Jump to content

bananahamuck

Senior Member
  • Posts

    15,659
  • Joined

  • Last visited

  • Days Won

    55

Everything posted by bananahamuck

  1. I was talking about the car But on a related note the cube apparently comes stock with seed sifter built into the center of the dash..
  2. At the car show in Seattle most of the Nissans they had there were g-i-normus even the hood of the truck i opened was heavy (((BUT)))) on their "make yourself one" computer they had oics of a concept little 60`s throw back future van thing called the BEVEL lowered down this thing would be the shit...I would buy it anyways.. Oh, and they wouldn`t even let anyone touch the leaf
  3. I would just get pertronix i have been running them in 55 ford truck for 5 years 72 celica for five years and a 70 510 for 2 years not one problem at all ,and the celica my nephew BEATS everyday .The pertronix is only about 15 or 20 dollars more and the ones we bought at Portland swapmeet (NEW ) we payed about $60.00 and no shipping. And yes you have to use single point distributor cause rubbing block on shaft of dual points is smaller.
  4. Went to international auto show and saw this on 1st ave in front quest field
  5. Maybe me and my older boys will roll over to bulldog territory next weekend and snap some secret spy photos of this project.
  6. Oh crap! i spelled it wrong to! sorry

  7. Ya haven`t seen the orange "charliebucket" b210?? cause that car looks pretty BAD ASS!!..and yes I did mean to yell it`s that cool.
  8. "Sorry if it's not rat-fucked together outta spit-wads, zip ties, electrical tape, and a few shitty cans of spray paint".................. HEY!! i resemble that remark.............
  9. The dime quarterly has good simple diagrams ,,can`t learn to link to save my life ,,but their there
  10. Sold my two door rx2 @ rx4 about twenty years ago have only seen 1 rx2 and no other rx4 on the street since
  11. Avatar stays with beat starting about 2:35
  12. I am once again minivanabus driveraroundrerus

    1. bananahamuck
    2. philcas1987
    3. bananahamuck

      bananahamuck

      yep $900. dollars and i couldn`t be happier cause i still have a few twentys in my account

  13. They say it doesn`t rain very much in Seqium and there is great hunting and fishing up there,hot summers not so much, maybe just tow the rigs up there
  14. We had a kid do this when i was in junior high
  15. If yer dad has more cars like that i know a dude that could store them for him maybe start them up drive em around once a week,,just to keep um in running condition ya know.
  16. So this is what got done I wanted to isolate electric fuel pump noise, son wanted to just take off mufflers,so thought to use a 76 620 motor mount with plate for more mounting surface. could not find tri-square so used a cassette tape box then he cut sheet and ground it marked holes and drilled for bolts then welded it together this is JUST before I / he noticed he had been cutting backwards didn`t lose any toes or fingers quick reflexes i guess finished mount with neoprene and nylon washers with big neoprene gasket had i guy say this car would be like a pinto (unlikely with frame rails bigger than on my truck) but my son being only sixteen when he gets to drive the car THIS is the end you should be worried about. then it rained
  17. Braden man,, thanks i`ve been a stay at home parent for fifteen years so working with my boys is like American chopper,without the caring,compassionate father figure Like i first posted it`s not father son project it`is a dad watch son project. I have seen lots of father,son projects and bought and reassembled and sold more than a few.If you do start a project with your kid (girl or boy) let them help you on a running,driving vehicle and let them screw up (within reason) and make them WATCH you fix their mess.This isn`t his first car but the first "drag it from the back" hopefully this will lead to him helping with a Datsun project that is almost ready to go.
  18. So im moving wheels around so son can get on fuel pump mounting after football practice for this project and ran one into the other like this BAM!! crap, I think I will go take a nap now, screw him AND his Lincoln
  19. was moving wheels around shop and ran one swastika into the other and destroyed center cap

    1. Show previous comments  2 more
    2. elmerfudpucker

      elmerfudpucker

      people have been beaten over scuffing them here....

    3. bananahamuck

      bananahamuck

      Doh!! is right. it couldn`t have been the one of the older rounded style

    4. bananahamuck

      bananahamuck

      They were extra set we just bought at junkyard and if ya saw the inside of my garage you wouldn`t put anything down cause you aint finding it again..ever

  20. New?? how do they even make it for that low a price?
  21. ^^^ That rig has been for sale for a looooong time.
  22. We got these two ladies through "pet finders" lewis county WA animal shelter. Found cat (Princess) as kitten and got dog( Piglet )one year later as one year old,which makes them the same age,so we have alot of love for pet finders website. also like you wrote they are honest about the temperament / if they are good with cats.
  23. this after you gave me and my camera guy the slip more than once....
  24. Actually i posted a white two door ,,thats hard to catch up with cause he`s always on the move,,in sightings((page 96)) that was taken in Monte. BUT i don`t live in Tumwater either ,gotta keep em guessin..................................................Rusty Shackelford
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.