jesusno2 Posted November 4, 2012 Report Share Posted November 4, 2012 picked up this little racer last night runs like a little sewing machine. 3 Quote Link to comment
mrmark Posted November 4, 2012 Report Share Posted November 4, 2012 Nice find! 1 Quote Link to comment
vex210 Posted November 4, 2012 Report Share Posted November 4, 2012 Nice score, you going to love it...:) 1 Quote Link to comment
Laecaon Posted November 4, 2012 Report Share Posted November 4, 2012 I love 2dr sedan 210s. If only I didnt have to smog them where I live. 1 Quote Link to comment
RedBanner Posted November 4, 2012 Report Share Posted November 4, 2012 Even got a Ooga horn lol :cool: that's really clean looking! 1 Quote Link to comment
flatcat19 Posted November 4, 2012 Report Share Posted November 4, 2012 That thing is in great shape. Score! It will be interesting to see what YOU do with it. 1 Quote Link to comment
jesusno2 Posted November 4, 2012 Author Report Share Posted November 4, 2012 Yea the horn is awesome! I would like to swap to a CA or KA just wait till i can get a decent deal on one or do some trading for a set. would like to find some enkei meshies for it and do some chassis improvements. 1 Quote Link to comment
Turbo210 Posted November 5, 2012 Report Share Posted November 5, 2012 Make sure to start a build tread on it 1 Quote Link to comment
ggzilla Posted November 5, 2012 Report Share Posted November 5, 2012 Tread on it 1 Quote Link to comment
jesusno2 Posted November 5, 2012 Author Report Share Posted November 5, 2012 need some wheels for it. 13 or 14 inch im doing some research on wheel fitment 1 Quote Link to comment
COOCHaDAMus Posted November 5, 2012 Report Share Posted November 5, 2012 i helped max with the timing & stereo in it 2 Quote Link to comment
datsunfreak Posted November 6, 2012 Report Share Posted November 6, 2012 doing some research on wheel fitment What do you want to know? B) 1 Quote Link to comment
jesusno2 Posted November 6, 2012 Author Report Share Posted November 6, 2012 Offset numbers mainly. i heard a koing 14x7 -9 works well 1 Quote Link to comment
datsunfreak Posted November 6, 2012 Report Share Posted November 6, 2012 Offset numbers mainly. i heard a koing 14x7 -9 works well On a B210, yes. On a 210, not so much. Should just barely tuck in the rear with rolled fender lips, but it's gonna stick out in the front a good bit. If you swap to 280ZX front struts/brakes and add camber plates to run 1-2 degrees negative, you could maybe just tuck the Rewinds. For a 7" wheel, +0 to +10 works best on the rear, +10 to +20 works best on the front. With the 280ZX strut swap, then the fitment is same front to rear (narrows front track slightly). 1 Quote Link to comment
datsunfreak Posted November 6, 2012 Report Share Posted November 6, 2012 Forum member Lonestar has 15x7 +0 Rewinds on his car. Notice how the rears are 5mm inside the fender but the fronts are 5mm outside the fender? Swapping to 280ZX struts up front would tuck them in better. 1 Quote Link to comment
datsunfreak Posted November 6, 2012 Report Share Posted November 6, 2012 One of my old cars, 13x6 +0, rears tucked in, fronts flush Another old one of mine, 14x6 +11, fronts tucked slightly, rears tucked a lot... 2 Quote Link to comment
jesusno2 Posted November 6, 2012 Author Report Share Posted November 6, 2012 so i took a coil and a half out of both frt and back cant even tell! the suspension needs a serious overhaul 1 Quote Link to comment
ggzilla Posted November 6, 2012 Report Share Posted November 6, 2012 So really the rear needs spacers to make them look equal ... or different offset front & rear 1 Quote Link to comment
datsunfreak Posted November 6, 2012 Report Share Posted November 6, 2012 So really the rear needs spacers to make them look equal ... or different offset front & rear Or 280ZX struts swapped in. B) FYI, this is a +15 front +0 rear: 1 Quote Link to comment
jesusno2 Posted November 7, 2012 Author Report Share Posted November 7, 2012 id sure like a set of those bumpers! 1 Quote Link to comment
ggzilla Posted November 7, 2012 Report Share Posted November 7, 2012 So get some! it's been talked about to death here on ratsun. 1 Quote Link to comment
jesusno2 Posted November 8, 2012 Author Report Share Posted November 8, 2012 I'm to lazy to search! the time will come when i'm ready for now i'm all about getting a powertrain put together. 1 Quote Link to comment
jesusno2 Posted December 16, 2012 Author Report Share Posted December 16, 2012 got some 92's for my 210 i started the paint stripping process already is why they look so terrible. i'm gonna paint them all back to the og gold. I kinda got stroked though cause one wheel is a different damn offset. the pics were taken with the 0 offset which when you measure them if my math is correct they come out to a -13 poke in the rear FTW! (ha ha ha ha ha yea im a child) poke in the front (ha ha ha ha still a child) I need one more 15x7 with that 0 or 4 inch backspacing. can't post pics for some reason??? 2 Quote Link to comment
ggzilla Posted December 16, 2012 Report Share Posted December 16, 2012 It's a new Ratsun bug, see http://community.ratsun.net/topic/50139-img-code-no-longer-ftw/ Yes, any 0 offset wheel wider than 5" will poke out. 1 Quote Link to comment
jesusno2 Posted December 16, 2012 Author Report Share Posted December 16, 2012 Well a set of zx struts will fix it! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.