jesusno2 Posted March 23, 2011 Report Share Posted March 23, 2011 This may be a slow moving project due just to the shear cost of what the plan is. So far we focusing on the rearend first. So triangulated 4 link,heidts coilovers frt and rear so far this is what has been completed last weekend. 2 Quote Link to comment
]2eDeYe Posted March 23, 2011 Report Share Posted March 23, 2011 Can't wait to see how you get the coilovers mounted :cool: Quote Link to comment
jesusno2 Posted March 23, 2011 Author Report Share Posted March 23, 2011 2eDeYe' date='22 March 2011 - 06:14 PM' timestamp='1300842873' post='448224']Can't wait to see how you get the coilovers mounted :cool: Gonna get that done this weekend :) Quote Link to comment
dat77sun Posted March 23, 2011 Report Share Posted March 23, 2011 that 4 link setup is badass, always loved the look of a 4 link Quote Link to comment
510kevin Posted March 23, 2011 Report Share Posted March 23, 2011 friggin gangster, good work! Quote Link to comment
hacked521 Posted March 23, 2011 Report Share Posted March 23, 2011 looking good! Quote Link to comment
flatcat19 Posted March 23, 2011 Report Share Posted March 23, 2011 RAD! Can't wait to see this. Quote Link to comment
yello620 Posted March 23, 2011 Report Share Posted March 23, 2011 Luke, I need a notch like that in the back of my 620. Possible? Quote Link to comment
Pacific coast Datsun Posted March 23, 2011 Report Share Posted March 23, 2011 Id say your working fast not slow :cool: What size rims will you be running ? Quote Link to comment
jesusno2 Posted March 23, 2011 Author Report Share Posted March 23, 2011 Running the 16 inch rim with a 215 45 16 I had to take that into considiration when doing the 4 link geometry. Quote Link to comment
69FJWagon Posted March 23, 2011 Report Share Posted March 23, 2011 Luke, I need a notch like that in the back of my 620. Possible? Ya me too... :( Quote Link to comment
fastdadd Posted March 23, 2011 Report Share Posted March 23, 2011 quote name='yello620' Luke, I need a notch like that in the back of my 620. Possible? quote name='69FJWagon' Ya me too... :( me three Quote Link to comment
jesusno2 Posted March 23, 2011 Author Report Share Posted March 23, 2011 Its just a 6 inch pipe cut in half I can grab some more and make ya one gotta do it before Friday that's my last day at my current job. Quote Link to comment
yello620 Posted March 24, 2011 Report Share Posted March 24, 2011 What did you use to cut the frame with? Super clean, that is the part that i want. The six inch pipe is available locally, unless you hook us up. :sneaky: But i have one bed bolt that will need cut off, i have had the other seven loose and but anti-seize on them. Quote Link to comment
jesusno2 Posted March 24, 2011 Author Report Share Posted March 24, 2011 I just cut it with a torch I'll hook ya up bring it over someday. Maybe we can trade for some shit. Quote Link to comment
jesusno2 Posted March 27, 2011 Author Report Share Posted March 27, 2011 Moar OICS! All done for now. Quote Link to comment
jesusno2 Posted March 27, 2011 Author Report Share Posted March 27, 2011 Short arc with hard wire 90/10 gas Quote Link to comment
flatcat19 Posted March 27, 2011 Report Share Posted March 27, 2011 Flux-Core? Short arc with hard wire 90/10 gas Nope. Fucking nickels! Good job! Lets see more. Quote Link to comment
jesusno2 Posted March 27, 2011 Author Report Share Posted March 27, 2011 Ok Tight fit!! 3 Quote Link to comment
flatcat19 Posted March 28, 2011 Report Share Posted March 28, 2011 What are your plans for the front? If it's anywhere near as good as you've already done... Loving this build! Quote Link to comment
jesusno2 Posted March 28, 2011 Author Report Share Posted March 28, 2011 CA18DET hopefully soon and coilovers in the frt too. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.