Z-train

Call around & find a reputable shop that cleans thems

CAREFULL!!!!Odds are other years are not the same.For my 77 810 there are FOUR DIFFERENT computers from the factory

I've been using MSD stuff on everything possible for 30 years.A 6AL box is driving my LZ-23.But electricity has it's own laws.When the voltage reaches"X",it's going to jump the gap-it doesn't matter wether the coil puts out 50K or 30 K.Spark is spark. MSD makes some good products as i've stated,but if your system is dead nuts on MSD anything will do nothing in the way of adding HP.BUt a MSD box with a rev limiter is very cheap insurance.

Drop the fuel tank and douche it out replace ALL rubber in the fuel system install a 60 psi guage betweeen the filter & the rail,this will confirm/debunk a whole shit pot full of issues power to the FP is supplied ONLY when the motor is cranking or running.No oil pressure inter-connect. Injectors can be cleaned & flowed for $17.00 a piece.Don't forget the CSI. Deoxit on ALL connectors under the hood AND the computer remove,clean & verify function of the thermotime switch and the coolant temp switch The FSM in MANDATORY for chasing these issues.

That means something was wrong with the old set-up.

Poor girl...she got hit in the back with a couple of cruise missles.

Need the whole assembly

A lot of people in this topic really need to read up on exhaust theory.

Great idea,but in certain applications-it's not that simple.My nuts had a problem,no after market ones had the right diameter and taper on the end.

I paid 172.00($7.00 a piece) for twenty four of them from Courtesy.The same nuts,Nissan wanted 23.00 a piece for.

I scrapped one of those last year.

On the 75 to 83 Z motors there are two liitle coolant lines that are NLA.Here are two common part numbers that will work with two snips: Both are Dayco numbers. 86801 86500

yeah, i just saw it.

?????? :poop:

Now that's funny. Women: They hava all the pussy half the money all the songs are written about them and they're still not happy

http://tinypic.com/player.php?v=15hxslk&s=5

Didn't say "zero Nissans".Said no wheels/lugnuts.ANd they'll be gone from Texas before Arizona.

They are comparing it to Ishtar-that's how bad it bombed.

I bought the wheels for $100.00.Then i tried EVERY avenue possible(trust me on this one) around here-nothing found.Best wheel shop in town came close but no CEE-GAR.At least i didn't pay the $23.00 a piece Nissan wants.

all $180.00 worth

Stay with the FI.No downside to it.

I'll bet he's starving......

O.K.-that manifold with a progressive carb will be a disaster.Not a real good idea for the street.

Wish you luck......you're gonna need it.

My wife wants to re-do the hall bathroom.I said Cool.I've got the perfect wall paper for it! :blink: I think it's going to be some kind of floral print. :(