denmarkboy Posted September 25, 2014 Report Share Posted September 25, 2014 Spoken like true Oregon fan ! We do always seem to be fastest loser ( 2nd place ) . 1 Quote Link to comment
MicroMachinery Posted September 25, 2014 Report Share Posted September 25, 2014 You speak in riddles naner. Some know exactly what he's talking about.. 2 Quote Link to comment
q-tip Posted September 25, 2014 Report Share Posted September 25, 2014 Naner IS a riddle Quote Link to comment
smoke Posted September 25, 2014 Report Share Posted September 25, 2014 fuckin ducks :poke: 1 Quote Link to comment
a.d._510_n_ok Posted September 27, 2014 Report Share Posted September 27, 2014 here's one of me in Dallas a few years back. say, what's that in the sixth floor window......? Quote Link to comment
maltese Posted September 27, 2014 Report Share Posted September 27, 2014 Working around fiberglass insulation fucking sucks!! KKK.... you're doing it wrong. 1 Quote Link to comment
paradime Posted October 6, 2014 Report Share Posted October 6, 2014 No Maltese, that's a Teletubbies costume. He's Tinky Winky, you know, the gay one. 5 Quote Link to comment
maltese Posted October 6, 2014 Report Share Posted October 6, 2014 I thought they were all gay?¿? 1 Quote Link to comment
paradime Posted October 6, 2014 Report Share Posted October 6, 2014 Actually I sympathize with you skyblue. I spent my share of time crawling in blown in fiberglass insolation as a kid. Pure F'n hell. I was pulling low voltage security, audio, cable, phone, etc back in the days when they actually ran wire for that stuff. It was the stone age, we didn't have the fancy Tinky Winky costumes back then. I was lucky to get a long sleeve shirt and a paper face mask. I can still remember the feel of that shit in my skin. Heinous 1 Quote Link to comment
ericsb210 Posted October 7, 2014 Report Share Posted October 7, 2014 It has been 30 years since i pulled the insulation through the roof of the Port Angeles Comm College gymnasium. I still can feel that crap on my skin. Quote Link to comment
Busta Nut Posted October 8, 2014 Report Share Posted October 8, 2014 A University of Oregon jack,, be careful,,,,,,,,,,,,,,,, oh at first it will be the best thing ever and as time goes that little jack will become the greastest jack in the country,,,, jacking faster and higher every time you use it..It will be talked about by every body as the number 1 jack in the jacking community .. . But when counted on to bring it all home for everyone counting on it,,,,,,,,,,,, there will be disappointment. :poke: Nanner.....please tell me where you get your shit...... .......be a friend and share....... Some know exactly what he's talking about.. The people that know share his prescription........ ...........I want in....but I guess I'm not in the circle yet...... :lol: 3 Quote Link to comment
smoke Posted October 8, 2014 Report Share Posted October 8, 2014 Oregon Ducks, You do the research past that if you care. Quote Link to comment
Busta Nut Posted October 8, 2014 Report Share Posted October 8, 2014 Oregon Ducks, You do the research past that if you care. So somebody at OU sells good shit...... ......I'll see what I can find..... Quote Link to comment
KiloTango1200 Posted March 15, 2015 Report Share Posted March 15, 2015 Me fueling Rowan Drilling's Convair 580 @ Dugosh Aircraft, Kerrville TX Sometime in the early 80's. What the hell is an OSHA??? 2 Quote Link to comment
505plus5 Posted March 15, 2015 Report Share Posted March 15, 2015 KM, do you know, or anybody knows, what brand wheels those are/may be? Notice how the spokes reach the center? Ty! 2 Quote Link to comment
FlyinPat Posted March 15, 2015 Report Share Posted March 15, 2015 Hey 505,that troll is trying to lick your butt crack... 5 Quote Link to comment
505plus5 Posted March 16, 2015 Report Share Posted March 16, 2015 Hey 505,that troll is trying to lick your butt crack... No, not mine- KlassicMotion's! Yeah, his gf mentioned it to him! Lol 1 Quote Link to comment
bananahamuck Posted March 16, 2015 Report Share Posted March 16, 2015 KM, do you know, or anybody knows, what brand wheels those are/may be? Notice how the spokes reach the center? Ty! I don't know the brand but i think my brother has those on his 70 ,, they look pretty good cleaned up.. They don't tuck worth a damn with stock struts up front though. (edit) i think my brother is going for 70s gasser look in that photo. 1 Quote Link to comment
505plus5 Posted March 16, 2015 Report Share Posted March 16, 2015 I don't know the brand but i think my brother has those on his 70 ,, they look pretty good cleaned up.. They don't tuck worth a damn with stock struts up front though. (edit) i think my brother is going for 70s gasser look in that photo.Thanks, Banana... Yeah, imo they look better than the turbine styles that the spokes don't reach the center... just won't tuck them, though. Lol Oh! And, there are some that the spokes reach THE EDGE of the rims! Quote Link to comment
505plus5 Posted March 17, 2015 Report Share Posted March 17, 2015 KM, do you know, or anybody knows, what brand wheels those are/may be? Notice how the spokes reach the center? Ty! Found mines! They are stamped: Wheel Distributors, Inc. Ontario, Ca. but in a picture on the web they are named: Keystone Turbo III from Rolling Stock; BUT, I still would like to know about the ones in the pic. Quote Link to comment
q-tip Posted March 21, 2015 Report Share Posted March 21, 2015 I didn't know Cris cornell was taking selfies in 1992 3 Quote Link to comment
KiloTango1200 Posted July 17, 2015 Report Share Posted July 17, 2015 If you are a bad guy, you don't want this view of a USMC Super Cobra. 5 Quote Link to comment
KoHeartsGPA Posted July 17, 2015 Report Share Posted July 17, 2015 Me working on my dime last November Me & GF somewhere between Coos Bay and Florence last December No I'm not a beavers fan, SF Giants FUCK YEAH! 8 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.