012 Report Share Posted April 6, 2012 Im going to do the rectangular tubing on my car for one to help tighten everything yep and for two it will be a good to mount the cage when i finally build one Quote Link to comment
DISLEXICDIME Posted April 6, 2012 Author Report Share Posted April 6, 2012 Yah I have always wanted to do the added tube in the rocker. Maybe we should have cut eat to west and further up the fire wall Quote Link to comment
DISLEXICDIME Posted April 7, 2012 Author Report Share Posted April 7, 2012 phil hard at work Quote Link to comment
Rustina 510 Posted April 7, 2012 Report Share Posted April 7, 2012 Oh dang. Looks like my 300$ 2 door 510 pans Quote Link to comment
DISLEXICDIME Posted April 14, 2012 Author Report Share Posted April 14, 2012 started the day off with a relaxing day getting a skin tightening mud bath at my private spa Then I snagged this out of Shaun's ae86 a little more trimming and some of phil's welding skills and the driver side floor will be done. Quote Link to comment
Rustina 510 Posted April 14, 2012 Report Share Posted April 14, 2012 Hahahaha nice dude. Now go get that dime fixed. Quote Link to comment
The Dat-side Posted April 17, 2012 Report Share Posted April 17, 2012 Does Phil need 510s to work in that badly? I got one. Quote Link to comment
Rustina 510 Posted April 17, 2012 Report Share Posted April 17, 2012 Yeah Phil come weld for me too!!! Quote Link to comment
DISLEXICDIME Posted April 17, 2012 Author Report Share Posted April 17, 2012 He said he will never do it again and he doughts any one would pay him it is a lot of work. Quote Link to comment
Rustina 510 Posted April 17, 2012 Report Share Posted April 17, 2012 Actually I don't need pans. I need body welding on my rear driver wheel well. Quote Link to comment
dennis Posted April 17, 2012 Report Share Posted April 17, 2012 nice, I like what is going on here. I might have to copy and tuck my exhaust up too. Have anyone heard of any excessive hot floors doing this mod? Jeff (icehouse)? bueller? bueller? I was thinking tucking it and then routing it out the drivers side under what would be my rear doors. Quote Link to comment
DISLEXICDIME Posted April 17, 2012 Author Report Share Posted April 17, 2012 I always wanted to mount it so the exhast exited the panel below the side window in front of the tire down by the rocker. I amgoing wrap my exhaust if it is to warm and dyno mat the floor. I might lizard skin the tunnel. Quote Link to comment
DISLEXICDIME Posted April 17, 2012 Author Report Share Posted April 17, 2012 Thanks for the tranny tunnel idea jeff. And thanks phil for being awsome! Quote Link to comment
philcas1987 Posted April 19, 2012 Report Share Posted April 19, 2012 Does Phil need 510s to work in that badly? I got one. i work on all of them as long as they are 510's Yeah Phil come weld for me too!!! if we make a deal you need to follow through! nice, I like what is going on here. I might have to copy and tuck my exhaust up too. Have anyone heard of any excessive hot floors doing this mod? Jeff (icehouse)? bueller? bueller? I was thinking tucking it and then routing it out the drivers side under what would be my rear doors. if you think about it the exhaust has the same clearance to the tunnel as it would to a regular floor pan. i cant think why it would be way hotter. maybe a little warmer. as it doesnt have full air flow. lots of pros one con. i will say this floor pans and the tunnel are a ton of work. you guys are going to kill me. its all in trade for bmw e30 parts haha Quote Link to comment
DISLEXICDIME Posted April 24, 2012 Author Report Share Posted April 24, 2012 Any one have a pair of lca nuts the nuts that hold the lca to the c member mine are toast. or does ant one know the part number for the lca nut's Quote Link to comment
slodat Posted April 24, 2012 Report Share Posted April 24, 2012 I have a set. Come get them... the nuts.. Quote Link to comment
DISLEXICDIME Posted April 26, 2012 Author Report Share Posted April 26, 2012 Floors out Picked up a passanger front floor pan from cris because the pan I had was to thin. Phill got the rear pan in while I stripped the tar mat off the pan from criss Rock that welder phil Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.