Jump to content

Z-train

Senior Member
 View Profile  See their activity

  • Posts

    4,277

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Z-train

  1. Z-train
    150 pounds is out of "serviceable specs".
  2. Z-train
    THis wasn't my doing.
  3. Z-train
  4. Z-train
    You want a motor you put time & money into to run with 10 PSI?
  5. Z-train
    The most headroom in 620's will be with buckets.
  6. Z-train
    Food related:
  7. Z-train
    Ah-HAH!!!!A remanent from the stroker build.If anyone neeeds it,i want postage for it.
  8. Z-train
    Clock Interior plastic: A-pillars Gate hinge covers Jack cover & nut right tail light lense
  9. Z-train
    Factory AC mount in it?
  10. Z-train
    Anything i give a shit about has Autometer mechanical guages in it.
  11. Z-train
    I just looked.THe FSM doesn't have the diagram you need.Pull the rear right cargo panel off and replace all the hoses you see.
  12. Z-train
    Get the FSM and re-do all the lines.Pull the passenger side panel and replace all the lines to the purge tank.I don't think your tank is bad.I'll have a wagon tank in a month or two.
  13. Z-train
    A 3/8ths drive torque wrench?!!
  14. Z-train
    The above is plausible.If so,then the pump is also sucking air.Not good.Pull the pan and sleep good.
  15. Z-train
    What is this from?The heater core nipple is HUGE.Bigger than i've seen.Ideas?
  16. Z-train
    This is what the IPO did:
  17. Z-train
    number 3 would be correct!!
  18. Z-train
    FJ..thanks!!
  19. Z-train
    check your PMs. I'll post a pic later today Check the pictures here: http://community.ratsun.net/topic/45205-79-620-with-factory-acneed-some-pics/
  20. Z-train
    Try Courtesy in Tejas.
  21. Z-train
    Mike,with a Sanden compressor,the lower outlet angle becomes a moot point-correct?
  22. Z-train
    By left,do you mean the passenger side?There are two parts to the 79 A/C set-up.The bracket that holds the compressor where th efuel pump normally is,and the front bracket that holds the idler pully and bolts to the TC inspection mount.
  23. Z-train
    Compressor bracket needed for a 79 620
  24. Z-train
    Thanks Mike. THe a/c switch still might be a good number at the dealer.
  25. Z-train
    150 for FOUR?!!Buy them.Lug nuts are 9.00 a piece from Courtesy.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept