71ka510 Posted January 10, 2012 Report Share Posted January 10, 2012 ok well i am looking into getting some hats made...... and i was wondering who owned the ratsun logo... i would love to put it on a hat.... or how about the main datsun logo or the 510 emblem form the rear light panel..... other suggestions would be great Quote Link to comment
metalmonkey47 Posted January 10, 2012 Report Share Posted January 10, 2012 I'd love to have the Datsun logo on the front, and Ratsun.net on the back with the rats & wrenches 1 Quote Link to comment
datzenmike Posted January 10, 2012 Report Share Posted January 10, 2012 I believe Icehouse (Jeff Hino) designed the rats 'n wrenches logo. Quote Link to comment
Rustina 510 Posted January 10, 2012 Report Share Posted January 10, 2012 I would totally bust out ratsun badges all I've my car I they had them for sale Quote Link to comment
Skib Posted January 10, 2012 Report Share Posted January 10, 2012 I believe Icehouse (Jeff Hino) designed the rats 'n wrenches logo. idk who designed it but since Jeff owns the site I assume its covered under the same ownership. stickers and such have always been just asking permission, but Id PM Jeff (Icehouse) Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 well if icehouse designed it and gives me the ok.... i will see what it runs to get some flexfit hats made with the ratsun on the back and the datto logo on the front ( i used to work at en embroidery shop, so i can get good prices ) Quote Link to comment
darc510 Posted January 10, 2012 Report Share Posted January 10, 2012 i think putting the Ratsun logo on the front would be sick if it were off centered! Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 i like the offset logo idea too.... but once again i would need icehouse to give me the ok if he created the logo, i dont want to step on any toes..... Quote Link to comment
fisch Posted January 10, 2012 Report Share Posted January 10, 2012 i like the offset logo idea too.... but once again i would need icehouse to give me the ok if he created the logo, i dont want to step on any toes..... They actually hired a guy to design it as I understand it, but they do own the rites. Promise all the mods a free hat lol! (Or at least Icehouse!) Quote Link to comment
Zeusimo Posted January 10, 2012 Report Share Posted January 10, 2012 Black - 59Fifty Hat White - Rat-N-Wrenches Logo On The Front White - "RATSUN" Written On The Back I'll Buy It In A Heartbeat :D 1 Quote Link to comment
Skib Posted January 10, 2012 Report Share Posted January 10, 2012 Promise all the mods a free hat lol! (Or at least Icehouse!) Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 well fisch if he sees this thread, and gives me the ok,, i will do it, otherwise it would only be a datsun logo with maybe the website across the rear brim Quote Link to comment
fisch Posted January 10, 2012 Report Share Posted January 10, 2012 well fisch if he sees this thread, and gives me the ok,, i will do it, otherwise it would only be a datsun logo with maybe the website across the rear brim Try to PM him. Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 i hit up icehouse to see what he has to say on it Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 well if all the guys with rites chime in, they are welcome to a free one ...... Quote Link to comment
Icehouse Posted January 10, 2012 Report Share Posted January 10, 2012 I don't mind when people make stuff with the logo on it. I Think it's cool. Thomas's friend drew up the logo. 1 Quote Link to comment
The Dat-side Posted January 10, 2012 Report Share Posted January 10, 2012 Black hat with a tilted black rat 'n wrenches would be sweet. Completely seperate, we should get an about Ratsun page or something, like some info on the mods, the founders, and some other info. Quote Link to comment
71ka510 Posted January 10, 2012 Author Report Share Posted January 10, 2012 Well I sent the info to my old coworker, hopin to get a sample by the end of the week.... Thanks icehouse Quote Link to comment
Skulptr Posted January 10, 2012 Report Share Posted January 10, 2012 Id be in for one of those with the rat offset, sounds sweet Quote Link to comment
Guest kamakazi620 Posted January 10, 2012 Report Share Posted January 10, 2012 well if icehouse designed it and gives me the ok.... i will see what it runs to get some flexfit hats made with the ratsun on the back and the datto logo on the front ( i used to work at en embroidery shop, so i can get good prices ) I vote for screen printed trucker hats!!!! 2 Quote Link to comment
Rob W. Posted January 11, 2012 Report Share Posted January 11, 2012 I like the idea. I like rat and wrenches on the front and ratsun.net on the back. can't wait to see what these look like... Quote Link to comment
burrito213 Posted January 11, 2012 Report Share Posted January 11, 2012 hmmm... how about a photoshop of the ratsun idee'er on a trucker hat and get a vote. i'd be in for one if it was cool enough. Quote Link to comment
q-tip Posted January 11, 2012 Report Share Posted January 11, 2012 I'd love to have the Datsun logo on the front, and Ratsun.net on the back with the rats & wrenches i second that motion. or datsun logo up front rat& wrenches on back ratsun.net down the sides Quote Link to comment
Guest kamakazi620 Posted January 11, 2012 Report Share Posted January 11, 2012 i second that motion. or datsun logo up front rat& wrenches on back ratsun.net down the sides I'm thinking a blue hat White front foam with a black rats n wrenches, in bottom corner a little Datsun hamburger Quote Link to comment
Skib Posted January 11, 2012 Report Share Posted January 11, 2012 if you could make me one in this style had Id be down Im not a big fan of the flex fit or trucker style hats Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.