Nines Posted June 20, 2010 Report Share Posted June 20, 2010 Anyone know how to get a hold of DGR Fab? I emailed him today but it got returned. My project has been dormant for about a year due to funds! I'm trying to get rolling again. I can't find their website online either. Is he still in business? Quote Link to comment
72SR510 Posted June 20, 2010 Report Share Posted June 20, 2010 There have been a couple of guys that have been dissatisfied with his work! I saw an SR wire up he did and it was HORRIBLE!!! it was so bad it had to be re-wired!! So watch out!! I would try Troy Ermish instead! 1 Quote Link to comment
Burabuda Posted June 20, 2010 Report Share Posted June 20, 2010 There have been a couple of guys that have been dissatisfied with his work! I saw an SR wire up he did and it was HORRIBLE!!! it was so bad it had to be re-wired!! So watch out!! I would try Troy Ermish instead! so are you one of troy's lackeys? Quote Link to comment
thisismatt Posted June 21, 2010 Report Share Posted June 21, 2010 so are you one of troy's lackeys? I don't know Troy or DGR but I've seen enough crappy work/installs/service by DGR to know not to trust them with any of my money. Quote Link to comment
Skib Posted June 21, 2010 Report Share Posted June 21, 2010 so are you one of troy's lackeys? really? guys giving his opinion. if youv got an experience on the subject feel free to share too. but dont go starting any flamewar bullshit. Quote Link to comment
rustrocket Posted June 21, 2010 Report Share Posted June 21, 2010 Dan is a straight up guy if you ask me. He built the tube chassis for my triumph and was super chill to deal with. the number of his newer shop in RWC is 650 995 7685 Quote Link to comment
inline4 Posted June 21, 2010 Report Share Posted June 21, 2010 I think either guys are fine when it comes to parts. I suppose when it comes to installation that might be a different story, as each person has their own opine on what quality work they should get for their money. I can't chime in there as I've only ever bought parts from both Troy and dan, never installs. Dan doesn't do any of the wiring jobs that I am aware of. He subcontracts that work to Danny Youngs. Troy doesn't do wiring either. When it comes to labor like body and stuff you gotta remember both contract that work out. Like I said. It all depends on what you're purchasing Quote Link to comment
dimedude Posted June 21, 2010 Report Share Posted June 21, 2010 both Dan and Daniel do really clean work and i have been very happy with the work they have done for me,if your doing a swap id go to DGR they know their stuff Quote Link to comment
sssr20det510 Posted June 21, 2010 Report Share Posted June 21, 2010 If your in everett just have jeff and frank do it there up by seattle, jeff does troys wiring Quote Link to comment
72SR510 Posted June 21, 2010 Report Share Posted June 21, 2010 so are you one of troy's lackeys? No I don't even know Troy!! But hear nothing but good things about him! Heard about his work and seen it... Same for DGR except the opposite of good work!! Opinions vary but ask around and decide for yourself... 1 Quote Link to comment
exit64 Posted June 21, 2010 Report Share Posted June 21, 2010 I bought my SR20 for the 67.5 Roadster from Dan. Great guy to deal with in that respect. I got what I paid for and the transaction was flawless. Quote Link to comment
Creepy Cruiser Posted June 21, 2010 Report Share Posted June 21, 2010 I bought both of my front KA sway bars from Dan at DGR, and had a great experience. He sent me tons great info, before I even said I was going to buy them from him. I'd buy parts from him again, no problem. (just my opinion though) Quote Link to comment
Nines Posted June 21, 2010 Author Report Share Posted June 21, 2010 If your in everett just have jeff and frank do it there up by seattle, jeff does troys wiring I like the idea of local help. I'll obviously pay, what are their names on the board here? Quote Link to comment
Nines Posted June 21, 2010 Author Report Share Posted June 21, 2010 There have been a couple of guys that have been dissatisfied with his work! I saw an SR wire up he did and it was HORRIBLE!!! it was so bad it had to be re-wired!! So watch out!! I would try Troy Ermish instead! Thanks.... I had no idea Troy Ermish did that type of thing through his shop. I know all about the parts he sells, I plan on buying the coil over kit and the wilwood kit, eventually. I need the coilovers because I installed the Datsport SR kit and it kicks out the camber somethin fierce! Quote Link to comment
]2eDeYe Posted June 21, 2010 Report Share Posted June 21, 2010 Jeff is Icehouse here on the forums. Not sure if Frank is on here as a member or not, I know he looks at the pretty pictures sometimes. :lol: Jeff can get ahold of Frank though. Quote Link to comment
zhiguli510 Posted June 21, 2010 Report Share Posted June 21, 2010 There have been a couple of guys that have been dissatisfied with his work! I saw an SR wire up he did and it was HORRIBLE!!! it was so bad it had to be re-wired!! So watch out!! I would try Troy Ermish instead! I had good experiences with Dan and Troy. Troy did a 2.2LZ a few years back, Dan did an SR a year ago. Both were great to deal with and never had any problems with parts, install or customer service. Also, I heard Dan is not trying to work on datsuns cause of all the people that flake on paying but thats another story/thread Quote Link to comment
Skib Posted June 21, 2010 Report Share Posted June 21, 2010 2eDeYe' date='21 June 2010 - 07:24 AM' timestamp='1277130288' post='317073']Jeff is Icehouse here on the forums. Not sure if Frank is on here as a member or not, I know he looks at the pretty pictures sometimes. :lol: Jeff can get ahold of Frank though. Ya Franks not on here... "dosent do computers" rad dude tho! Id deff leave any of my dattos in the more than capable hands of Jeff and Frank Quote Link to comment
clean71 Posted June 22, 2010 Report Share Posted June 22, 2010 if you want clean work and the best ,go through Garageautohero (ray) 425-931-3121 Quote Link to comment
SRSANDS Posted June 22, 2010 Report Share Posted June 22, 2010 If your in everett just have jeff and frank do it there up by seattle, jeff does troys wiring Hmm jeff wires for troy emerish???/ How does that work Jeffs in Everett/Seattle and troys in cali im cornfused Quote Link to comment
SRSANDS Posted June 22, 2010 Report Share Posted June 22, 2010 If your in everett just have jeff and frank do it there up by seattle, jeff does troys wiring Hmm jeff wires for troy emerish??? How does that work Jeffs in Everett/Seattle and troys in cali im cornfused Quote Link to comment
Enjride Posted June 22, 2010 Report Share Posted June 22, 2010 Icehouse,did my wireing and it is awsome!! Quote Link to comment
sssr20det510 Posted June 22, 2010 Report Share Posted June 22, 2010 Hmm jeff wires for troy emerish??? How does that work Jeffs in Everett/Seattle and troys in cali im cornfused troy sends jeff the harness, jeff wires it all up so its plug and play and sends it back. he is doing a ka harness for him right now Quote Link to comment
]2eDeYe Posted June 22, 2010 Report Share Posted June 22, 2010 Icehouse,did my wireing and it is awsome!! X2 :D Quote Link to comment
Icehouse Posted June 22, 2010 Report Share Posted June 22, 2010 I've done a few KA wiring harnesses for Troy. He does all the other wiring he just doesn't do the EFI stuff. Quote Link to comment
DARIN 510 Posted June 24, 2010 Report Share Posted June 24, 2010 Dan at DGR has moved on to the big money customers.Has anyone seen the Lexis,I don't blame for moving on to high dollar projects.I have had a couple people tell me about Danny's wiring,and those where the people that had there 510s wired by Danny. http://farm5.static.flickr.com/4063/4239270605_30ebc0f7ed_o.jpg Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.