Madness Posted December 5, 2009 Author Report Share Posted December 5, 2009 I think its only proper i make the 1000th reply :D Quote Link to comment
DatsunKid Posted December 5, 2009 Report Share Posted December 5, 2009 You sir actually are the 1001 reply :lol: Quote Link to comment
Madness Posted December 5, 2009 Author Report Share Posted December 5, 2009 1001st post. 1000th reply. Quote Link to comment
denveratsun Posted December 5, 2009 Report Share Posted December 5, 2009 :D Thats cool Madness...real cool..what do you do, sit there and watch it?:blink: Quote Link to comment
slam_dat_sun Posted December 6, 2009 Report Share Posted December 6, 2009 I pissed on my tire, that more action than my truck has seen since June :fu: :poop: heads . :lol: Quote Link to comment
Guest Rick-rat Posted December 6, 2009 Report Share Posted December 6, 2009 replaced master cylinder, finally got the brakes working right. Quote Link to comment
DatsunKid Posted December 6, 2009 Report Share Posted December 6, 2009 1001st post. 1000th reply. Ah you got me there :lol: Quote Link to comment
moparvwfreak Posted December 6, 2009 Report Share Posted December 6, 2009 beat the piss out of it going to seattle AGAIN. this is the third time this week i have been there and back in my little truck. gotta figure out why my valves keep comming out of adjustment though. i can hear em tapping up a storm and i just adjusted them on tuesday. Quote Link to comment
1sad521 Posted December 6, 2009 Report Share Posted December 6, 2009 looked at it like that ex that you never get over as i was stepping into my truck that runs. and then started a build log:p Quote Link to comment
fastdadd Posted December 6, 2009 Report Share Posted December 6, 2009 i was doing the brakes and reindexed the torsion bars now it sits an inch and half lower than before looks cool but i cant get out of my driveway Quote Link to comment
86720 ST Posted December 6, 2009 Report Share Posted December 6, 2009 I got my heater working. I had to replace the switch on the dash Quote Link to comment
Bob3 Posted December 6, 2009 Report Share Posted December 6, 2009 I'm cleaning my shop, while watching the Broncos kick some KC butt! It is 16 deg outside and my poor 620 won't start.:( I'll get my boys to help me push it into the warmth of the shop.:P Then I'm going to test fit the new wheels I got for the MX520.:thumbup: Quote Link to comment
Madness Posted December 6, 2009 Author Report Share Posted December 6, 2009 :DThats cool Madness...real cool..what do you do, sit there and watch it?:blink: Actually just happened to glance over and see that it had 999 replies :D I'm cleaning my shop, while watching the Broncos kick some KC butt! It is 16 deg outside and my poor 620 won't start.:( I'll get my boys to help me push it into the warmth of the shop.:P Then I'm going to test fit the new wheels I got for the MX520.:thumbup: PICTURES!!! :eek: Its damn cold today. Saw that black forest/monument was getting pounded with snow this morning! Quote Link to comment
Datsun 78 Posted December 10, 2009 Report Share Posted December 10, 2009 cleaned the fuel lines and took out the gas tank easy:D and filled it up $50:( Quote Link to comment
77 rustrat Posted December 10, 2009 Report Share Posted December 10, 2009 started pulling motor for 300zx turbo swap Quote Link to comment
J.C_620 Posted December 10, 2009 Report Share Posted December 10, 2009 run the crap outta mine till it started running on 3 cylinders so i went home pulled the valve cover to find a lash pad laying under the cam:( slamed the hood and called it a day valve lash can wait till thursday:D Quote Link to comment
TrevDaddy Posted December 10, 2009 Report Share Posted December 10, 2009 Drained the radiator, put some new coolant in it. It's 14 degrees here. Quote Link to comment
uhhitsfuzzy Posted December 13, 2009 Report Share Posted December 13, 2009 drove it like i stole it and made it go sideways! thanks to the rain Quote Link to comment
Smiley720 Posted December 13, 2009 Report Share Posted December 13, 2009 I welded in the notches, cut the frame out. Now the truck teeter totters on the dive shaft crossmember, but it sits all the way down! Quote Link to comment
bob72gts Posted December 13, 2009 Report Share Posted December 13, 2009 Looked at my 79 KC longingly as I walked by. Tomorrow morning driving 250 miles to pick up a Z22S for her. L22 build coming soon. Quote Link to comment
moparvwfreak Posted December 19, 2009 Report Share Posted December 19, 2009 adjusted the front brakes, greased the front end, and figured out why my reverse lights dont work and wont. whatever pushes the switch in the trans is not pushing it. so no reverse lights. sucks too because i know if it was pushing on the switch they would work. Quote Link to comment
greybeard Posted December 21, 2009 Report Share Posted December 21, 2009 Went and picked up 944 suspension parts for my Bug build. 944 spindles,rotors,hubs and calipers for the front. 944 aluminum trailing arms loaded with brakes for the rear. going on a 74 Super Beetle, german look. Quote Link to comment
J.C_620 Posted December 21, 2009 Report Share Posted December 21, 2009 took it out to do some do-nuts in the snow and got disapointed to hear the new exhaust that was installed friday hitting the rearend when i hit a "bump" Quote Link to comment
slam_dat_sun Posted December 21, 2009 Report Share Posted December 21, 2009 took it out to do some do-nuts in the snow and got disapointed to hear the new exhaust that was installed friday hitting the rearend when i hit a "bump" Man that sucks, I bet you can go back to the exhaust shop and they will adjust it for free, just a thought ............ Quote Link to comment
J.C_620 Posted December 21, 2009 Report Share Posted December 21, 2009 Man that sucks, I bet you can go back to the exhaust shop and they will adjust it for free, just a thought ............ he better fix it cause that loud bang dosent sound too good neither does the pipe vibrating on the cab floor i paid him $200 bones and that didnt include the muffler or the manifold flange that i already had made and he is a new shop/business and i would hate to give him a bad name afterall our shop gets more business we just dont do exhaust work Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.