bilzbobaggins Posted March 9, 2016 Report Share Posted March 9, 2016 I'm just happy to pass the info along! Only thing you gotta do if you want them really secure is make a baby notch in the bulb housing fingers where they click into the plastic. But the housings were like 2.99! Screamin deal Much cheaper than the nos harness on Egay!!! Quote Link to comment
Anderson521 Posted March 10, 2016 Author Report Share Posted March 10, 2016 Got to run this today, might mount it on my trans tunnel when I get around to fabbing it out 3 Quote Link to comment
Anderson521 Posted March 12, 2016 Author Report Share Posted March 12, 2016 I had a little thread goin in the electrical section, and these were some pics from it, chasing wires on my ratty harness only at someone's suggestion to actually use a test light and come to find my rear harness was unplugged the whole time! 1 Quote Link to comment
hobospyder Posted March 12, 2016 Report Share Posted March 12, 2016 Might want to give that fuse block a vinegarbath 1 Quote Link to comment
Anderson521 Posted March 12, 2016 Author Report Share Posted March 12, 2016 Might want to give that fuse block a vinegarbath Does that work pretty well?? 1 Quote Link to comment
Rick-rat Posted March 12, 2016 Report Share Posted March 12, 2016 Works really good 1 Quote Link to comment
Anderson521 Posted March 12, 2016 Author Report Share Posted March 12, 2016 Well I guess I know what I'm doing tomorrow haha need to replace those screws too 1 Quote Link to comment
Jester Posted March 12, 2016 Report Share Posted March 12, 2016 Well I guess I know what I'm doing tomorrow haha need to replace those screws too Good luck with that. Maybe you can get hold of them with a vise grip. Carefull not to brake them off. DanielC. on here hooked us up with a super nice fuse box for the Canby truck. I can dig up the info if you want. 2 Quote Link to comment
hobospyder Posted March 12, 2016 Report Share Posted March 12, 2016 Does that work pretty well?? before After I let it soak over night, just straight white vinegar. Cleaned up real great, pipe wrench for the actual fuse connectors but I don't have a good before shot of those just after Quote Link to comment
Anderson521 Posted March 12, 2016 Author Report Share Posted March 12, 2016 Good luck with that. Maybe you can get hold of them with a vise grip. Carefull not to brake them off. DanielC. on here hooked us up with a super nice fuse box for the Canby truck. I can dig up the info if you want. I'll give it a go with some wd first and then perhaps an ez out. But yeah they raped that screw head. Vinegar Really makes a difference tho Quote Link to comment
banzai510(hainz) Posted March 12, 2016 Report Share Posted March 12, 2016 Its works but I don't take mine out cause so much water over time sits under those fuse blocks that the screw more like will break. take phitis if you pull the wires off then just emery cloth or sandpaper it Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 Well i didn't get around to the fuse box buttt, I got my harness about 80% complete. Here's the drivers side Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 Makin a mess Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 So were you a part of the adventure to Ukiah today? Quote Link to comment
datson4life Posted March 13, 2016 Report Share Posted March 13, 2016 So were you a part of the adventure to Ukiah today? No. I worked. Then got out of work. To work again with my pops lol Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 Oh jeez! Well at least you're stayin busy lol Quote Link to comment
svo521 Posted March 13, 2016 Report Share Posted March 13, 2016 Was thinking to myself today while driving through the north bay area.... would be kick ass to see your build in person lol 1 Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 Yeah just lemme know when you're in the area it's always good to get someone else's perspective Quote Link to comment
Anderson521 Posted March 13, 2016 Author Report Share Posted March 13, 2016 A little rtv and some plastic should keep water out. Hopefully the heat doesn't cook the plastic but we'll see. Should be just fine Quote Link to comment
Jester Posted March 14, 2016 Report Share Posted March 14, 2016 What about getting some liquid electrical tape. Pretty sure it comes with an applicator brush too. 1 Quote Link to comment
Anderson521 Posted March 14, 2016 Author Report Share Posted March 14, 2016 What about getting some liquid electrical tape. Pretty sure it comes with an applicator brush too.I'll have to look into that Quote Link to comment
Anderson521 Posted March 15, 2016 Author Report Share Posted March 15, 2016 Anybody familiar with the quality of things from Singapore? Started chasing down why my blinkers don't work and wouldn't ya know, the bastard I bought it from took the relays for that too Quote Link to comment
datson4life Posted March 15, 2016 Report Share Posted March 15, 2016 Dang foo took everything. Hope he left tags and vins Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.