bananahamuck Posted November 18, 2016 Report Share Posted November 18, 2016 A couple of us Olympia area guys are going to try to make it,, cars can make it,, but might need that Tony Robbins sumbitch to come by my house Friday night.... You would also have to allow a 84 celica in ,,,, cuz wife aint riding in no "nerd mobile" ,,,,,,,,,,,, her words ,, not mine. 2 Quote Link to comment
Guest Mojo510 Posted November 18, 2016 Report Share Posted November 18, 2016 You can drive whatever you like here as long as you like Datsuns, that toyota should have a Datsun sticker on it somewhere...right? B) Lots of not-datsuns show up all the time. Steven DNW Quote Link to comment
bananahamuck Posted November 18, 2016 Report Share Posted November 18, 2016 Oh, i WILL be in a Datsun,,,,,,,,,,,,,,, :lol: 2 Quote Link to comment
tdaaj Posted November 18, 2016 Report Share Posted November 18, 2016 Will have a datsun in tow on a dolly, but not sure about parking so might miss it 1 Quote Link to comment
nickelpistol Posted November 19, 2016 Report Share Posted November 19, 2016 See you all in the morning, I'll bring the coffee. Quote Link to comment
Guest Mojo510 Posted November 19, 2016 Report Share Posted November 19, 2016 We have plenty of room for a car on a dolly, James had a car in tow last meeting and was fine. The shop is set up with entrance and exit doors with a horseshoe connecting them so you wont have any problem getting out. See all you guys soon. Steven Quote Link to comment
tdaaj Posted November 19, 2016 Report Share Posted November 19, 2016 Shoot, wished i had seen this, already headed home. Quote Link to comment
bananahamuck Posted November 21, 2016 Report Share Posted November 21, 2016 It was a loooooong morning ,,, ran out of gas in my car in my yard,,, cuz of fuel line leak i had SOMEWHAT fixed but had forgotten how much gas i had cleaned up a month before,,, OK ,, run down to station and get gas.. After that ,, went to Gas station to top off before leaving, neighbor tire is flat... Ok,,, put some fixAflat in it fill it up and worry about it tomorrow... While screwing bottle onto valve it broke off,,,OK just put on spare and deal with it when we get back...... Spare 13 wont fit aluminum drums,,, OK so lift whole side of car up and switch front to back....... At the pump We then met up with FAT510 Great,, we are on our way,, just a stop to top FAT510s tank off in Napavine and we are rolling , got my cold soda liquid,, clouds were thinning,,,,,,,,,,,,,,,,,,,, till he sticks the wrong key in ignition and locks that shit up tighter than a goldfishes ass,,,,,,,,,,,,, remove the whole shittery at the pump cuz steering is also locked................ Tore it apart jammed a flat head screw driver in there,,, and we're off. Started driving out my driveway at just before 8,, got to meet at i think right at 12 ,,,,, yeah that was a long ass 2 hour drive BUT on the way home we stopped at Otto's sausage and had some pretty damn good beer bratwurst cooked on a grill outside ,,,, so all in all a great day 3 Quote Link to comment
tdaaj Posted November 21, 2016 Report Share Posted November 21, 2016 I'm surprised i didn't see you guys on the freeway Quote Link to comment
bananahamuck Posted November 21, 2016 Report Share Posted November 21, 2016 Probably because you were to busy ducking us all morning to get out of going to meet. 2 Quote Link to comment
Z23T Posted November 23, 2016 Report Share Posted November 23, 2016 Damn, I didn't think there was going to be a meet this month because of the December dinner. Quote Link to comment
Laecaon Posted November 23, 2016 Report Share Posted November 23, 2016 No, there isn't a meet next month because of the December dinner. And well Christmas. Quote Link to comment
Z23T Posted March 18, 2017 Report Share Posted March 18, 2017 Kind of late, but http://datsunsnw.org/ Quote Link to comment
datzenmike Posted March 18, 2017 Report Share Posted March 18, 2017 old news. 1 Quote Link to comment
Guest Mojo510 Posted March 20, 2017 Report Share Posted March 20, 2017 Old news is still good news!! Glad this is getting around. Quote Link to comment
Guest Mojo510 Posted January 7, 2018 Report Share Posted January 7, 2018 Next DNW meeting January 20th 10am to 1pm at 509 NW Everett Street Portland OR 97209 Hope to see you there. Steven Quote Link to comment
jbirds510 Posted March 21, 2018 Report Share Posted March 21, 2018 Anything between now and Canby? Quote Link to comment
Draker Posted March 21, 2018 Report Share Posted March 21, 2018 Anything between now and Canby? Silver falls run early May. 1 Quote Link to comment
Guest Mojo510 Posted March 21, 2018 Report Share Posted March 21, 2018 I just do the Canby event, Christmas dinner and monthly meetings. To busy with race season and all the rest of the crap I get myself into. S Quote Link to comment
Loren O Posted April 14, 2018 Report Share Posted April 14, 2018 When is the next Datsuns NW meeting? Quote Link to comment
Guest Mojo510 Posted April 16, 2018 Report Share Posted April 16, 2018 DNW next meeting will be May 19th, 10am to 1pm 509 NW Everett st P-town No meeting in April, sorry racing agian. S Quote Link to comment
bananahamuck Posted April 17, 2018 Report Share Posted April 17, 2018 Maybe i can talk a couple jerkoffs from Oly to come with me and make the May meet,, to annoy you people again.. Last time we left your shop meet-up and went over to Otto's sausage kitchen and had some kinda sausage BBQ-ed on a grill.. Parking was terrible but it still was pretty fun. . 1 Quote Link to comment
Guest Mojo510 Posted April 17, 2018 Report Share Posted April 17, 2018 That would be cool to see you guys again, if your headed out to Otto's again maybe a few of us could join you guys this time! See if your buddy can bring some of that moon shine again, that stuff was stout :w00t: S Quote Link to comment
danfiveten Posted April 18, 2018 Report Share Posted April 18, 2018 Will try to make it in may. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.