Zeusimo
-
Posts
1,635 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Classifieds
Everything posted by Zeusimo
-
I Depends How Much You Lowered It... I Have 7 Degree Pinion Shims To Correct The Angle :D The Best Thing You Can Do Is Go To Harbor Freight And Buy Yourself One Of These: http://www.harborfre...nder-34214.html Then Measure The Difference In Angles..... And BAM! Get That Angle Pinion Shim :lol:
-
Where Are The OICS?? :blink:
-
What I Said Would Only Cost $100, And An Afternoon Of Work :D
-
Your discount code is: 70293945832019 This discount code expires on November 27, 2011; so don't wait!
-
So I Was With My Friend, She Was Driving Her Car And Using The Clutch Twice To Shift Once As In Clutch Pedal In, Neutral, Clutch Pedal Out, Clutch Pedal In, Next Gear, Clutch Pedal Out Is There A Point To This? :blink: I Just Push Clutch Pedal In, Next Gear, Clutch Pedal Out...
-
L16 Right? Look On The Block, It Should Tell You What Motor You Have
-
I Would Have Made The Whitewalls Wider :cool:
-
KYB Gas-A-Just , Delete Bump Stop Brackets, And Raise Shock Mounts 2" :P It All Depends If You Want To Maintain Lowered Height
-
Plus 1 To You Sir ^^ They Could Have Just Been Coloured In With A Sharpie
-
I'd Just Go With Summit And Spend The Extra 10 Peace Of Mind :)
-
Flashlight And Akward Positioning FTW! :P
-
Pay No Attenrion To Your Timing Mark Has The Motor Ran While You Had It? Your Actual Timing Mark Is On This Part: This Is What You Should See For TDC:
-
What Do You Guys Think Of A R33 RB26DET Powered El Camino?
- Show previous comments 4 more
-
How bout El Camino Powered R33 ???
ollz
-
I'm loving it, chevelle based or monte carlo?
-
nm saw the 85
-
A Quick Way To Check If Master Is Bad Is To Take Lid Off And Push Clutch Pedal In And Out The Fluid In The Resivour Should Not Move At All If You Get Gushing, Squirting Ect... It Is Bad When I Replaced My Hydraulics I Had To Take My New Master Apart, Put It Back Together And Try Again And It Worked :lol:
-
Where's The Oics? :blink:
-
Slap Some Wide Whites On There And Slam It! :cool:
-
This Is What I Have: Their Monroe Shocks That Get Stiffer When Applying Load And When Unloaded They Still Provide A Smooth Ride Without Changing Ride Height
-
I Hear Crickets... :lol: Where's Datzenmike?
-
Without Oics We Can't Beleive You :P
