Redrumls Posted March 13, 2017 Report Share Posted March 13, 2017 When I purchased my goon the PO gave me these 280 z struts that have been cut down for the 510 with brakes. He said it was missing something, im not sure what he said. Here's a pic. Thanks for any info. Greg Quote Link to comment
Draker Posted March 13, 2017 Report Share Posted March 13, 2017 Hope those are 280zx struts. Missing hubs, rotors, calipers, pads, camber plates. 2 Quote Link to comment
Draker Posted March 13, 2017 Report Share Posted March 13, 2017 Probably want bump steer spacers too. Quote Link to comment
Redrumls Posted March 13, 2017 Author Report Share Posted March 13, 2017 I have all the brake stuff, I don't remember if he said there was a spanner nut missing or something like that missing. Bump steer spacers... I'll have to check into that to see what they are & where they go. Camber plates.. I don't recall seeing those.. something I'll have to get. Thanks, Greg Quote Link to comment
Redrumls Posted March 13, 2017 Author Report Share Posted March 13, 2017 I don't remember if 280, 260 or 240. They are from a Z made to fit a 510. I want to lower the goon now and want to make sure I have everything before I tear into it. Greg Quote Link to comment
Big_E-Dog Posted March 13, 2017 Report Share Posted March 13, 2017 tophats for the springs too....techno toy has some with the bearing thats just sexy....running them now!!! Quote Link to comment
q-tip Posted March 13, 2017 Report Share Posted March 13, 2017 I was going to say proper top hats but I see you figured that out. If there is not some kind of set screw on those adjusting nuts for the spring then there should be another nut to lock it down. Quote Link to comment
datzenmike Posted March 13, 2017 Report Share Posted March 13, 2017 There was a reason z struts are not used on other Datsuns. I think the strut angle is different. The 510 strut to spindle angle (and others) are 10 degrees. Check those. Camber plates may not be able to compensate for this. Quote Link to comment
thisismatt Posted March 13, 2017 Report Share Posted March 13, 2017 Hard to tell from the pic...do they have the gland nuts to keep the shock inserts in place? Quote Link to comment
Redrumls Posted March 13, 2017 Author Report Share Posted March 13, 2017 Thanks everyone, I'm going to check into everything mentioned. I hate getting parts like this that I didn't initially buy & have to figure out if there is anything missing or if they will even work... thanks, Greg Quote Link to comment
edekalil Posted March 13, 2017 Report Share Posted March 13, 2017 Good luck with. 1 Quote Link to comment
yenpit Posted March 14, 2017 Report Share Posted March 14, 2017 Are the brake rotors vented? If vented, then you should have the correct 280ZX (not 280Z!!) strut assemblies......not a guarantee, but quick easy identification, cuz standard 240Z-280Z are solid rotors. If still in question, what datzenmike said ^^^^^ :crying: Yes, get the bump steer spacers if you don't have......aka RCA's. Yes, get adjustable upper camber plates if you don't have. Yes, the strut insert/cartridge is held in the strut tube by a big flat "nut" (aka gland nut). Pull the coilover spring off, look for a big "nut" at the very top of the strut tube, just above the coilover threaded sleeve, with the strut shaft poking up thru it. We can't see......the coilover springs are hiding it! 1 Quote Link to comment
Redrumls Posted March 14, 2017 Author Report Share Posted March 14, 2017 Thanks yenpit.. this is my first time lowering a 510. Trying to figure out if what I have will work. I'll get some pics of the brakes & rotors too when I get a chance. Greg Quote Link to comment
mrbigtanker Posted March 14, 2017 Report Share Posted March 14, 2017 Take a pic of all that you have so we can help. 1 Quote Link to comment
Redrumls Posted March 14, 2017 Author Report Share Posted March 14, 2017 Will do.. thanks, again Quote Link to comment
edekalil Posted March 19, 2017 Report Share Posted March 19, 2017 Oics, Oics, Oics! Quote Link to comment
Busta Nut Posted March 21, 2017 Report Share Posted March 21, 2017 Hard to say what exactly they're out of but you are missing a couple things......... Pic with stock strut mounts.........these are 280zx but same shit........ ....with camber plates....... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.