datzenmike Posted March 24, 2017 Author Report Share Posted March 24, 2017 Also. For what it's worth. Albert dropped me off a set of 4 good tires. Some timing cover gaskets. (I think they are for an l20 instead of l16. Not end of world) he ordered me a new windshield gasket. And I think the clutch issue is resolved now. The clasp on the master was adjusted wrong. He is trying to make it right. So dude needs credit where it's due! I think all you need do is trim the top bolt hole off (or 2cm) and they will work on the L16/18. 1 Quote Link to comment
izzo Posted March 24, 2017 Report Share Posted March 24, 2017 I think all you need do is trim the top bolt hole off (or 2cm) and they will work on the L16/18. I asked around about it and was told even doing that it wasn't quite right. Quote Link to comment
flatcat19 Posted March 24, 2017 Report Share Posted March 24, 2017 I would think bolting new L20B timing cover gaskets in the L16-then just slicing what sticks over with a razor would be fine.. There is still sealing material in between cover and block. Gasket is flush with deck. Fuckitall. 2 Quote Link to comment
datzenmike Posted March 24, 2017 Author Report Share Posted March 24, 2017 I would think bolting new L20B timing cover gaskets in the L16-then just slicing what sticks over with a razor would be fine.. There is still sealing material in between cover and block. Gasket is flush with deck. Fuckitall. This. Only difference in the L20B vs. the L16/18 is the L20B cover is 0.788", 20mm or 2cm taller 3 Quote Link to comment
Fat510 Posted March 24, 2017 Report Share Posted March 24, 2017 Also. For what it's worth. Albert dropped me off a set of 4 good tires. Some timing cover gaskets. (I think they are for an l20 instead of l16. Not end of world) he ordered me a new windshield gasket. And I think the clutch issue is resolved now. The clasp on the master was adjusted wrong. He is trying to make it right. So dude needs credit where it's due! He got told you put him on blast, and he needs more victims to fuel his scamlust. Dude traded you a truck that wasn't his to get yours, which he's prolly gunna turn around and flip it. Quote Link to comment
jrock4224 Posted March 27, 2017 Report Share Posted March 27, 2017 "hey i got fucked......" "heres some stuff i was taking to the dump anyway ..." " awww thanks i love you and all you do for the community ....l" lol and the saga goes on.....this is timeless like a glory hole at a rest stop .. 2 Quote Link to comment
tdaaj Posted March 27, 2017 Report Share Posted March 27, 2017 Sounds about right Quote Link to comment
Rjawm Posted April 5, 2017 Report Share Posted April 5, 2017 Just doing my part for the community... 1 Quote Link to comment
flatcat19 Posted April 6, 2017 Report Share Posted April 6, 2017 Looking a bit like Insomniacs now. 2 Quote Link to comment
datzenmike Posted April 6, 2017 Author Report Share Posted April 6, 2017 Yeah, this should be Al's thread. Quote Link to comment
KoHeartsGPA Posted April 8, 2017 Report Share Posted April 8, 2017 That too, Ted! 1 Quote Link to comment
wayno Posted May 14, 2017 Report Share Posted May 14, 2017 Hey Ted, PM me, it says you cannot receive new messages. My email address is below. tmdatsuns@gmail.com Quote Link to comment
505plus5 Posted May 14, 2017 Report Share Posted May 14, 2017 Good Lord. Just read the whole mess. Man! Lol Quote Link to comment
datzenmike Posted May 14, 2017 Author Report Share Posted May 14, 2017 Cock teasers!!!!!!! Quote Link to comment
Farmer Posted May 14, 2017 Report Share Posted May 14, 2017 Why use use this thread to contact Ted. You pulled this back from at least 5 pages down. Quote Link to comment
tdaaj Posted May 14, 2017 Report Share Posted May 14, 2017 Because he knew id look at it 3 Quote Link to comment
wayno Posted May 14, 2017 Report Share Posted May 14, 2017 I tried messaging him and it said he could not receive any new messages, so when that avenue failed I used this thread to get in contact with him as I figured he would read it. :lol: I didn't think of using an old existing message/conversation we had going in the past, but now I know that will work as it is not a new message, it's an already existing message/conversation that can be used. Sorry but I just wanted to get a hold of him, and why I wanted to get a hold of him was important to me. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.