Beowulf Posted September 10, 2020 Author Report Share Posted September 10, 2020 https://www.dropbox.com/s/y3c41c8lye5kn2g/FDA5190C-2BBA-4431-A9A5-FEB983CA4E3E.jpeg?dl=0Well my water/media blaster came and got a chance to use it. Used coal slag and it doesn’t flow to well and is the equivalent to 80 grit. Too coarse but does work, biggest thing is that the attachment does work and no dust. Think I’ll try sand tomorrow and see if the results are even better. So here what I got done and tomorrow I’ll cut out the rust and make a patch panel me and adding photos don’t get along https://www.dropbox.com/s/jdvr92blhrm4hc8/CBD90AEC-5290-466F-9EA6-D922D8064FE7.jpeg?dl=0 Quote Link to comment
Beowulf Posted September 11, 2020 Author Report Share Posted September 11, 2020 https://www.dropbox.com/s/sgw8xzn5fga7m74/Photo Sep 11%2C 3 37 13 PM.jpg?dl=0 Got the patch tacked in just in time for my gas bottle to show up, and no time to get it filled till Monday!🤬. Hate flux core but couldn’t wait. Patience not my strong suit, lol. Quote Link to comment
Beowulf Posted November 4, 2020 Author Report Share Posted November 4, 2020 (edited) Project coming along. Basic body custom 101. Lol. Going to led tail lights. Need to figure out how to post more than one pic at a time🤬 Edited November 4, 2020 by Beowulf Add pic 1 Quote Link to comment
Beowulf Posted November 4, 2020 Author Report Share Posted November 4, 2020 (edited) Bed is coming along, rust repaired, rhino lined and inside painted. Hope to paint the rest tomorrow if wind dies down and warms up Edited November 4, 2020 by Beowulf 3 Quote Link to comment
Beowulf Posted November 5, 2020 Author Report Share Posted November 5, 2020 (edited) Right side first coat painted, few small runs that will sand out then another coat. Little too cold but warmer weather leaving us. Any one looking to paint cheaply Rust-oleum Turbo only colors I’ve found are white or black both gloss. Goes on heavy wide pattern but lays out nice. Never had a rattle can do so well. Edited November 5, 2020 by Beowulf 1 Quote Link to comment
Beowulf Posted November 5, 2020 Author Report Share Posted November 5, 2020 Just now, Beowulf said: Right side first coat painted, few small runs that will sand out then another coat. Little too cold but warmer weather leaving us. Any one looking to paint cheaply Rust-oleum Turbo only colors I’ve found are white or black both gloss. Goes on heavy wide pattern but lays out nice. Never had a rattle can do so well. Yes had to paint in the open lol Quote Link to comment
]2eDeYe Posted November 5, 2020 Report Share Posted November 5, 2020 Gotta do what you gotta do 😄 looks good 1 Quote Link to comment
Beowulf Posted December 31, 2020 Author Report Share Posted December 31, 2020 Won’t be posting for a while, truck on hold. Diagnosed with stage 4 prostrate cancer. Take care guys and do you yearly screening, came on me in one year. 2 Quote Link to comment
Aaron Datsun Posted December 31, 2020 Report Share Posted December 31, 2020 Dang brother sorry to hear. Prayers for you and yours. 1 1 Quote Link to comment
Ooph! Posted December 31, 2020 Report Share Posted December 31, 2020 Cancer sucks, I had surgery for Prostate cancer in 2018 and am still having some recurrence. Stay positive prayers sent 1 1 Quote Link to comment
]2eDeYe Posted January 4, 2021 Report Share Posted January 4, 2021 Fuck cancer. Hope you kick it’s ass and get back to the truck soon 🙂 1 Quote Link to comment
ShutterMeShort Posted January 4, 2021 Report Share Posted January 4, 2021 Good start to the project! I'm not sure patience is anyones strong suit! lol. I hope you find time soon! Really sorry about the prostate cancer diagnosis. I lost my father earlier this year to prostate cancer. EVERYONE PLEASE STAY UP ON YOUR SCREENINGS! AND PAY ATTENTION TO YOUR PAIN AS YOU GET OLDER - ITS NOT ALWAYS JUST GETTING OLDER! Quote Link to comment
Beowulf Posted January 4, 2021 Author Report Share Posted January 4, 2021 Very true went from fine last year to stage 4 this year. So all you guys stay up on things, only sign I had was hard to urinate. Off to MD Anderson cancer center I go. Be safe guys, happy new year 1 Quote Link to comment
Beowulf Posted January 15, 2021 Author Report Share Posted January 15, 2021 Hi all, first chemotherapy today, so far so good. No nausea but next few day will tell. Hope to work on small things as I feel like it. thanks for the wishes and prayers. Having inserts I made tig welded into place want different look on the rear for tail lights and center exhaust. Want to build a front spoiler also not sure of look yet. Thinking rally look with large center lights. 2 Quote Link to comment
Beowulf Posted January 24, 2021 Author Report Share Posted January 24, 2021 afternoon all. first week of chemo kicked my butt. first days not so bad but 4,5, and 6 thought I was going to die. moving around some today so thought I'd ask a question. Has anybody here relocated brake lights to their tailgate? I have a set of round C4 corvette tail lights and was thinking of using them low in the tailgate. one each side with a smaller round to the inside. Kind of like the Nissan Skyline had. Thanks all Quote Link to comment
mrbigtanker Posted January 25, 2021 Report Share Posted January 25, 2021 6 hours ago, Beowulf said: afternoon all. first week of chemo kicked my butt. first days not so bad but 4,5, and 6 thought I was going to die. moving around some today so thought I'd ask a question. Has anybody here relocated brake lights to their tailgate? I have a set of round C4 corvette tail lights and was thinking of using them low in the tailgate. one each side with a smaller round to the inside. Kind of like the Nissan Skyline had. Thanks all Wow man sorry to hear about the health, I pray for you and a speedy recovery. Now as for your idea please don't do it. Its your truck yes, do it if you feel good about it, How ever the idea would be is turn the bottom section below the bed as a roll pan and run vett lights there. It would be much cleaner and for if if future sell of truck, easier to convert back to stock. 1 Quote Link to comment
Beowulf Posted March 8, 2021 Author Report Share Posted March 8, 2021 Hi all, worked some on the truck between chemo. Made some patches for the rusted doglegs on the front fenders and filler panels for the taillight housings. Good friend welded them up for me. Decided on led lights for a change, small and simple. Be glad when it warms up so I can get back on it. Chemo takes so much energy out of you, can’t deal with the cold. Quote Link to comment
Beowulf Posted April 16, 2021 Author Report Share Posted April 16, 2021 (edited) Getting work done on fenders a little at a time. Hope to paint soon as patch panels are worked in and most dents gone as best I can lol. anybody ever back mounted the front side marker lights so a little more flush? Edited April 16, 2021 by Beowulf Content 1 Quote Link to comment
]2eDeYe Posted April 16, 2021 Report Share Posted April 16, 2021 2 hours ago, Beowulf said: anybody ever back mounted the front side marker lights so a little more flush? Yes, it is very easy, you just need longer bolts. The front and rear lengths are different or something was different, it was a long time ago. Quote Link to comment
Beowulf Posted May 9, 2021 Author Report Share Posted May 9, 2021 Fender and taillight mounts first coat done. Hope to finish other fender tomorrow as I had a weird paint reaction. Second coat caused a wrinkled paint in areas and had to sand it all out 🤬. Slowly making progress. Quote Link to comment
Beowulf Posted May 22, 2021 Author Report Share Posted May 22, 2021 Well both fenders are done, drivers door, lower valance and cowl cover. Picked up some Toyota rims for 80.00 and filled in the emblem area and painted. Quote Link to comment
Beowulf Posted June 15, 2021 Author Report Share Posted June 15, 2021 (edited) Need help. Cannot get the door lock to work. Both inside and out work the latch but the lock rod will not engage. Rod won’t go up or down to engage door lock even when disconnected from key cylinder. on a good note got the interior panels covered Thanks in advance Edited June 15, 2021 by Beowulf Quote Link to comment
Beowulf Posted June 15, 2021 Author Report Share Posted June 15, 2021 Got it figured out. Will only work when door is closed, not on my work bench lol 1 1 Quote Link to comment
Beowulf Posted July 2, 2021 Author Report Share Posted July 2, 2021 Cab exterior is finished painting, starting on the inside. And all new window glass seals replaced. 1 Quote Link to comment
Beowulf Posted July 2, 2021 Author Report Share Posted July 2, 2021 Working on interior now. Pulled dash to repair and paint. Didn’t want a brown dash with a blue interior. Repaired the cracks, sprayed it first with Bond Aid surface prep, then bed liner. I like the look. Now what todo with the ugly gauge cluster face? 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.