Jump to content

Zeusimo

Senior Member
  • Posts

    1,635
  • Joined

  • Last visited

Everything posted by Zeusimo

  1. Also What's The Seal Called To Replace Once The Shaft Is Out?
  2. Would I Need 3? How Can This Be Done? Do I Place Them In The Same Position They Were In? What Grease Would I Use? Never Done This Before :unsure:
  3. New U-joints Can Be Used On Both Sides On Driveshaft?

    1. I'm BLUE

      I'm BLUE

      yes ,,, you can haz two u-joints naow ,,,

       

      both sides = correct

  4. New Air Filter, Tune Carb, Adjust Valves And Timing...
  5. Flat Tire From Driving On A Ghetto Road >:0

  6. Valve Cover Toque For L20b?

    1. izzo

      izzo

      Book says 10-13 lbs. Dont do it! It will break the bolts. Get them all finger tight, then tighten with a socket wrench. Go around and do it again as once they are tight, they are all loose the first time.

    2. I'm BLUE

      I'm BLUE

       

       

      5ft-lbs !!!

  7. Has Skip Seen This Thread Yet? :lol:
  8. Tach, Fiero Rad, 60A Alt, 32/36 Weber, Disk Brakes, 5 Speed, Clutch, White Walls, Repair Dash, Buff The Paint. Basic New Car Things... Adjust Valves, Bleed Brakes/Clutch, NGK Plugs, Wires, Cap, Rotor, Ect, Ect... And Most Important Of All, Slam It :P
  9. How Much Would It Cost To Build A Nice Lz20b?

  10. That A/C Doesn't Look Like A 620 To Me
  11. I Would Say Yes :unsure: :P
  12. Which Dynamat For Floors? Shiny Dynamat Or Black Dynaliner?

    1. Zeusimo

      Zeusimo

      OPINIONS! OPINIONS!!

    2. ptown green

      ptown green

      Im happy with fat mat. seems like the same shit, and works. and cheaper

  13. Where Do You Get POR15?

    1. Laecaon

      Laecaon

      auto parts store? online. My local Baxter carries it. Expensive though...

    2. FoxyRoadster
    3. lumberjackj

      lumberjackj

      ebay...they have an offical por15 outlet...dont let it sit around either, it goes bad

  14. Anyone Selling 1.5" Lowering Blocks?

    1. bananahamuck

      bananahamuck

      Tdaaj is going to pick up a 620 from my yard this weekend and it looks to have 2 sets on it

      and everything he has is for sale

       

  15. Take TONS More OICS, You Will Miss This Truck Btw... IBTL
  16. Anyone Have 1.5" Blocks For Sale?

  17. The Only Thing Good About Newer Cars Is That They Have Cupholders :D

    1. Show previous comments  2 more
    2. Stupid_fast

      Stupid_fast

      Fuck, I meant beer. =(

    3. Stupid_fast

      Stupid_fast

      Apparently I've had a little too much. KEK

    4. DAT510

      DAT510

      lol man we know what you meant, just giving you shit :D

  18. When Lowering A Truck You Need To Raise The Carrier Bearing Or Shims?

    1. jon521

      jon521

      shit, i dropped the back of my 521 3in and did nothing to the carrier bearing :/

    2. Zeusimo

      Zeusimo

      Just Spaced 1.65" And Everything If Fine Now :)

  19. Got Some 720 Leaf Springs :cool: As You Can See There Is A Difference In Height... About 1.75" Also These Springs Give A Smoother Ride :D Later I Will C Notch And Raise Front Shock Mounts But For Now This Will Do :cool:
  20. Lowering My Truck Right Meow :o

    1. Show previous comments  1 more
    2. Farmer Joe

      Farmer Joe

      if your on ratsun, then i dont think ya are buddy... lol

       

      OICS OR IT DIDNT HAPPEN

       

    3. Jayden71

      Jayden71

      lettin the air outta teh tirez eh??

    4. Pumpkn210
  21. Doesn't Icehouse Have One Of Those? :blink:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.